• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1551-1562
• /
• 2014

To clarify the characteristics of TKE (Turbulence Kinetic Energy) variation for offshore wind power development, several numerical experiments using WRF were carried out in three different coastal area of the Korean Peninsula. Buoyancy, mechanical and shear production term of the TKE budget are fundamental elements in the production or dissipation of turbulence. Turbulent kinetic energy of the south coast region was higher than in other sea areas due to the higher sea surface temperature and strong wind speed. In south coast region, strong wind passing through the Korea Strait is caused by channelling effect of the terrain of the Geoje Island. Although wind speed is weak in east coast, because of large difference in wind speed between the upper and lower layer, the development of mechanical turbulence tend to be predominant. Since lower sea surface temperature and smaller wind shear were detected in west coastal region, the possibility of turbulence production not so great in comparison with other regions. The understanding of the characteristics of turbulence in three different coastal region can be reduced the uncertainty of offshore wind construction.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1143-1150
• /
• 2000

The effects of ambient conditions on vaporizing sprays from a high-pressure swirl injector were investigated by an exciplex fluorescence method. Dopants used were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to examine the behavior of liquid and vapor phases inside of vaporizing sprays, ambient temperatures and pressures similar to engine atmospheres were set. It was found that the ambient pressure had a significant effect on the axial growth of spray, while ambient temperature had a great influence on the radial growth. The spatial distribution of vapor phase at temperatures above 473K became wider than that of liquid phase after half of injection duration. From the analysis of the area ratio for each phase, the middle part (region II) in the divided region was the region which liquid and vapor phases intersect. For liquid phase, fluorescence-intensity ratio was greatly changed at lms after the start of injection. However, the ratio of vapor phase was nearly uniform in each divided region throughout the injection.

• Animal cells and systems
• /
• v.2 no.1
• /
• pp.117-122
• /
• 1998

D-raf, a Drosophila homolog of the human c-raf-1, is known as a signal transducer in cell proliferation and differentiation. A previous study found that the D-raf gene expression is regulated by the DNA replication-related element (DRE)/DRE-binding factor (DREF) system. In this study, we found the sequences homologous to transcription factor C/EBP, MyoD, STAT and Myc recognition sites in the D-raf promoter. We have generated various base substitutional mutations in these recognition sites and subsequently examined their effects on D-raf promoter activity through transient CAT assays in Kc cells with reporter plasmids p5'-878DrafCAT carrying the mutations in these binding sites. Through gel mobility shift assay using nuclear extracts of Kc cells, we detected factors binding to these recognition sites. Our results show that transcription factor C/EBP, STAT and Myc binding sites in D-raf promoter region play a positive role in transcriptional regulation of the D-raf gene and the Myo D binding site plays a negative role.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.193-199
• /
• 2015

This paper proposes a regeneration braking algorithm for Brushless DC (BLDC) motor system. The unipolar switching method has a limitation about the regeneration braking when the BLDC motor is operated in the low speed region. The proposed algorithm alternatively utilizes the unipolar and bipolar switching method to implement the regeneration braking for overall speed range. The bipolar switching method is used when the BLDC motor is operated in the low speed region. The switching transition point is determined by analyzing the unipolar and bipolar switching during the regeneration braking. The effectiveness of proposed algorithm is verified by using the experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1919-1921
• /
• 1998

In this paper, a control method for field weakening region of induction machine drive which is based on indirect field oriented control was implemented. Also, application method of direct field oriented control in the field weakening region using maximum torque control methods which is adaptable for parking facilities was studied. The implemented method which is based on direct field oriented control method ensures the full utilization of the output torque capability of the machine over the conventional 1/${\omega}_r$ method. And machine drive system can obtain the robustness to motor parameter variation.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.360-368
• /
• 1994

To this day, a number of quantitative analytical methods have been employed in clarifying regional characteristics in the discipline of geography. This paper attempted, as a part of application of those quantitative analyses, to make clear the urban functions and consequently the urban characteristics statistically by adopting newly-introduced CHAID, a sort of discriminant analyis technique. The processing of data was sonducted in two phases. To begin with, the urban functions were classified after designating twenty cities - the population of each city counting 250, 000 or more - as predictor variable, and at the same time four major urban functions like administration, marketing, finance and production as response variable. And then, preeminent functions of individual region were discriminated and concurrently classified by treating the remaining traffic, education, medicare, culture and transportation functions as predictor variable, and the following five regions as response variable: Metropolitan Seoul Area. Pusan region, Taegu region, Kwangju region and Chungcheong region. According to the result of this analysis, marketing and administration are emereed as meaningful functions in Seoul and Taegu respectively. As for the finance function only Pusan and Pucheon can be discriminated. Seoul, Pusan and Seongnam reveal their dominancy in production function. To take a look at the result of the latter analysis, the Metropolitan Seoul area shows, among other functions, strong traffic and finance functions. When it comes fo Pusan region, adminstration, education and finance functions are recorded as a leading ones, and Taegu region is preferable in education, medicare and transportation functions. In case of Kwangju region adminstration, production and education functions are discriminated from any other functions. Chungcheong region shows similar aspect with only traffic function replacing the production function of Kwangju region. Based on aforementioned anlysis, it can be said that the CHAID technique, which is capable of processing large amount of categorical data and, by presenting its outcome in the form of dendrogram, facilitates the interpretation work, is an effective, meaningful means to classify and discriminate certain geographical regions and their characteristics.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.258-259
• /
• 2010

• Atmosphere
• /
• v.24 no.2
• /
• pp.141-150
• /
• 2014

This study investigates the characteristics of the Gross Moist Stability (GMS) over the tropics. The GMS summarizes the relationship between large-scale entropy forcing due to radiation and surface fluxes and the response of smaller-scale convection. The GMS is able to explain both to where moist entropy is advected by the atmospheric circulation and how deep the moisture flux convergence is in the tropical region. In the deep convective region, positive GMS appears over the warm pool region due to the strong column-integrated moisture convergence and the ensuing export of moist entropy to the environment. The vertical advection of moist entropy dominates over the horizontal advection in this region. Meanwhile, over the eastern tropical ITCZ region, which is characterized by shallow convective area, import of moist entropy by horizontal winds is dominant compared to the vertical moist entropy advection. Future changes in the GMS are also examined using the 22 CMIP5 model simulations. A decrease in the GMS appears widely across the tropics, but its increase occurs over the western-central equatorial Pacific. It is evident that the increased GMS region corresponds to an increased region of precipitation, implying that strengthened convection in the future due to increased entropy forcing exports the enhanced moist energy to stabilize the environment.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.10-15
• /
• 2012

In conventional, skin detection methods using for skin color definitions is based on prior knowledge. By experimentation, the threshold value for dividing the background from the skin region is determined subjectively. A drawback of such techniques is that their performance is dependent on a threshold value which is estimated from repeated experiments. To overcome this, the present paper introduces a skin region detection method. This method uses a histogram approximation based on the mean shift algorithm. This proposed method applies the mean shift procedure to a histogram of a skin map of the input image. It is generated by comparing with the standard skin colors in the $C_bC_r$ color space. It divides the background from the skin region by selecting the maximum value according to the brightness level. As the histogram has the form of a discontinuous function. It is accumulated according to the brightness values of the pixels. It is then, approximated by a Gaussian mixture model (GMM) using the Bezier curve technique. Thus, the proposed method detects the skin region using the mean shift procedure to determine a maximum value. Rather than using a manually selected threshold value, as in existing techniques this becomes the dividing point. Experiments confirm that the new procedure effectively detects the skin region.

• Journal of Korea Foundry Society
• /
• v.16 no.6
• /
• pp.523-536
• /
• 1996

This paper relates to fabrication processing analysis of metal matrix composites by the injection of liquid metal into a fibrous preforms. One dimensional heat transfer analysis during squeeze infiltration process of aluminum base composites has been studied. An analysis method was investigated for the temperature distribution, infiltration velocity and melt infiltration characteristics with the commercial preform with short fiber array. When molten metal is infiltrated in a fibrous preform with random orientation, phase transformation will be occurred in a region such as molten metal, solidified region, preform region and infiltration composites region. a mathematical modelling for a solidification phenomena in fabrication process of metal matrix composites using a squeeze infiltration technique was investigated by the basic relations for liquid metal into a fibrous preform. The temperature distribution of theoretical results was compared with experimental data.