• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.406-410
• /
• 2008

The properties of pyrolytic carbon (PyC) deposited from $C_2H_2$ and a mixture of $C_2H_2/C_3H_6$ on $ZrO_2$ particles in a fluidized bed reactor were studied by adjusting the deposition temperature, reactant concentration, and the total gas flow rate. The effect of the deposition parameters on the properties of PyC was investigated by analyzing the microstructure and density change. The density could be varied from $1.0\;g/cm^3$ to $2.2\;g/cm^3$ by controlling the deposition parameters. The density decreased and the deposition rate increased as the deposition temperature and reactant concentration increased. The PyC density was largely dependent on the deposition rate irrespective of the type of the reactant gas used.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.44-57
• /
• 2002

In this paper we study two vector-valued process capability indices $C_{p}$＝($C_{px}$, $C_{py}$ ) and $C_{pk}$＝( $C_{pkx}$, $C_{pky}$) considering process capability indices $C_{p}$ and $C_{pk}$. First, we derive two asymptotic distributions of plug-in estimators (equation omitted) and (equation omitted) under. some proper. conditions. Second, we examine the performance of asymptotic confidence regions of our process capability indices $C_{p}$＝( $C_{px}$ , $C_{py}$ ) and $C_{pk}$＝( $C_{pkx}$, $C_{pky}$) under BN($\mu$$_{x}$, $\mu$$_{y}$, $\sigma$$^2$$_{x}$, $\sigma$$^2$$_{y}$,$\rho$)$\rho$)EX>)EX>)EX>)

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1899-1902
• /
• 2009

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.565-572
• /
• 2013

The fabrication methods and requirements of the fiber, interphase, and matrix of nuclear grade $SiC_f/SiC$ composites are briefly reviewed. A CVI-processed $SiC_f/SiC$ composite with a PyC or $(PyC-SiC)_n$ interphase utilizing Hi-Nicalon Type S or Tyranno SA3 fiber is currently the best combination in terms of the irradiation performance. We also describe important material issues for the application of SiC composites to LWR fuel cladding. The kinetics of the SiC corrosion under LWR conditions needs to be clarified to confirm the possibility of a burn-up extension and the cost-benefit effect of the SiC composite cladding. In addition, the development of end-plug joining technology and fission products retention capability of the ceramic composite tube would be key challenges for the successful application of SiC composite cladding.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.9
• /
• pp.1237-1246
• /
• 2013

The objective of this study was to estimate variance components and genetic parameters for lactation milk yield (LY), lactation length (LL), average milk yield per day (YD), initial milk yield (IY), peak milk yield (PY), days to peak (DP) and parameters (ln(a) and c) of the modified incomplete gamma function (MIG) in an Ethiopian multibreed dairy cattle population. The dataset was composed of 5,507 lactation records collected from 1,639 cows in three locations (Bako, Debre Zeit and Holetta) in Ethiopia from 1977 to 2010. Parameters for MIG were obtained from regression analysis of monthly test-day milk data on days in milk. The cows were purebred (Bos indicus) Boran (B) and Horro (H) and their crosses with different fractions of Friesian (F), Jersey (J) and Simmental (S). There were 23 breed groups (B, H, and their crossbreds with F, J, and S) in the population. Fixed and mixed models were used to analyse the data. The fixed model considered herd-year-season, parity and breed group as fixed effects, and residual as random. The single and two-traits mixed animal repeatability models, considered the fixed effects of herd-year-season and parity subclasses, breed as a function of cow H, F, J, and S breed fractions and general heterosis as a function of heterozygosity, and the random additive animal, permanent environment, and residual effects. For the analysis of LY, LL was added as a fixed covariate to all models. Variance components and genetic parameters were estimated using average information restricted maximum likelihood procedures. The results indicated that all traits were affected (p<0.001) by the considered fixed effects. High grade $B{\times}F$ cows (3/16B 13/16F) had the highest least squares means (LSM) for LY ($2,490{\pm}178.9kg$), IY ($10.5{\pm}0.8kg$), PY ($12.7{\pm}0.9kg$), YD ($7.6{\pm}0.55kg$) and LL ($361.4{\pm}31.2d$), while B cows had the lowest LSM values for these traits. The LSM of LY, IY, YD, and PY tended to increase from the first to the fifth parity. Single-trait analyses yielded low heritability ($0.03{\pm}0.03$ and $0.08{\pm}0.02$) and repeatability ($0.14{\pm}0.01$ to $0.24{\pm}0.02$) estimates for LL, DP and parameter c. Medium heritability ($0.21{\pm}0.03$ to $0.33{\pm}0.04$) and repeatability ($0.27{\pm}0.02$ to $0.53{\pm}0.01$) estimates were obtained for LY, IY, PY, YD and ln(a). Genetic correlations between LY, IY, PY, YD, ln(a), and LL ranged from 0.59 to 0.99. Spearman's rank correlations between sire estimated breeding values for LY, LL, IY, PY, YD, ln(a) and c were positive (0.67 to 0.99, p<0.001). These results suggested that selection for IY, PY, YD, or LY would genetically improve lactation milk yield in this Ethiopian dairy cattle population.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.2
• /
• pp.175-189
• /
• 2012

The purpose of this study was to investigate the relationship between pack-years of smoking, metabolic biomarkers, and diet quality in male adults. We analyzed data from the combined 2007-2009 Korean National Health and Nutrition Examination Survey (KNHANES). The extent of smoking was quantified in pack-years (py), with 1 py equivalent to 20 cigarettes per day for 1 year. Subjects (n=1,318) were recruited and divided into two groups according to age (30~49 years age group, n=695; ${\geq}50$ years age group, n=623). In ach age group, subjects were divided into three groups according to the extent of smoking, which included non-smokers (30~49 years, n=156; ${\geq}50$ years, n=217), light smoker (30~49 years, n=269; py<16; ${\geq}50$ years, n=189, py<31), and moderate smoker (30~49 years, n=270; $py{\geq}16$; ${\geq}50$ years, n=217, $py{\geq}31$). The Nutrient Adequacy Ratio (NAR) and the number of foods (Dietary Variety Score, DVS) were analyzed by using the data from the 24-recall method. The results showed that moderate smokers were significantly more likely to drink alcohol compared with the other two groups. Triglyceride and cholesterol levels were significantly higher in smoker groups. The non-smoker group consumed significantly higher levels of vitamin C and potassium compared to the smoker groups. In the diet quality, vitamin C NAR of non-smoker group was significantly higher than those of smoker groups. In the ${\geq}50$ age group, the MAR of nonsmoker, light, and moderate smoker groups were 0.81, 0.78, and 0.78 respectively. The smoker group consumed significantly greate sugar and oils compared to the non-smoker group. Py showed a significantly positive relationship with serum triglyceride level, and a negative relationship with MAR after adjusting for potential confounding factors. In conclusion, male moderate smokers take too little vitamin C, partly due to low diet quality. Therefore, a well-planed diet must be used to replace the nutrients lost from excluded food groups in smoker.

• Annual Conference of KIPS
• /
• 2006.05a
• /
• pp.669-672
• /
• 2006

고온가스냉각 원자로에서는 고온 안정성 및 핵분열생성물 차단 성능이 우수한 TRISO(tri-tsotropic) 핵연료를 사용하고 있다. TRISO 핵연료 입자는 직경이 약 1 mm인 구 형태로 입자의 중심에는 직경 $0.5{\mu}m$의 핵연료 커널(kernel)이 포함되며 커널 외곽을 코팅 층이 에워싸고 있다. 이 코팅 층은 완충(buffer) PyC(pyrolytic carbon) 층, 내부 PyC 층, SiC 층, 그리고 외부 PyC 층으로 구성되어 있다. 각 코팅 층의 두께는 수십${\sim}$백 ${\mu}m$ 범위이며, 본 연구에서는 각 코팅 층의 두께를 비파괴적으로 측정하기 위하여 마이크로포커스 X-선 발생장치와 고해상도 X-선 평판(flat panel) 검출기로 구성된 정밀한 X-선 래디오그래피 장치를 구성하고, $UO_2$ 핵물질 대신에 $ZrO_2$를 커널로 사용한 모의 TRISO 핵연료 입자에 대한 래디오그래피 영상을 획득한 후 디지털 영상처리기술을 이용하여 코팅 층 사이의 경계선이 구분 가능하도록 영상을 개선하고 디지털 영상처리 알고리즘을 개발하여 코팅 층의 두께를 측정하였다.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.36-40
• /
• 2005

TRISO (Tri-Isotropic)-coated fuel particle is widely applied due to its higher stability at high temperature and its efficient retention capability for fission products in the HTGR (high temperature gas-cooled reactor), one of the highly efficient Generation IV reactors. The typical ball-type TRISO-coated fuel particle with a diameter of about 1 mm is composed of a nuclear fuel particle as a kernel and of outer coating layers. The coating layers consist of a buffer PyC, inner PyC, SiC, and outer PyC layer. In this study, a digital image processing algorithm is proposed to automatically measure the thickness of the coating layers. An FBP (filtered backprojection) algorithm was applied to reconstruct the CT image using virtual X-ray radiographic images for a simulated TRISO-coated fuel particle. The automatic measurement algorithm was developed to measure the coating thickness for the reconstructed image with noises. The boundary lines were automatically detected, then the coating thickness was circularly by the algorithm. The simulation result showed that the measurement error rate was less than 1.4%.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.256-265
• /
• 2011

Ambers have been used as a gemstone and a religious object since the ancient times and found in several archaeological sites in Korea. To prepare an enhanced conservation measures, we surveyed the chemical and spectroscopic properties of the ambers according to the provenance. Total 14 amber samples were collected from 6 different provenances including Baltic, Chiapas, Colombian, Dominican, Fushun and Madagascar amber. Infrared (IR) spectroscopic analysis was conducted for the non-destructive examination of the amber samples. They were also analyzed with pyrolysis/GC/MS (py/GC/MS) at the pyrolysis temperature of $300^{\circ}C$ with the on-line derivatization to trimethylsilyl ester. Baltic shoulder corresponding to the absorption at $1250cm^{-1}{\sim}1150cm^{-1}$ appeared in the IR spectrum of Baltic amber. IR spectra of the other ambers also showed somewhat distinctive characteristic peaks. In py/GC/MS analysis peaks assignable to succinic acid, dehydroabietic acid and pimaric acid were detected, which are known to be the components of the amber. In the meanwhile, the presence of compounds appearing in certain amber will be applied to differentiate the provenances of amber relics if their fragments are available for the analysis. These results are expected to help the confirmation of archaeological amber relics and archaeometric interpretation of provenances and manufacturing techniques.

• Archives of Pharmacal Research
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1997

We determined the microviscosity of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine cerebral cortex and liposomes of total lipids (SPMTL) and phospholipids (SPMPL) extracted from SPMV. Changes in the microviscosity induced by the range and rate of lateral diffusion were measured by the intramolecular excimerization of 1, 3-di(1-pyrenyl)propane (Py-3-Py). The microviscosity values of the direct probe environment in SPMV, SPMTL and SPMPL were 38.17, 31.11 and 27.64 cP, respectively, at$37^{\circ}C$and the activation energies $(E_a)$ of the excimer formation of Py-3-Py in SPMV, SPMTL and SPMPL were 8.236, 7.448 amd 7.025 kcal/mol, respectively. Probe location was measured by polarity and polarizability parameters of the probe Py-3-Py and probe analogues, pyrene, 1-pyrenenonanol and 1-pyrenemethyl-3${\beta}$-hydroxy-22, 23-bisnor-5-cholenate (PMC), incorporated into membranes or solubilized in reference solvents. There existed a good linear relationship between the first absorption peak of the $^1_a$ band and the polarizability parameter $(n^{2}-1)/(2n^{2}+1)$.The calculated refractive index values for SPMV, SPMTL and SPMPL were close to 1.50, which is higher than that of liquid paraffin (n=l.475). The probe location was also determined by using a polarity parameter $(f-1/2f^{I})$. Here f=$({\varepsilon}-1)/(2{\varepsilon}+1)$ is the dielectric constant function and $f^I=(n^2-1)/(2n^2+1)$ is the refractive index function. A correlation existed between the monomer fluorescence intensity ratio and the solvent polarity parameter. The probes incorporated in SPMV, SPMTL, and SPMPL report a polarity value close to that of 1-hexanol $({\varepsilon}=13.29)$. In conclusion, Py-3-Py is located completely inside the membrane, not in the very hydrophobic core, but displaced toward the polar head groups of phospholipid molecules, e.g., central methylene region of aliphatic chains of phospholipid molecules.