• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.296-301
• /
• 2009

An inductively coupled plasma assisted atomic layer deposition(ICP-ALD) system has been constructed for the deposition of ZnO thin films, and various experiments of ZnO thin films on p-type Si(100) substrates have been carried out to find the self-limiting reaction conditions for the ICP-ALD system under non-plasma circumstances. Diethyl zinc[$Zn(C_2H_5)_2$, DEZn] was used as the zinc precursor, $H_2O$ as the oxidant, and Ar as the carrier and purge gas. At the substrate temperature of $150^{\circ}C$, atomic layer deposition conditions based on self-limiting surface reaction were successfully obtained by series of experiments through the variation of exposure times for DEZn, $H_2O$, and Ar. ZnO deposition was repeated at different substrate temperatures of $90{\sim}210^{\circ}C$. As a result, the thermal process window(ALD window) for ZnO thin films was observed to be $110{\sim}190^{\circ}C$ and the average growth rate was measured to be constant of 0.29 nm/cycle. Properties of the film's microstructure and composition(Zn, O, etc.) were also studied. As the substrate temperature increases, the crystallinity was improved and ZnO(002) peak became dominant. The films deposited at all temperatures were high purity, and the films deposited at high temperatures had the composition ratio between Zn and O closer to one of a stable hexagonal wurtzite structure.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.4
• /
• pp.412-419
• /
• 2004

In odor to select optimum extraction methods of volatile compounds in beef extract powder(BEP) as basic data for the development of a new detection method of irradiated BEP, four extraction methods, such as solid phase microextraction with polar fiber(S-PD) and non-polar fiber(S-CD), purge and trap(P&T) and liquid liquid continuous extraction(LLCE) methods, were tested with gas chromatography/mass spectrometry method. A total of 106 volatile compounds including 22 hydrocarbons, 7 aldehydes, 6 ketones, 13 alcohols, 6 sulfur-containing compounds, 19 nitrogen-containing compounds, 6 aromatic compounds, 17 terpenes, 8 furans and 2 miscellaneous compounds were detected in BEP by four detection methods. The most compounds(62 compounds) were detected by S-PD method, followed by P&T(43), LLCE(38) and S-CD method(30). Among these methods, S-PD and P&T methods showed a complementary interrelationship to detect volatile compounds as S-PD method showed high detectabiltiy to all compound groups except hydrocarbons and ketones, which had high volatility and low molecular weight(less than RI 1200), but P&T method showed the contrary pattern to that of S-PD method. Moreover, the most of volatile compounds detected by S-CD and LLCE methods were also detectable by S-PD or/and P&T methods. Therefore, the simultaneous application of S-PD and P&T methods were selected as the optimum volatile extraction methods of BEP.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.469-474
• /
• 2007

The aim of this study was to investigate the quality changes in Supraspinatus muscle of Hanwoo with different packaging methods, such as wrapped packaging (C), vacuum packaging (V) and modified atmosphere packaging (MA). These samples were stored for 25 days under $5^{\circ}C$. Each sample was evaluated for pH, volatile basic mitrogen (VBN) value, purge loss, hardness, meat color and microbial counts. From the results obtained, no significant differences were observed among treatments at the pH. The VBN values of MA were significantly lower than those of C. Also, MA was enhanced stability of meat color compared with other packaging methods during storage days. The purge loss was the most in the V samples, followed by the C and the MA was the lowest. Total bacteria counts of MA sample were significantly lower than those from C. Therefore, it has been concluded that MA could be used as an effective packaging since it extends the shelf life and improve the quality of Hanwoo supraspinatus m.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.80-85
• /
• 2018

Usable capacity is one of the most important parameters for evaluating the performance of an adsorbent for $CO_2$ capture from flue gas streams. In the pressure swing adsorption (PSA) process, the usable capacity is calculated as the difference between the quantity adsorbed in flue gas at high pressure (ca. 20 bar) and the quantity adsorbed at lower purge pressure (ca. 2 bar). In this paper, two stereo-types of metal-organic framework (MOF) were evaluated as an promising adsorbent for $CO_2$ capture: flexible structured MOF (MIL-53) and MOF possessing strong binding sites (MOF-74). The results showed that a total $CO_2$ capture capacity is strongly related to the specific surface area and heat of adsorption, revealing high uptake in MOF-74. However, the usable capacity was more pronounced in MIL-53 due to a structural transition.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.816-832
• /
• 2022

To evaluate the effects of early postmortem vacuum packaging (VP) on meat quality during postmortem chilled storage, hot-boned lamb was vacuum-packaged at 1, 6, 12, 24, and 48 h postmortem and stored around 2℃ until 168 h postmortem, with lamb packaged in plastic wrap as the control (aerobic packaging). Intramuscular pH decline was delayed when lamb was vacuum packaged at 1, 6, and 12 h postmortem (p<0.05). The lamb vacuum-packaged at 1 h postmortem (VP-1h group) had significantly lower shear force values and purge losses accompanied by lower free thiol group values than other treatments during postmortem storage and was also higher in extractable calpain-1 activity by 6 h postmortem (p<0.05). Free thiol group concentrations were significantly higher after VP at 6 and 12 h postmortem (p<0.05). Packaging lamb under vacuum very early postmortem produced the lowest shear force and purge loss, likely by slowing heat loss and muscle temperature decline, implying that lamb quality is improved by VP when applied very early postmortem. This was at the expense of protein oxidation, which was unrelated to other meat quality measurements, most likely because potential contracture during hot boning confounded its impact. Further research is required to understand the implications of the interaction between protein oxidation, VP, and hot boning on the acceptability of lamb.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.44-50
• /
• 2009

In this study, the use of purge & trap GC-MS technique for determination of methylmercury in sediment samples was described. The method detection limit of the method was determined as 0.06 ng/g and the recovery of the method was $102{\pm}11.4%$, with precisions better than 11.2%. The method was validated by analysis of CRMs such as ERM CC580 (estuarine sediment) and IAEA 405 (sediment). Additionally, the performance of the method was tested on river sediment samples and the analytical results were compared with those of the GC-CVAFS, which has been widely used for methylmercury analysis.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.106-113
• /
• 2024

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li₄SiO₄ pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li₄SiO₄ made by melt spraying method at 467 ℃ is approximately 23.34 h. High-density Li₄SiO₄ pebbles exhibit tritium release at relatively low temperatures (<600 ℃) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ℃ and 550 ℃ is 1.19 × 10^-11 cm²/s and 5.34 × 10^-11 cm²/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

• Fisheries and Aquatic Sciences
• /
• v.4 no.4
• /
• pp.229-237
• /
• 2001

In order to identify of volatile flavor compounds and polycyclic aromatic hydrocarbons (PAHs) in commercial liquid smokes, this study was conducted to analyze volatile flavor compounds by solvent extraction and/or Purge & Trap method/GC/MSD. A total of 156 volatile flavor compounds were detected in 6 commercial liquid smokes, and these compounds were composed mainly of 12 aldehydes, 60 ketones, 7 alcohols, 14 acids, 20 esters, 24 aromatic compounds, 7 furans and 12 miscellaneous compounds. Ketones $(806.6-7,573.9\mu g/mL)$ and aromatic compounds $(282.6-7,896.3 \mu g/mL)$ were more abundant than others. The PAHs known as carcinogen have not been detected in this study. The acids $(422.9-4,903.1\mu g/mL)$ was identified in relatively high concentration compared to other groups. Phenol and its derivatives among aromatic compounds were in relatively high concentration. Especially, the phenol and its derivatives including o-cresol, guaiacol, 4-ethylguaiacol and syringol were in higher concentration.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.103-107
• /
• 1999

Even if odorous compounds remain very low concentration in water, it cause strong odor. Because Geosmin and most of odorous compound had very low vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and the optimum extraction solvent is MTBE. Other extraction solvents' efficiency is in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency is 5 g in liquid-liquid extraction method. The shaking time(0~24hr) has no concern with adsorption efficiency. The optimum adsorbent is XAD-2 resin and extraction solvent is MTBE. Dosing NaCl, adsorption efficiency is increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this algae toxins(Mycrocystin, Anatoxin etc.).

• ETRI Journal
• /
• v.34 no.6
• /
• pp.816-826
• /
• 2012

Self-healing Ethernet rings show promise for realizing the SONET/SDH-grade resilience in Carrier Ethernet infrastructures. However, when a ring is faulty, high-priority protection messages are processed in less time than low-priority data frames are processed. In this situation, any delayed data frames either being queued or traveling through long ring spans will cause the ring nodes to generate incorrect forwarding information. As a result, the data frames spread in the wrong direction, causing the ring to become unstable. To solve this problem, we propose four schemes, that is, dual flush, flush delay timer setting, purge triggering, and priority setting, and evaluate their protection performance under various traffic conditions on a ring based on the Ethernet ring protection (ERP) method. In addition, we develop an absorbing Markov chain model of the ERP protocol to observe how traffic congestion can impact the protection performance of the proposed priority setting scheme. Based on our observations, we propose a more reliable priority setting scheme, which guarantees faultless protection, even in a congested ring.