• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.63-67
• /
• 2015

Purpose Among various causes that influence image quality degradation, various methods for decrease in Artifact occurred by respiration of patients are being used. Among them, this study intended to evaluate CTAC Shift correction method and additional scan compare to the Scan(Q static scan) using respiratory gated system. Materials and Methods This study was conducted on 10 patients, and used PET-CT Discovery 710 (GE Healthcare, MI, USA) and Varian's RPM system. 5.18 Mbq per kg of $^{18}F$-FDG was injected on patients, asked them to take a rest for 1 hour in the bed, and conducted test after urination. Images were visualized through Q static scan, CTAC Shift correction method, Additional scan based on the Whole body scan(WBS) with Artifact. Decrease in Artifact was compared in each image, conducted Gross Evalution, and measured changes of SUVmax. Results For image obtained through the CTAC Shift correction method through WBS with Artifact, 12~56%, Q static scan image showed 17~54% of change rate and Additional Scan showed -27~46% of change rate. In Blind Test, the CTAC Shift correction image showed the highest point with 4 points, Q static scan image showed 3.5 points, and Additional scan image showed 3.4 points. The standardized WBS scan through Oneway ANOVA and three types of Scan method showed significant difference(p<0.05), and did not show significant difference between the three Scan methods(p>0.05). However, the three Scan methods showed significant difference in Blind test. Conclusion Additional scan and Q static scan require more time than the CTAC Shift correction method, there is concern about excessive exposure to patients by CT rescan and Q static scan is difficult to apply on patients with inconsistent respiration or irregular respiration cycle due to pain. For CTAC Shift correction method, limited correction is possible and the range is limited as well. It is considered as a useful method of improving diagnostic value when hospitals use the system appropriately and develop various advantageous factors of each method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2012

Purpose: The present study has an objective of effectively separating and making observations on a portion of radiopharmaceutical excreted via digestive organ to remain in the organ and invade a heart shadow. Materials and methods: When heart shadow is blocked by the organ in tests during a resting phase and a loaded phase, additional images were obtained using immobilization device. The immobilization devices were used to tilt the upper body forward from supine position. Results: In the reconstructed image for the separated case, as compared with the case where a part of organ is overlapped with heart, in terms of an overall mean value for each parameter, the end-diastolic volume increased by 2.75 mL, the end-systolic volume decreased by 3.16 mL, the left ventricle cardiac coefficient increased by 3.58%, and the area of defect region decreased by 3.58 and 3.92 cm for loading and resting phase, respectively. Conclusions: In the present study with myocardial perfusion SPECT, overlapped areas of heart and other organs could be effectively separated and visualization by the use of an immobilization device.

• Radiation Oncology Journal
• /
• v.24 no.4
• /
• pp.285-293
• /
• 2006

$\underline{Purpose}$: This study was to search the optimal slice thickness of computed tomography (CT) in an intensity modulated radiation therapy plan through changing the slice thickness and comparing the change of the calculated absorbed dose with measured absorbed dose. $\underline{Materials\;and\;Methods}$: An intensity modulated radiation therapy plan for a head and neck cancer patient was done, first of all. Then CT with various ranges of slice thickness ($0.125{\sim}1.0\;cm$) for a head and neck anthropomorphic phantom was done and the images were reconstructed. The plan parameters obtained from the plan of the head and neck cancer patient was applied into the reconstructed images of the phantom and then absorbed doses were calculated. Films were inserted into the phantom, and irradiated with 6 MV X-ray with the same beam data obtained from the head and neck cancer patient. Films were then scanned and isodoses were measured with the use of film measurement software and were compared with the calculated isodeses. $\underline{Results}$: As the slice thickness of CT decreased, the volume of the phantom and the maximum absorbed dose increased. As the slice thickness of CT changed from 0.125 to 1.0 cm, the maximum absorbed dose changed ${\sim}5%$. The difference between the measured and calculated volume of the phantom was small ($3.7{\sim}3.8%$) when the slice thickness of CT was 0.25 cm or less. The difference between the measured and calculated dose was small ($0.35{\sim}1.40%$) when the slice thickness of CT was 0.25 cm or less. $\underline{Conclusion}$: Because the difference between the measured and calculated dose in a head and neck phantom was small and the difference between the measured and calculated volume was small when the slice thickness of CT was 0.25 cm or less, we suggest that the slice thickness of CT should be 0.25 cm or less for an optimal intensity modulated radiation therapy plan.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.216-224
• /
• 2005

Chromatography has now been used successfully to provide the requisite purity for human plasma-derived biop-harmaceuticals such as coagulation factors and immunoglobulins. Recently, increasing attention has been focused on establishing efficient cleaning procedures to prevent potential contamination by microorganisms as well as carry-over contamination from batch to batch. The purpose of present study was to develop a cleaning validation system for the assurance of virus removal and/or inactivation during chromatography process. In order to establish an assay system for the validation of virus clearance during chromatography cleaning process, a quantitative real-time PCR method for porcine parvovirus(PPV) was developed, since PPV, a model virus for human parvovirus B19, has a high resistance to a range of physico-chemical treatment. Specific primers for amplification of PPV DNA was selected, and PPV DNA was quantified by use of SYBR Green I. The sensitivity of the assay was calculated to be 1.5 $TCID_{50}/ml$. The established real-time PCR assay was successfully applied to the validation of PPV removal and cleaning during SP-Sepharose cation chromatography for thrombin purification and Q-Sepharose anion chromatography for factor VIII purification. The comparative results obtained by real-time PCR assay and infectivity titrations suggested that the real-time PCR assay could be a useful method for chromatography cleaning validation and that it could have an additive effect on the interpretation and evaluation of virus clearance during the virus removal process.

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.500-506
• /
• 2006

Purpose : We evaluated an outbreak of Serratia marcescens infections in 24 neonates in a neonatal intensive care unit(NICU). Methods : From January to August, 2004 a nosocomial outbreak of S. marcescens occurred in our NICU. We describe the clinical characteristics of the outbreak and analyse the risk factors for infections with S. marcescens. After the outbreak stopped, 7 isolates from blood were typed using rapid amplified polymorphic DNA analysis(RAPD). Results : S. marcescens was isolated from 24 neonates, 19 infected and 5 colonized. Seven out of nineteen neonates had bacteremia, 4 had ventilator associated pneumonia, 4 had purulent conjunctivitis, 2 had UTI, 1 had meningitis and 1 had a wound infection. Three neonates died due to S. marcescens infection, 2 of 3 had ventilator associated pneumonia, 1 had meningitis complicated with abscess. The mortality rate of S. marcescens infection was 15.8%. Factors associated with S. marcescens infections were previous antibiotic therapy, indwelling catheter and use of ventilators. The isolated strains were resistant to most antibiotics, but frequently sensitive to imipenem, bactrim and amikacin. RAPD typing results show that at least 3 epidemic strains were related with this outbreak. But one genotype was predominant type in this outbreak. The control measures were instituted and the outbreak stopped within 2 months. Conclusion : S. marcescens can cause rapidly spreading outbreaks associated with fatal infections in neonates. If S. marcescens is isolated from clinical specimens, meticulous infection control measures and epidemiologic investigations should be done at an early stage of the outbreak.

• Clinical and Experimental Pediatrics
• /
• v.52 no.7
• /
• pp.791-797
• /
• 2009

Purpose : We aimed to investigate the clinical manifestations of and antibiotic resistance in culture-proven childhood salmonellosis. Methods : Clinical manifestations and laboratory data of and antibiotic use in subjects with culture-proven childhood salmonellosis, who were treated at the Chonbuk National University Hospital between September 1998 and August 2008, were analyzed retrospectively. Patients with underlying diseases or concomitant illnesses were excluded. Results : We assessed a total of 72 patients. There were 68 stool culture-positive cases, 7 blood culture-positive cases, and 3 both stool culture- and blood culture-positive cases. Salmonella group D was the most frequent pathogen in stool (63.9%) and blood (71.4%) cultures. Salmonella typhi was isolated in 1 case. Of the 72 patients, 45 (62.5%) were male children, of which 29 (40.3%) were aged <3 years. The patients most commonly presented with diarrhea (90.2%) and fever (83.3%). Leukocytosis (leukocyte count, >$15,000/{\mu}L$) and leukopenia (leukocyte count, <$4,000/{\mu}L$) were detected in 8.3% and 5.6% of the patients, respectively. Elevated serum C-reactive protein concentration (>5 mg/dL) and erythrocyte sedimentation rate (>20 mm/h) were observed in 88.9% and 58.3% of the patients, respectively. Fifty-two (85.2%) of 61 patients who had undergone antibiotic treatment received a third-generation cephalosporin as definitive antibiotic therapy. Multidrug resistance rate was 40.0 % in the first 5 years of the study and 71.4% in the last 5 years. No fatalities occurred in this series. Conclusion : Children with culture-proven salmonellosis showed relatively benign clinical outcomes. Appropriate antibiotic treatment of <2 weeks is probably adequate for those without a suppurative focus of infection. The incidence of antibiotic resistant isolates was recently seen to increase.

• 대한공업교육학회지
• /
• v.37 no.1
• /
• pp.145-164
• /
• 2012

The purpose of this study is to develope the teaching materials of career education for the 'Information and Communication Technology and Our Life' unit in the technology education. As preparation phase, in order to choose the suitable contents for career education, we analyzed the technology education curriculum and 'Information and Communication Technology and our Life' unit of technology and home economics. And then we compared and analyzed the existing related researches. After content analysis of the teaching materials for career education, we mapped the contents into career education area. In the 'Design' step of teaching, we extracted the unit design components after analyzing 'Development in Information and Communication Technology' unit of eleven text books used in 2007 revised curriculum In the 'Introduction', 'Activity', 'Arrangement' steps of teaching, by applying the SHIP model, one of career education program model, we develop the teaching materials. Then, we get expert evaluation using questionnaire and improve the suitability of the teaching materials. The results are as followings: First, our teaching materials reflect the development history of information and communication technology well, show the features of career education, and are suitable to middle school students as the teaching materials. Second, our teaching materials can help students to face various jobs related with the development of Information and communication technology, to have more interests and exploring opportunities about 'Information and Communication Technology' subject. Third, our teaching materials can help teachers to use it for the career education of 'Information and Communication Technology and our Life' unit of 2007 revised curriculum in the class time. Our teaching materials can also be used in the extra activity related to career education and the Creative Experience Activities. Furthermore, since 2009 revised curriculum includes the career education unit in the 'Information and Communication Technology' subject, our teaching materials can be used partially as the teaching materials in the future.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.1
• /
• pp.33-39
• /
• 2010

Purpose: It is very important to confirm conformance of dose distribution that is formed with treatment planning from IMRS or IMRT. It has been a problem dropped accuracy and conformance when the field size is getting smaller because of character of the 2D ion chamber. Verification of MatriXX Phantom dose distribution with a change in the SAD. Dose distribution measurement and analysis to improve the accuracy and should be useful to evaluate the award. Materials and Methods: A use of Novalis linear accelerator 6 MV photon beams. In general, IMRS were 25 patients with small field size. The selected patients were divided into three groups on the basis of the field size. SAD was changed from 80 to 130 cm and field size to determine the dose distribution to the change, each dose was measured using MatriXX Phantom. Analysis of measured values obtained from the program for each patient through the treatment planning system comparison and analysis of the dose distribution and gamma values were expressed. Result: SAD 80, 100, and 120 cm in size in the gamma value to the investigation of patients less than $3\;cm^2$ average 0.939, 0.969, and 0.979, respectively. Patients with more than $5\;cm^2$ 0.962, 0.983, and 0.988, respectively. $5\;cm^2$ or more patients 0.982, 0.990, and 0.992, respectively. Conclusion: The error rate of less than $3\;cm^2$ field size is increased rapidly. If the field size is increased, resolution is increased by 2D ion chambers. It has been approved that it can be credible if it is around $3\;cm^2$ when measuring dose distribution using MatriXX. Adjusting geometric field size by changing SAD is likely to be very useful when you measure dose distribution using MatriXX.

• Korean Journal of Cognitive Science
• /
• v.27 no.1
• /
• pp.1-25
• /
• 2016

The present study investigated the effect size of attention and consciousness on change detection. We confirmed the effect size of consciousness by comparing the condition which combined attention and consciousness and the condition of attention without consciousness. Then, we confirmed the effect size of attention by comparing the condition of attention without consciousness and the control condition which excluded attention and consciousness. For this purpose, change detection task and continuous flash suppression (CFS) were used. CFS renders a highly visible image invisible. In CFS, one eye is presented with a static stimulus, while the other eye is presented with a series of rapidly changing stimuli, such as mondrian patterns. The result is that the static stimulus becomes suppressed from conscious awareness by the stimuli presented in the other eye. We used a customized device with smartphone and google cardboard instead of stereoscope to trigger CFS. In Experiment 1-1, we reenacted some study to validate our experimental setup. Our experimental setup produced the duration of stimulus suppression that were similar to those of preceding research. In Experiment 1-2, we reenacted a study for attention without consciousness using an customized device. The results showed that attention without consciousness more strongly work as a cue. We think that it is reasonable to use CFS treatment employing smartphone and google cardboard for a follow-up study. In Experiment 2, when performing the change detection task, we measured the effect size of consciousness and attention by manipulating the consciousness level of cue. We used the method in which everything but the variable of interest kept being fixed. That way, the difference this independent variable makes to the action of the entire system can be isolated. We found that there was significant difference of correct response rate on change detection performance among different consciousness level of cue. In this study, we investigated that not only the role of attention and consciousness were different also we were able to estimated the effect size.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.390-399
• /
• 2015

This study was conducted to examine the potential use of coffee waste (CW) as an adsorbent of HCHO by adding into fiberboard. For the purpose, CW treated with various temperatures and times was placed in desiccator with a HCHO solution and then the HCHO adsorptivity of the CW was measured by acetylacetone (ATAN) and DNPH methods. In the results of ATAN analysis, amount of HCHO adsorbed in distilled water was the lowest on the non-treated CW and steadily increased to $100^{\circ}C$-treated temperature. However, over the $100^{\circ}C$, heating temperature (H-Temp) had not an effect on the HCHO adsorptivity of CW. Amount of HCHO adsorbed on CW itself was the highest at $100^{\circ}C$ H-Temp, following by $50^{\circ}C$, $150^{\circ}C$, $0^{\circ}C$, $250^{\circ}C$ and $200^{\circ}C$. For the HCHO adsorptivity of CW measured by DNPH methods, HCHO was not detected in the distilled water stirred with non-treated CW, but detected from the distilled water stirred with heating-treated CW. The content was the highest in the CW heating-treated at $100^{\circ}C$ for 10 min. In addition, HCHO adsorbed on CW itself increased to the H-Temp of $100^{\circ}C$ regardless of heating time, but decreased or reduced greatly degree of the increase over $100^{\circ}C$ H-Temp. In conclusion, optimal heating conditions of CW for the HCHO adsorption might be H-Temp between 100 and $150^{\circ}C$ with 10 min according as technical and economical reasons. Heating-treated CW manufactured with above the conditions can be used as an adsorbent in conventional fiberboard production for reducing HCHO emssion.