• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.954-955
• /
• 2005

• The monthly packaging world
• /
• s.330
• /
• pp.112-114
• /
• 2020

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.43-45
• /
• 2004

Brazing between cemented carbides and steel for tool investigated by copper alloy brazing filler. Copper alloy filler was high liquidus temperature($990^{\circ}C$), therefor the shank(steel) occurred softening. Because brazing sample was necessary to heat treatment after brazing process. This experiment, influence of austenite time and purge temperature on heat treatment were investigated. As a result, these treatments obtained to high deflective strength In case of austenite time was short and purge temperature was low. Especially, nitride precipitated brazing layers was strongly influenced by the deflective strength.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1401-1405
• /
• 2010

We have successfully demonstrated of metal-insulator-semiconductor (MIS) capacitors with $HfO_2$/p-Si structures. The $HfO_2$ film was grown at $200^{\circ}C$ on H-terminated Si wafer by atomic layer deposition (ALD) system. TEMAHf and $H_2O$ were used as the hafnium and oxygen sources. A cycle of the deposition process consisted of 0.1 s of TEMAHf pulse, 10 s of $N_2$ purge, 0.1 s of $H_2O$ pulse, and 60 s of $N_2$ purge. The 5 nm thick $HfO_2$ layer prepared on Si substrate by ALD exhibited excellent electrical properties, including low leakage currents, no mobile charges, and a good interface with Si.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2420-2424
• /
• 2009

We have successfully demonstrated of metal-insulator-semiconductor (MIS) capacitors with $Al_2O_3/p-Si$ structures. The $Al_2O_3$ film was grown at $200^{\circ}C$ on H-terminated Si wafer by atomic layer deposition (ALD) system. Trimethylaluminum [$Al(CH_3)_3$, TMA] and $H_2O$ were used as the aluminum and oxygen sources. A cycle of the deposition process consisted of 0.1 s of TMA pulse, 10 s of $N_2$ purge, 0.1 s of $H_2O$ pulse, and 60 s of $N_2$ purge. The 5 nm thick $Al_2O_3$ layer prepared on Si substrate by ALD exhibited excellent electrical properties, including low leakage currents, no mobile charges, and a good interface with Si.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.73-79
• /
• 2000

본 논문은 BCPS(Balanced canister purge solenoid valve) 의 Lab. 내구 시험 Spec. 결정 방법에 관한 것이다. BCPS 는 기존에 사용 중인 CPS(Canister purge solenoid valve) 의 응답성과 제어의 용이성을 좋게 하여 배기 가스 특성을 향상시키기 위해 CPS 내부에 Rubber 재질의 막(Diaphragm) 을 적용한 것이다. 하지만 이 Diaphragm 이 마모 등에 의해서 찢어지면, 오히려 배기 특성이 저하된다. 따라서 BCPS의 적용을 위해서는 이 Diaphragm 의 내구성이 검증되어야 하며, 이를 위해서는 새로운 신뢰성 시험 Spec. 의 개발이 필요하다. 본 연구에서는 BCPS Diaphragm의 검증을 위해 필요한 신뢰성 시험 Spec. 을 결정하였다. 이를 위해, X-ray Inspection System등을 이용하여 부압에 따른 Diaphragm 의 형상 변화 등을 관찰하였으며, 실제 차량에서 Diaphragm 에 걸리는 압력의 분포를 측정하였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.59-63
• /
• 2003

체적 음향파 공진기(Film bulk acoustic resonator, FBAR)는 2~10 Ghz 대역의 차세대 이동 통신용 구현에 필수적인 부품이기 때문에 국내외에서 활발한 연구가 진행되고 있다. 본 논문에서는 FBAR 소자 제조를 위한 연구에서 원자층 증착(Atomic layer deposition, ALD) 방법에 의한 ZnO buffer layer 위에 스퍼터링 방법을 이용한 2-step 방법을 사용하여 제조하였다. ALD를 이용한 ZnO buffer layer는 diethylzinc(DEZn)/$H_2O$를 순차적으로 주입하여 증착하였다. 이 때 두 원료물질 사이에 고순도 Ar 가스를 purge gas로 사용하였다. 원료의 주입시간은 1초, 원료간 purge 시간은 23 초로 하고 증착하였다. 2-step 방법을 이용할 경우, 스퍼터링 방법만을 이용하였을 때 보다 우수한 c-축 배향성 및 박막의 표면형상이 관찰되었다. 2-step 방법을 FBAR 소자 제작에 적용할 경우 보다 우수한 특성의 공진기를 제작할 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1112-1114
• /
• 2017

The liquid rocket engine determines the routing of the component placement and layout by adapted the cycle method, the hardware configuration, the gimbal type on the functional implementation, and so on. In this paper, the conceptual routing of major pneumatic lines such as helium (He) supply pneumatic line for driving, many purge pneumatic line and main ignition line based on the main components installed in the liquid rocket engine was performed.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.47-53
• /
• 2008

The objective of this paper is to clarify the flow characteristic, velocity distribution, pressure loss, and other such fundamental data for the canister during loading and purging. The amount of gas that is loaded increases as the loading rate is decreased and the time increased, and the purging improves as the purge rate is increased. The hydrocarbons that are purged initially have a high concentration, and a large amount is purged. During loading and purging, the temperature initially increases and decreases drastically due to heat generation and heat loss.

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.337-339
• /
• 2002

ㆍ시스템 구축 ㆍNetwork보안 ㆍ서버사양 ㆍApplication 구축 ㆍMaster Data ㆍLegacy System과 Interface ㆍReport(보고서 지원) ㆍOn-Going Support ㆍNew Process지원 ㆍProcess Remodeling ㆍ정기적인 Data Purge ㆍReport(보고서)(중략)