• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.361-368
• /
• 2000

In other to examine the compressibility characteristics of cohesive soils in the mouth of the Nakdong river, the oedometer tests were peformed on undisturbed and reconstituted samples obtained by continuous boring typically at 3 different sites. It is meaningful to compare the consolidation behavior of natural clays with a reference state because the natural clays are depending on the stress history, sedimentary environment and geological history. In this study, the insitu state of the Pusan clays was investigated using the concepts of ISL(Nagaraj, 2000) and ICL and SCL(Burland, 1990). And for the purpose of confirming the existence of the underconsolidated clays, a standpipe type piezometer test and a dissipation test by piezocone were performed at their sites. Consequently, the Pusan clays were evaluated as normally consolidated clays.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.341-348
• /
• 2003

In the estuary of Nagdong River thick marine sediments were deposited by the Holocene marine transgression. The sediments largely consist of silty clay, which is called Pusan clays in the geotechnical field. This paper presents engineering geological characteristics of Pusan clays in Beombangdong area. Overall geological environmental changes based on several geological properties are discussed and synthesized as Geological Environmental Zones. And also, engineering properties of the clays in laboratory and field are discussed and synthesized as Engineering Zones. Two zones are correlated and engineering characteristics are evaluated in view of engineering geology.

• 자원환경지질
• /
• 제28권1호
• /
• pp.1-8
• /
• 1995

The smectite-rich clays were found locally in Paleozoic calcareous sedimentary rocks in the Samcheok area. Their occurrences were investigated in detail, and the physico-chemical properties of the clays were also determined by X-ray diffraction, chemical analysis, thermal analysis and cation exchanging experiment. The smectite clays occur as the fissure filling dyke developed in calcareous sedimentary rock and as alteration products of intrusive rhyolite. Most of clays occur at the contact between the sedimentary rock and the rhyolite, and the alteration zone was observed only in rhyolite body close to the contact. Judging from their occurrences, it is believed that the smectite-rich clays in this area were formed by the hydrothemal alteration. The smectite clays from the area are mainly composed of Ca-montmorillonite, and associated with small quantities of quartz, opal-CT and feldspar. The montmorillonites from this area are lower in Fe content, and higher in exchangeable Ca ion, compared to those of bentonite from the Yangnam-Yeongil area.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.295-307
• /
• 2002

낙동강하구 지역에는 두터운 점성토 퇴적지반이 넓게 분포되어 있다. 1990년대 초반부터 이러한 점성토 퇴적지반을 이용한 공업 및 주거단지 등의 확보를 위해 개발이 활발하게 진행되어 왔다. 이 과정에서 수많은 지반조사가 실시되었음에도 불구하고 이들 점성토 지반의 토질특성이 명확하게 규명되지 못했으며, 또한 잘못 결정된 토질정수로 인하여 지반침하 예측이 과소평가 되는 등의 문제점을 안고있다. 이러한 침하거동을 이해하기 위해서는 압축특성을 포함한 토질특성을 명확히 규명하는 것이 필요하다. 본 연구에서는, 부산점토의 압축특성을 규명하기 위하여 재구성된 시료와 불교란 시료를 이용하여 기본적인 물성시험과 압밀시험이 수행되었다. 물리적 특성으로부터 부산점토는 상부와 하부층의 구분이 뚜렷하게 나타나며, 퇴적환경이 서로 상이한 것을 알 수 있었다. Bluland(1990)와 Nagaraj(2000)의 연구를 배경으로 부산점토의 고유상태선과 현장압축곡선을 구할 수 있었으며, 부산점토가 고결작용이 발달된 장년기(young) 정규압밀 점토라는 것과 대개 2개의 성질이 다른 지층으로 구성되어 있다는 사실을 알 수 있었다. 또한 압축지수비(Tsuchida et.al.,1991)와 예민비(Leroueil et. al.,1983)로부터 고결효과를 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.530-535
• /
• 2006

The Pusan clays are soft and thick deposits and in some places, they reach even up to 50-70m. So, the pile foundations are inevitable in almost all cases. But they are significantly expansive when the length of the pile reaches about 70m. In this study, a comprehensive parametric study has been carried out in order to reduce the pile length and number of piles required in turn the cost of the foundation for particular building. A belled shaft pile has been optimized for a typical soil profile using the PLAXIS (FEM code). These results have shown a new direction of the pile foundation in Pusan, Korea. The results including the variation of contact pressures at the bottom of the bell, optimization of the angle of the bell and height of the bell in terms of the diameter of the shaft. And also, the design curves have been generated so that they can be directly used for design of belled shaft foundations. However, the structural strength criterion is being checked in the concerned laboratory.

• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.43-51
• /
• 2010

부산 인근에 위치한 낙동강 하구 일대에는 두터운 충적층이 약 100m 전후의 두께로 매우 두텁게 분포하고 있다. 지질학적 측면에서 살펴보면 약 20,000년 이전부터 퇴적이 시작되었던 것으로 예측되고 있다. 최근에 와서 이 일대에는 대단위 매립공사와 부지조성공사가 곳곳에서 수행되고 있어서 안전한 설계를 위해 명확한 지반특성, 특히 명확한 연약점성토의 비배수 전단강도의 규명이 절실히 필요한 상황이다. 그러나 이 지역 연약점성토의 분포심도가 매우 깊고 예민비가 큰 특성 등으로 인하여 이 지역을 대표하는 비배수 전단강도 특성을 아직까지 명쾌하게 규명하지 못하고 있는 실정이다. 이에 본 연구에서는 낙동강 하구 일대의 장유, 양산, 부산신항, 화전 그리고 신호 지역의 두텁게 퇴적되어 있는 점토층에서 불교란 시료를 채취하여 실내시험(일축압축시험, 비압밀비배수시험, 등방압밀 비배수압축시험, Ko압밀 비배수 압축시험 및 인장시험) 및 시료의 교란을 최소화 할 수 있는 현장시험(현장베인시험, 피에조콘관입시험)을 수행하여 비교 분석을 통하여 부산 점토의 비배수 전단강도 특성을 검토해 보았다.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.133-142
• /
• 2006

낙동강 하구지역에는 세계적으로 드물게 연약한 부산점토가 두껍게 분포하고 있다. 최근의 지반개량공사에서 압밀침하에 대한 과소평가 문제가 발생하여 이 점토의 투수특성에 대한 연구가 절실히 요구되고 있다. 따라서 본 연구에서는 그 점토의 투수특성을 규명하기 위한 목적으로 낙동강 하구의 두 지역을 연구대상현장으로 선정하여 불교란 시료채취를 실시하고 이 시료에 대하여 자연점토는 물론 연직 및 수평배수 압밀실험 중에 실내 변수두 투수실험에 의하여 연직 및 수평 투수계수를 측정하였다. 이 결과로부터 자연상태 및 압밀상태 하에서의 투수계수, 투수 이방성 및 그들의 상관관계 규명은 물론 해외의 다른 점토들에 대한 투수특성과의 비교를 수행하였다.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.366-372
• /
• 2013

Flexible polyurethane/clay porous nanocomposite foams were synthesized using natural and organically modified montmorillonite clays such as bentonite, closite 10A and closite 30B. The content of nanoclays was varied from 1 to 5 wt% of polyol. Dispersion of clay in Polyurethane(PU) matrix was investigated by X-ray diffraction(Cu-$K{\alpha}$ rays of wavelength $1.54{\AA}$) using an X-ray diffractometer. Also, we determined that the thermal resistance of PU foam increased with added clay, compared to that of pure PU foam. The cell size and the fraction of open cells of the precursor foam were controlled by the addition of clay to the polyurethane foam. Modified clays were found to be more efficient cell openers than the unmodified clay. In addition, the tensile strength and elongation of the polyurethane/clay porous nanocomposites were examined. Increasing clay content increased the mechanical properties of the composites, such as tensile strength, and elongation at break. However, increasing the content over 5 wt% deteriorated the properties of the composites. We found that the nanofillers(bentonite, closite 10A and closite 30B) improved the thermal stability of the nanocomposite foam. The nanocomposite foam containing 3 wt% of closite 30B exhibited the best tensile strength and thermal stability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 가을 학술발표회 논문집
• /
• pp.57-64
• /
• 1998

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.391-398
• /
• 2000

The index properties of cohesive soils play an important role to examine entire tendency of soil properties. Especially, the Atterberg limits have a good correlation with compression and shear strength of cohesive soils. However, these values strongly depend on their testing methods. In this study, for Pusan clays the Atterberg limits were peformed under different conditions; for example, four kinds of specimen preparation, two kinds of testing equipment, and four kinds of estimating method. And a laboratory vane test was peformed to compare the undrained shear strength with that of the fall cone test. As experimental results, the value of liquid limit performed for oven-dried sample, followed in ASTM D4318, underestimated by about 10% compared to those of another three methods, irrespective to the used equipments. But the value of plastic limit was not influenced by sample preparation methods and equipments. The liquid limits by one-point methods(Leroueil et al., 1996; Nagaraj et al., 1981) were agreed well with those of different methods. Finally, the undrained shear strength by laboratory vane test was relatively larger than that of fall cone test, and the relationship between both showed a bad trend.