• 제목/요약/키워드: Pyro

검색결과 163건 처리시간 0.029초

ATR FT-IR과 pyro-GC/MS를 이용한 다층박막필름의 분석 (Analysis of Multi-layered Thin Film Using ATR FT-IR and pyro-GC/MS)

  • 박성일;이정현;이명천
    • 접착 및 계면
    • /
    • 제20권3호
    • /
    • pp.102-109
    • /
    • 2019
  • PET기재 필름 위에 코팅된 다층박막 필름의 층별성분을 ATR FT-IR과 Pyro GC/MS(Gas Chromatography/Mass Spectroscopy)를 이용하여 분석을 시도하였다. 필름의 단면은 액체질소에 담근 후 파괴시켜 얻었으며 광학 현미경을 이용하여 관찰하였다. 이 결과 코팅층의 총 두께는 $70{\mu}m$였으며 3개의 층으로 관찰되었다. 각 층의 두께는 너무 얇기 때문에 표면층을 제외하고는 직접분석이 어려워 적절한 용매로서 각 층을 드러나게 한 후 ATR FT-IR과 pyro-GC/MS를 이용하여 분석을 시도하였다. 이 결과 3개 층은 공통적으로 우레탄-아크릴레이트 공중합체로 밝혀졌다. 또한 무기 혹은 금속성분의 첨가여부는 XPS와 SEM-EDAX를 이용하여 분석하였으며 도장층 (1)에는 나노크기의 실리카 입자가 도장층 (2)에서는 알루미늄 박편이 존재함을 알게 되었다.

Fissile Measurement in Various Types Using Nuclear Resonances

  • YongDeok Lee;Seong-Kyu Ahn
    • 방사성폐기물학회지
    • /
    • 제21권2호
    • /
    • pp.235-246
    • /
    • 2023
  • Neutron resonance transmission technique was applied for assaying isotopic fissile materials produced in the pyro-process. In each process of the pyro-process, a different composition of the fissile material is produced. Simulation was basically performed on 235U and 239Pu assay for TRU-RE product, hull waste, and uranium addition. The resonance energies were evaluated for uranium and plutonium in the simulation, and the linearity in the detection response was examined on the fissile content variation. The linear resonance energies were determined for the analysis of 235U and 239Pu on the different fissile materials. For enriched TRU-RE assay, the sample condition was suggested; The sample density, content, and thickness are the key factors to obtain accurate fissile content. The detection signal is discriminated for uranium and plutonium in neutron resonance technique. The transmitted signal for fissile resonance has a direct relation with the content of fissile. The simulation results indicated that the neutron resonance technique is promising to analyze 235U and 239Pu for various types of the pyro-process material. An accurate fissile assay will contribute toward safeguarding the pyro-processing system.

KSR-III에 적용되는 로켓 이탈 장치(RRD) Pyro의 전기적 특성 (Electrical characteristics of Rocket Release Device(RRD) Pyro applied to KSR-III)

  • 김준규;마근수;이재득
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 B
    • /
    • pp.1061-1063
    • /
    • 2002
  • In this paper, the characteristics of the pyro unit applied to rocket release device in KSR-Ill are analyzed by experimental results, which are the current and voltage waveforms of the battery used as energy source. The precision design approach of the rocket release device can be achieved since the behavior and the required energy of the pyro are identified through the results.

  • PDF

파이로 프로젝트에 프로젝트 관리 적용 방안 (Application of Project Management on Pyro Project)

  • 김정국;김혁종;고원일;구정회;남효온
    • 시스템엔지니어링학술지
    • /
    • 제13권2호
    • /
    • pp.26-33
    • /
    • 2017
  • Pyro project, one of complex project, is now under research and development. To manage this kind project successfully, it is essential to apply the processes of technical management (TM) based on systems engineering (SE) and project management (PM). In this paper, the project management processes from ISO-21500 standard, PMBOK guide, and PRINCE2 guide were reviewed, and then some common PM for the large national R&D project were selected. An integrated technical management and project management frame work was finally established and suggested for Pyro project.

고체 고온공정에서 효율적 에너지 관리 - (1) 공정 열정산 및 평가 방법 (Efficient Energy Management for Pyro-processing of Solids - (1) Heat & Mass Balance and Evaluation)

  • 하대승;최상민
    • 한국연소학회지
    • /
    • 제21권1호
    • /
    • pp.18-30
    • /
    • 2016
  • Pyro-process of solids is the way to heat solid materials under high temperature. In this processing, energy efficient use is one of the main concerns due to its high energy consumption of bulk materials. To calculate the energy use of processes, heat & mass balance in simplified 0-dimensional model was performed. Energy calculation by this simplified model can lead to confusion due to simplification. Thus, it is necessary to understand considerations of energy analysis. In this study, cement manufacturing as a very common example of pyro-processing of solids, was introduced for explaining considerations of energy analysis for energy efficient use.

복합재 샌드위치 패널 발사관의 폭발충격 영향도 분석 (The Effect of Pyro Shock on Canister with Composite Sandwich Panel)

  • 최원홍
    • 한국소음진동공학회논문집
    • /
    • 제26권6_spc호
    • /
    • pp.667-673
    • /
    • 2016
  • Canister with composite sandwich panel has been suggested owing to its higher stiffness and strength over a weight for square shaped canisters. The pyro shock induced by a short time explosion inside a canister is generally considered to be the most severe source of load affecting on the entire structure. Therefore, in this study, the approach and modeling method to identify the effect of pyro shock on canister with composite sandwich panel in a numerical way were mainly discussed. Moreover, the verification was implemented through comparison with test results.

혼합 인산염의 첨가가 어류연육의 기능적 성질에 미치는 영향 (Effects of Phosphate Complex on the Functional Properties of Fish Meat Paste)

  • 김동수;김영명;김일환;이병준
    • 한국식품과학회지
    • /
    • 제17권4호
    • /
    • pp.253-257
    • /
    • 1985
  • 인산염의 첨가가 조기 및 갈치연육의 보수력 및 단백질의 용출성에 미치는 영향과 가열처리 후에 조기육을 원료로 가공한 어묵의 texture에 미치는 영향을 조사하기 위하여 인산염을 첨가하지 않은 대조구와 4종의 시판 복합 인산염을 첨가수준별로 사용 했을때의 기능적 성질을 분석 검토 하였다. 연육의 보수력 및 염용성 단백질량은 조기연육에는 인산염B(sodium poly-phosphate 50%. sodium Poly-Phosphate20%, sodium tetra meta-Phosphate 20%, sodium acid pyro-phosphates%, sodium ultra meta-phosphate 5%)를 갈치연육에는 인산염C(sodium poly-phosphate40%, sodium pyro-phosphate 30%, potassium pyro-phosphate 15%, sodium tetra meta-phosphate10%, sodium hexa meta-phosphates%)를 각각 0.4% 첨가한 경우가 가장효과적 이였고 그때의 염용성 단백질의 용출량은 조기연육이 954mg%, 갈치연육이 686mg%였다. 조기육을 원료로 하여 가공한 어묵의 적정가열 조건은 $85^{\circ}C$에서 45분간 가열한 것이 조직감이 양호 하였다. 한편 $121^{\circ}C$에서 10분간 가열한 경우는 C인산염이 다른 인산염에 비하여 어육 단백질의 열 안정성이 높은 것으로 나타났다.

  • PDF

대형 국가 R&D 프로젝트의 기술관리 프로세스 : 파이로 프로젝트를 중심으로 (Technical Management Processes for Large National R&D Projects : Focused on Pyro Project)

  • 김정국;고원일;구정회;남효온
    • 시스템엔지니어링학술지
    • /
    • 제13권2호
    • /
    • pp.34-41
    • /
    • 2017
  • The Pyro project, one of the large national R&D project to construct Korea Advanced Pyroprocessing Facility (KAPF), which has many goals such as development of pyro technology and process equipment, design of equipment and facility, construction, and test operation, is now under research and development. To reduce uncertainty and risk of such complex project, the technical management processes in systems engineering standards and NASA handbook were reviewed, and then the ten common technical management processes were selected for the large national R&D project to meet its goal successfully. And the essential technical management processes were finally suggested for Pyro project in consideration of current situation of the project.

터보펌프 시동기용 추진제 개발 (Development of Propellant for Turbopump Pyro Starter)

  • 송종권;최성한;홍문근;이수용
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.7-10
    • /
    • 2009
  • 우주발사체용 액체추진제 로켓엔진을 시동할 때 사용되는 터보펌프 시동기에 적용하고자 고체추진제 개발 및 특성 평가를 수행하였다. 터보펌프 시동기용 추진제의 배출가스는 기계적인 부식 또는 대기오염 등의 이유로 화염온도가 낮아야 하고 고체입자 잔사 및 독성이 적은 것이 바람직하며, 작동시간이 어느 정도 유지가 되어야 하기 때문에 비교적 낮은 연소속도가 필요하다. 본 연구에서는 PCP계열의 바인더를 사용하고 oxygen balance나 점화성에서 유리한 DHG(Dihydroxy glyoxime)을 냉각제를 사용하는 추진제 조성을 개발하여 연소속도와 기계적 물성 등의 특성평가를 실시하였으며, 최종적으로는 지상연소시험을 통하여 터보펌프 시동기의 성공적인 개발 가능성을 입증하였다.

  • PDF

발사체 가압시스템용 극저온 헬륨가스 파이로밸브 개발시험 (Development Test of Pyro-Valve for Cryogenic Gaseous Helium in Pressurization System of Launch Vehicle)

  • 정용갑;한상엽;조인현
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 제33회 추계학술대회논문집
    • /
    • pp.293-297
    • /
    • 2009
  • 극저온 가압제를 사용하는 가압시스템에서 가압제의 공급을 차단하기 위하여 많이 사용되고 있는 밸브로는 공압구동밸브나 솔레노이드밸브, 파이로밸브 등이 있다. 공압구동밸브와 솔레노이드밸브는 파이로밸브에 비하여 구조가 복잡하고 무게가 무거운 단점이 있어, 본 연구에서는 극저온 및 고압에 적용이 가능하고 구조가 비교적 간단하고 무게가 가벼운 극저온 헬륨가스용 파이로밸브를 개발하여 내압 및 기밀시험과 진동시험, 극저온 공급시험을 수행하였다.

  • PDF