• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.182-186
• /
• 2008

The prism spectrometer is a standard device for the measurement of refractive index; it is used in undergraduate laboratories. Typically, however, lots of attention is required in the alignment, and the accuracy of the obtained refractive index is not so high in spite of the durability of the device. The maximum and minimum deviation method, which compensates the disadvantages of the prism spectrometer, can be composed cost effectively using a length marking tape and a rotating platform. It can measure the refractive indices accurately by utilizing a wide screen. In this study, the equal sided hollow prism whose length is 26 mm was fabricated and measured the refractive indices of seven kind of liquids (pure water, $C_3H_5(OH)_2$, $CCl_4$, $C_6H_4NH_2$, $CS_2$, $C_6H_4(CH_3)_2)$ by using the prism spectrometer and maximum and minimum deviated laser beam method at the wavelengths of He-Ne laser (${\lambda}$= 632.8 nm) and YVO4 laser (${\lambda}$= 532 nm). The result shows that the data obtained by the latter method are more accurate and precise than those obtained by the former device.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2006

Porous chitosan and chitin membranes were prepared by using silica particles as porogen. Membrane preparation was achieved via the following three steps: (1) chitosan film formation by casting an chitosan solution containing silica particles, (2) preparation of porous chitosan membrane by dissolving the silica particles by immersing the film into an alkaline solution and (3) preparation of porous chitin membrane by acetylation of chitosan membrane with acetic anhydride. The optimum preparation conditions which could provide a chitosan and chitin membranes with good mechanical strength and adequate pure water flux were determined. To allow protein affinity, a reactive dye (Cibacron Blue 3GA) was immobilized on porous chitosan membrane. Binding capacities of affinity chitosan and chitin membranes for protein and enzyme were determined by the batch adsorption experiments of BSA protein and lysozyme enzyme. The maximum binding capacity of affinity chitosan membrane for BSA protein is about 22 mg/mL, and that of affinity chitin membrane for lysozyme enzyme is about 26 mg/mL. Those binding capacities are about $several{\sim}several$ tens times larger than those of chitosan and chitin-based hydrogel beads. Those results suggest that the porous chitosan and chitin membranes are suitable in affinity filtration chromatography for large scale separation of proteins.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.714-720
• /
• 2010

This study was carried out to investigate the effects of Hericium erinaceum (HE) powder and extract on the quality characteristics of noodles. The water binding capacity of the HE powder was higher than that of pure wheat flour. Gelatinization temperature of HE powder-wheat flours gradually were increased and initial viscosity at $95^{\circ}C$, viscosity at $95^{\circ}C$ after 15 min and maximum viscosity of those composites were decreased, as measured by a amylograph. The noodles showed decreased L values and increased a and b values with increasing HE powder in the wheat flour composite. The mechanical properties of the control cooked noodles showed the highest hardness, which decreased with the addition of HE powder. Springiness, cohesiveness, and gumminess decreased with increasing amounts of added HE powder. While the higher adhesiveness of noodles increased with more preferred than the control, and considerably the greatest overall acceptability of noodles was for those containing 2% HE powder.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.51-58
• /
• 2017

The present study to develop a process for extracting nitric acid and gold from aqua regia leach solution using TBP(tributyl phosphate) was conducted. The pure aqua regia was used to investigate the extractive behavior of nitric acid depending on the concentration of extractant, concentration ratio of nitric and hydrochloric acid. The extraction rate of nitric acid and gold from the gold bearing aqua regia was also examined. The theoretical extraction number was verified by counter current using the number of operations and the phase ratio obtained from McCabe-Thiele diagram. Stripping experiments were carried out for continuous recovery of nitric acid and gold in loaded organic. Considering the effect of extraction acid and gold, the simulation showed that greater than 99.9% extraction of $103.0mg{\cdot}L^{-1}$ gold and 98.0% of $151.2g{\cdot}L^{-1}$ nitric acid could be attained in a two and three-stage counter-current extraction at an O/A phase ratio of 1:0.85. Distilled water and sodium thiosulfate were used as the nitric acid and gold stripping solution. The stripping rates were 99.5% and 92.0%, respectively. The study revealed that the recovery of nitric acid and gold from gold bearing aqua regia was a plausible approach through simultaneous extraction and continuous stripping of nitric acid and gold.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.544-554
• /
• 1995

Pool boiling of dilute aqueous solutions of polyethylene oxide polymer has been experimentally investigated for the purpose of understanding the physical mechanisms of the suppression of vapor explosions in this polymer solution. Tn solid spheres of 22.2mm and 9.5mm-diameter ore heat-ed and quenched in the polymer solutions of various concentrations at 3$0^{\circ}C$. The results showed that minimum film boiling temperature($\Delta$ $T_{MFB}$) in this highly-subcooled liquid rapidly decreased from over $700^{\circ}C$ for pure water to about 15$0^{\circ}C$ as the polymer concentration was increased up to 300ppm for 22.2mm sphere, and it decreased to 35$0^{\circ}C$ for 9.5mm sphere. This large decrease of minimum film boiling temperature in this aqueous polymer solution may explain its ability to suppress spontaneous vapor explosions. Also, tests with applying a pressure wave showed that the vapor film behaved more stable against an external disturbance at higher polymer concentrations. These observations together with the experimental evidences of vapor explosion suppression in dilute polymer solutions suggest that the application of polymeric additives such as polyethylene oxide as low as 300ppm to reactor emergency coolant be considered to prevent or mitigate energetic fuel-coolant interactions during severe reactor accidents.s.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.23-32
• /
• 2004

Metals, ceramics and polymers are widely used as bioimplant materials. However, Ti and Ti alloys are widely used because of its high strength to weight ratio and good biocompatibility when implanted in the body. In this experiment, Ti alloys of Grade-4 (gr4), 0.2 wt % Fe, 0.5 wt % Fe and 2 wt % Fe were studied for their surface morphology and HAp forming ability on the metal substrate for different treatments. Intially, the samples were mechanically polished on silicone carbide paper (No.-2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM. The SEM studies showed network of pores in all samples. These samples were immersed in stimulated body fluids (SBF) kept at $36.5^{\circ}C$ for different periods over the length of 1 to 14 days. The apatite formation was confirmed on all Ti-alloys using EDAX.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.129-133
• /
• 2006

A bacterial disease of small red bean (Phaseolus angularis) was observed on field-grown plants in Suwon in year 2003. Leaf symptoms initially appeared as water-soaked spots that gradually enlarged, became flaccid and necrotic and were often bordered by a small zone of lemon yellow tissue. In the case of severe infection, dead leaves were defoliated. Pod symptoms consisted of the lesions that were generally circular, slightly sunken and dark reddish brown. Isolation made from diseased leaves on yeast extract dextrose calcium carbonate agar yielded nearly pure cultures of a yellow-pigmented bacterium typical of a xanthomonad. Three bacterial strains were purified and used for further tests. Pathogenicity of strains was confirmed on 3-week-old small red bean plants sprayed with bacterial suspensions containing $10^8 cfu/ml$ of phosphate buffered saline. The representative Xanthomonas strains isolated from small red bean were compared with X. axonopodis pv. phaseoli and X. axonopodis pv. phaseoli var. fuscans type strains for fatty acid profiles, biochemical tests and metabolic fingerprints using Biolog GN2 microplate, showing that all outcomes were indistinguishable between our isolates and reference strains. Two of three strains produced a melanin-like brown pigment extracellularly on King's medium B agar. These results suggest that this new small red bean disease observed in Suwon is bacterial fuscous blight caused by X. axonopodis pv. phaseoli and X. axonopodis pv. phaseoli var. fuscans.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.769-777
• /
• 2004

A Helicobacter pylori urease inhibitor from Rubus coreanus Miquel has been isolated and partially characterized for aiming to Prevent H. pylori growth and decrease harmful accumulation of ammonia in human gastric mucosa. We screened urease inhibitory activities in 519 extracts library prepared by solvent extraction from 173 kinds of edible plants, medicinal herbs, herbs and seaweeds using a colorimetric urease assay system. As results of primary and secondary screening, 70% acetone extract of Rubus coreanus Miquel was selected as potent candidate, showing about 24% inhibitory activity. The acetone extract was sequentially partitioned into RCE/RCWI and RCB/RCW2 layers with ethyl acetate and butanol. The major active component in RCW2, water layer from butanol fractionation was revealed to be peptidic or proteinous substance by inhibitory activity determination after pronase digestion and periodate oxidation. RCW2-IIIc a was isolated by sequential column chromatography on DEAE-Toyopearl 650C, Butrl-Toyopearl 650M and Sephadex LH-20. The isolated urease inhibitor RCW2-IIIc $\alpha$, was highly pure proteinous substance with molecular weight of 13kDa by high-performance gel permeation liquid chromatography. RCW2-IIIc$\alpha$ has about 5 times higher inhibitory activity than 70％ acetone extract, showing high stability against heat treatment and peptic digestion.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.566-575
• /
• 2013

The fruits of Taxus cuspidata were collected, divided into seeds and fruits, and extracted with 95% EtOH. The extracts were evaporated under the reduced vacuum pressure, concentrated, then successively fractionated with a series of n-hexane, dichloromethane, ethyl acetate and water on a separatory funnel to get some freeze dried samples. A portion of the EtOAc (arils:1.65 g, seeds:1.04 g) and $H_2O$ (arils:7 g, seeds:10 g) soluble samples were chromatographed on a Sephadex column using MeOH-$H_2O$ (1:1, 1:3, 1:5, v/v), EtOH-hexane (3:1, v/v) mixture and 100% $H_2O$ as eluting solvents to isolate pure compounds from the fractions. The isolates were developed by cellulose TLC using t-BuOH-HOAc-$H_2O$ (TBA; 3:1:1, v/v/v) and 6% aqueous HOAc. Visualization was done under ultraviolet light and by spraying the vanillin-HCl-EtOH reagent (4.8:12:480, v/v/v). followed by heating. The structures of the isolates were characterized by $^1H$- and $^{13}C$-NMR, DEPT, 2D-NMR, LC/MS and EI-MS spectra. In addition to the NMR and MS spectra, acid hydrolysis and permethylation were used to determine the correct structure of the isolated sugar compound. Their structures were elucidated as (+)-catechin (1), (-)-epicatechin (2), (+)-gallocatechin (3), (-)-epigallocatechin (4) and ${\beta}$-D-fructofuranose-($2{\rightarrow}4$)-O-${\beta}$-D-glucopyranose($1{\rightarrow}4$)-O-${\alpha}$-D-glucopyranose ($1{\rightarrow}2$)-O-${\beta}$-D-fructofuranose (5) on the basis of the above experimental evidences.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.3
• /
• pp.5-16
• /
• 2021

In this study, the applicability of the MBR(Membrane Bio Reactor) process of oxygen dissolve was evaluated through comparison and evaluation of the efficiency of oxygen dissolve device and conventional aeration device in the explosive tank within the MBR process. The organic matter and ammonia oxidation by oxygen dissolve device were evaluated, and the efficiency of persaturation was evaluated by applying real waste water (anaerobic digester effluent treatement from food waste). SCOD and ammonia removal rates for oxygen dissolve device and conventional aeration device methods were similar. However, it was determined that the excess sludge treatment cost could be reduced as the yield of microorganisms by oxygen dissolve device is about 0.03 g MLSS-produced/g SCOD-removed lower than that of microorganisms by conventional aeration device. The removal rates of high concentrations of organic matter (4,000 mg/L) and ammonia (1,400 mg/L) in anaerobic digester effluent treatment from food waste were compared to the conventional aeration device and the oxygen dissolve device organic matter removal rate was approximately 13% higher than that of the conventional aeration device. In addition, for MLSS, the conventional aeration device was 0.3 times higher than for oxygen dissolve device. This is believed to be due to the high progress of sludge autooxidation because the dissolved oxygen is sufficiently maintained and supplied in the explosive tank for oxygen dissolve device. Therefore, it was determined that the use of oxygen dissolve device will be more economical than conventional aeration device as a way to treat wastewater containing high concentrations of organic matter.