• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1481-1489
• /
• 2016

A art from the typical data services based on 1:1 data communications, various new services based on 1:N communications have recently appeared. These services are becoming to require advanced 1:N communication schemes which can transfer the same data to many receivers efficiently and in high-performance. Especially, a Push-To-Talk (PTT) service, which is an important service in public safety communication system, requires a service server to disseminate the same voice media data to multiple receivers in a group in real-time and low latency. In this paper, we propose an efficient scheme to disseminate the same data to multiple receivers in low latency. In addition, we provide an analysis which gives a guide the performance of the 1:N communications in practical wired/wireless system environments in the perspective of the PTT service index.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.77-82
• /
• 2004

Quantifying rates of microbial processes under subsurface conditions is difficult, and is most commonly approximated by laboratory studies using aquifer materials. In this study a single-well, 'push-pull' test method is adapted for the in situ determination of denitrification rates in groundwater aquifers. The rates of stepwise reduction of nitrate to nitrite, nitrous oxide, and molecular nitrogen were determined by performing a series of push-pull tests at an experimental well field of Korea University. A single Transport Test, one Biostimulation Test, and four Activity Tests were conducted for this study. Transport tests are conducted to evaluate the mobility of solutes used in subsequent tests. These included bromide (a conservative tracer), fumarate (a carbon and/or source), and nitrate (an electron acceptor). At this site, extraction phase breakthrough curves for all solutes were similar, indicating apparent conservative transport of the solutes prior to biostimulation. Biostimulation tests were conducted to stimulate the activity of indigenous heterotrophic denitrifyinc microorganisms. Biostimulation was detected by the simultaneous production of carbon dioxide and nitrite after each injection. Activity tests were conducted to quantify rates of nitrate, nitrite, and nitrous oxide reduction. Estimated zero-order degradation rates decreased in the order nitrate '||'&'||'gt; nitrite '||'&'||'gt; nitrous oxide. The series of push-pull tests developed and field tested in this study should prove useful for conducting rapid, low-cost feasibi1ity assessments for in situ denitrification in nitrate-contaminated aquifers.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.207-212
• /
• 2004

This paper provides the higher user QoS(Quality of Service) by analyzing media service model between server and client in single VoD(Video on Demand) environment and applying it to parallel VoD environment. Media service model is divided into the Client Pull, Server Push, and IPP(Interleaving Pull & Push) model. A server sends data based on client's request in the Client Pull Model. A server one-sidedly sends data without client's request in the Server Pull model. And the WP model unites above two models. For a parallel VoD environment, We built the PMSS system which provides the parallel media streaming services that one client is simultaneously served by several servers. In the single and parallel VoD environment, We compare and analyze the performance of service models with respect to network delay and data size in buffer. In this experiment, we found that IPP service model keeps the least network delay and stable client buffer in the parallel VoD environment. This result shows that PMSS can provide the more quality of service.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.2
• /
• pp.35-45
• /
• 2007

The purpose of this study was to examine spiral way movement of a trunk exerts on the movement ability. The details established to achieve for this article. This examination confirmed the weight, weight/height2 index, ratio of lumbar to pelvic, musculoskeletal quantity, push up for 2 minute, pitch a ball and voluntary isometric contraction with flexion and extension of knee joint of the subjects with spiral direct movement. Healthy eighteen subjects who understand fully the significance of procedure, consented to a plan, without neuromuscular disease were participated in two groups of experiment. The group were a spiral movement(9), rectilinear movement(9). Trunk movement tested 2 sessions of a spiral movement and rectilinear movement with a push up for 2 minute, 5days per a week, for the 4 weeks. This experiment tested 3 times with a sufficient rest for fatigue limitation. An analysis of the results used a paired samples t-test for difference from before and after experiment. The following results were obtained; At an internal change of the body, the musculoskeletal quantity was increased significantly to spiral movement group, but the weight was increased significantly, the musculoskeletal quantity was not significant to rectilinear movement. The movement ability evaluation for a external change was increased significantly in a push up for 2 minute, pitch a ball, isometric contraction with extension of knee joint of a spiral movement group, but a push up for 2 minute was increased significantly in a push up for 2 minute on the abdominal muscle training of a rectilinear movement group. As compared with a rectilinear movement, a spiral movement was more effect by cooperation with nerve and musculoskeletal system and an increase in movement ability was caused by learning acknowledgment, muscular reeducation. These results lead us to the conclusion that a spiral movement of trunk was more effect than a rectilinear movement, the coordination of nerve and musculoskeletal system was of importance of Multi-direction movement. Therefore, A further studies concerning the therapeutic exercise intervention and active-dynamic analysis could enhance the development of the most effect on the trunk.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.2
• /
• pp.75-86
• /
• 2000

In this study, the characteristics of transmitted vibration on HAS(hand-arm system) were identified to evaluate physical load due to the work surface orientation, tool weight and push force during powered drilling tasks. The characteristics of transmitted vibration on work surface orientation showed that the acceleration of transmitted vibration on horizontal work surface was higher than that on the vertical work surface. Regarding the characteristics of transmitted vibration on tool weight, the vibration acceleration level becomes lower as the tool weight becomes heavier. The amount of transmitted vibration on hand-arm system was decreased down to the tool weight of 2.4kg. However, as the tool weight becomes heavier than 2.8kg, the amount of transmitted vibration was increased and had peak value at 3.2kg of tool weight. Regarding the characteristics of transmitted vibration on push force, the vibration acceleration level goes higher, as the push force becomes larger. The characteristics of transmitted vibration on the axis of vibration showed that the direction of $Z_h$ had the highest acceleration compared to the direction of $X_h$, and $Y_h$. The direction of $X_h$, $Y_h$ and $Z_h$ had the highest acceleration of transmitted vibration on the hand, wrist and elbow, respectively. The results of this study showed that the condition which affect the lowest physical load to the subject on the powered drilling task would be working with the 2.4kg of tool weight on the vertical work surface.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.588-593
• /
• 2014

Recently, the smart devices has been possessed by a large majority of the adult, and offered various personalization services. This paper proposed the lightweight Intelligent Image Security System that notice the existence of any intruder in real time at the place of requiring the security by using smart device. The proposed image security system recognized whether or not intruder exists using the difference frame on the basis of Integral Image and the dynamic background updating algorithms. The intrusion notification is achieved by using the GCM push server that send massages in the application unit of user mobile device, and the SMTP mail server which is use of e-mail standard protocol. In case of the occurrence of intruder, GCM push server send an push-massage by the private mobile device, and SMTP mail server send the intruder's photograph and intrusion time. By the convergence of the various image processing algorithms and the performance of smart device, The proposed image security system can be applied to the various Intelligent Image Security field.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.955-955
• /
• 1995

• IE interfaces
• /
• v.10 no.3
• /
• pp.209-216
• /
• 1997

This mixed push and pull production system defines that all stages are not ordered by either of the production systems. Some stages are ordered by a push-type production system and the other stages are ordered by a pull-type production system. A decision support system is built by using a combination of optimization program and the "tunable" SIMAN discrete-event simulation for the implementation of an optimally mixed production system. Finding this optimal system requires 6 CPU hours for the case study on a Pentium. Both the simulation and optimization model are validated with a case study of Phoenix company that manufactures transmitters. This paper uses survey from experts in this company for evaluation and validation of this system.

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2000

This study was carried out to develop gripper which to adaptive variable tray and to develop automatic transplanting system for seedling-production system between tray. This system consisted of five set of gripper and end-effector, a planting-width control unit, a tray transfer unit, and gripper moving device which move gripper between nursing tray and growing tray. This system used push-out rod to grasp plant instead of pull-out end -effector. Several types of fingers, which physically grip seedlings, were also developed and tested to ensure reliable transplanting operation of the gripper. The transplanting system detaches seedlings from a tray with push-o0ut rods, which were installed under the tray transfer unit. The performance of the transplanting system was evaluated by successive transplanting experiments. Using the best type of finger , the transplanting system produced 94.6% of transplanting success rate.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.405-411
• /
• 2013

Objective: Product design process without considering the strength of the user can cause the excessive burden on musculoskeletal system of human body. Since the muscle strength will vary depending on the body posture, the design of product should consider the characteristics of body posture. This study was performed to investigate the effects of forearm postures on the push and pull strength. Background: Overexerted force has been identified to cause musculoskeletal disorders. It is important to know the push and pull strength exerted by human when designing so that exerted force does not exceed the safety limits. Method: Maximum isometric push and pull strength of left, right and both hands were measured according to forearm postures with pronation, neutral and supination. For the study, 66 male and 30 female undergraduate students were participated as subjects. All subjects were normal and healthy with no clinical history. Results: The results showed that the push strength of male and female were 93.3% and 85.4% of pull strength. It showed that the strength of one-hand was 72.1~81.0% of the strength of two-hands, and the strength of left hand was 93.1~95.8% of the strength of right hand. The strength of female was 62% of the one of male. It was found that the strength with pronation $90^{\circ}$ was reduced up to 20% compared to the strength with neutral posture. Conclusion: Push and pull strength of male and female were reduced when forearm was rotated extremely. Application: The results of this study will be used for the prevention of work related musculoskeletal disorders and design of industrial equipment.