Journal of the Ergonomics Society of Korea (대한인간공학회지)
- Volume 19 Issue 2
- /
- Pages.75-86
- /
- 2000
- /
- 1229-1684(pISSN)
- /
- 2093-8462(eISSN)
Determination of Recommendable Powered Drill Weight by the Characteristics of Transmitted Vibration on Hand-Arm System
전동드릴의 진동전달 특성에 따른 적정 드릴 무게의 결정
- Received : 2000.08.14
- Accepted : 2000.08.28
- Published : 2000.08.31
Abstract
In this study, the characteristics of transmitted vibration on HAS(hand-arm system) were identified to evaluate physical load due to the work surface orientation, tool weight and push force during powered drilling tasks. The characteristics of transmitted vibration on work surface orientation showed that the acceleration of transmitted vibration on horizontal work surface was higher than that on the vertical work surface. Regarding the characteristics of transmitted vibration on tool weight, the vibration acceleration level becomes lower as the tool weight becomes heavier. The amount of transmitted vibration on hand-arm system was decreased down to the tool weight of 2.4kg. However, as the tool weight becomes heavier than 2.8kg, the amount of transmitted vibration was increased and had peak value at 3.2kg of tool weight. Regarding the characteristics of transmitted vibration on push force, the vibration acceleration level goes higher, as the push force becomes larger. The characteristics of transmitted vibration on the axis of vibration showed that the direction of
Keywords
- Transmitted vibration;
- Hand-arm system;
- Push force;
- Vibration acceleration;
- Work surface orientation