Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Development Behavior of Vaporizing Sprays from a High-Pressure Swirl Injector Using Exciplex Fluorescence Method

  • Choi, Dong-Seok (Research Institute of Mechanical Technology, Pusan National University) ;
  • Kim, Duck-Jool (Research Institute of Mechanical Technology, Pusan National University) ;
  • Hwang, Soon-Chul (Department of Mechanical Engineering, Pusan National University)
  • Published : 2000.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of ambient conditions on vaporizing sprays from a high-pressure swirl injector were investigated by an exciplex fluorescence method. Dopants used were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to examine the behavior of liquid and vapor phases inside of vaporizing sprays, ambient temperatures and pressures similar to engine atmospheres were set. It was found that the ambient pressure had a significant effect on the axial growth of spray, while ambient temperature had a great influence on the radial growth. The spatial distribution of vapor phase at temperatures above 473K became wider than that of liquid phase after half of injection duration. From the analysis of the area ratio for each phase, the middle part (region II) in the divided region was the region which liquid and vapor phases intersect. For liquid phase, fluorescence-intensity ratio was greatly changed at lms after the start of injection. However, the ratio of vapor phase was nearly uniform in each divided region throughout the injection.

Keywords

References

  1. Choi, D. S., Kim, D. J., and Ko, C. K., 1998, 'Transient Breakup Phenomena of Initial Spray from High-Pressure Swirl Injector,' Trans. of KSME (B), Vol. 22, No. 8, pp. 1132-1140, (in Korean)
  2. Choi, D. S., Park, H. H. and Kim, D. J., 1999, 'Measurement of Distribution and Concentration of Vapor/Liquid Phases in Gasoline Direct Injection Spray Using Exciplex Fluorescence Method,' Trans. of KSME (B), Vol. 23, No. 4, pp. 531-539, (in Korean)
  3. Ghandhi, J. B., Felton, P. G., Gajdeczko, B. F., and Brocco, F. V., 1994, 'Investigation of the Fuel Distribution in a Two-Stroke Engine with and Air-Assisted Injector,' SAE paper, No. 940394
  4. Han, Z. and Reitz, R. D., 1997, 'Internal Structure of Vaporizing Pressure-Swirl Fuel Sprays,' Proc. ICLASS-97, pp. 474-481
  5. Houston, R. and Cathcart, G., 1998, 'Combustion and Emissions Characteristics of Orbital's Combustion Process Applied to Multi-Cylinder Automotive Direct Injected 4-Stroke Engines,' SAE paper, No. 980153
  6. Ipp, W., Wagner, V., Krmer, H., Wensing, M., Leipertz, A., Arndt, S. and Jain, A. K., 1999, 'Spray Formation of High Pressure Swirl Gasoline Injectors Investigated by Two-Dimensional Mie and LIEF Techniques,' SAE paper, No. 1999-01-0498
  7. Lee, N. H., Park, J. H. and Choi, K. H., 1998, 'A Study on Fuel Spray of Spark-Ignited Direct Injection Engine Using Laser Image Technology,' KSME International Journal, Vol. 13, No. 3, pp. 286-293
  8. Melton, L. A., 1983, 'Spectrally Separated Fluorescence Emissions for Diesel Fuel Droplets and Vapor,' Applied Optics, Vol. 22, No. 14, pp. 2224-2226
  9. VanDerWege, B. A. and Hochgreb, S., 1998, 'The Effect of Fuel Volatility on Sprays from High-Pressure Swirl Injectors,' Int. Symp. COMODIA 98, pp. 505-510
  10. Wirth, M., Piock, W. F., Fraidl, G. K., Schoeggl, P. and Winklhofer, E., 1998, 'Gasoline DI Engines: The Complete System Approach by Interaction of Advanced Development Tools,' SAE paper, No. 980492
  11. Zhao, F. -Q., Lai, M. -C. and Harrington, D. I., 1997, 'A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engine,' SAE paper, No. 970627