• Current Photovoltaic Research
• /
• 제5권4호
• /
• pp.140-144
• /
• 2017

$CuSbS_2$ (CAS) and $CuSbSe_2$ (CASe) nanocrystals (NCs), which consist of earth-abundant elements, were synthesized by a mechanochemical method. Elemental precursors such as copper, antimony, sulfur, and selenium were used without adding any organic solvents or additives. The NCs were synthesized by milling for a few hours. The sudden phase changes occurred by self-ignition and propagation, as previously observed in other mechanochemical synthetic processes. The XRD, Raman, and TEM analysis were carried out to determine the crystallinity and secondary phase of the as-synthesized CAS and CASe NCs, confirming the phase-pure synthesis of CAS and CASe. Optical properties were investigated by UV-Vis spectroscopy and it was observed that the band gap energies were about 1.1 and 1.5 eV, respectively for CAS and CASe, suggesting the potential for the use as solar cell materials. The NC colloids dispersed in anhydrous ethanol were prepared and coated on Mo substrates by a facile doctor-blade method. The investigation on the solar cell properties of the as-synthesized materials is underway.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.140-150
• /
• 1996

CFC-12, which has been used most widely in automobile air conditioners and household refrigerators is scheduled to be phased out soon because of its high ozone depletion potential. Now HFC-134a is suggested as an alternative refrigerant for CFC-12. In this Study, we intended to investigate how PAG oil influence evaporation heat transfer and flow pattern, using R-134a and PAG oil influences evaporation heat transfer and flow pattern, using R-134a and PAG oil in the horizontal miro-fin evaporation tube. Experiments were conducted under the flowing est conditions : mass velocity 86-250kg/$m^2$s, heat flux 5-30 ㎾/$m^2$, oil concentration 0-21 wt.% and saturation temperature 5$^{\circ}C$. Local evaporation heat transfer coefficients were found to be higher at the top, side and bottom of the tube in this order. Average heat transfer coefficients turned out to increase with oil concentration increment up to 3 wt.% oil concentration, whereas heat transfer coefficients gradually decreased over 3 wt.% oil concentration, because of oil-rich liquid film was formed on the heat transfer surface. Flow patterns were rapidly transitioned to annular regimes up to 3 wt.% oil concentration. In case of pure refrigerant, measured heat transfer coefficients in the experiments were similar to those of Kandlikar＇s correlation.

• 대한인간공학회지
• /
• 제25권4호
• /
• pp.9-22
• /
• 2006

1/f fluctuation characteristics can be seen in various natural phenomena, such as breezes, streams, candle flames and the luminous patterns of fireflies. It is said that the 1/f fluctuation are comfortable for human beings. And they are introduced into many industrial products, such as an air conditioner, music, lighting, etc. This study focused on verifying the effects of 1/f fluctuation sound on comfort sensibility. Stimulus were divided into three groups(Group 1, 2, 3) by sound generation methodology. Fluctuation patterns of group 1, 2 were given by three types of fluctuation, 1/f0, 1/f1, 1/f2, and its of group 3 were given by two types of pure tone, 1/f1. In order to verify the effects, we measured the physiological responses of the subjects such as EEG(Electroencephalogram), ERP(Event-Related Potential), and these physiological responses were compared with subjective assessments, free answers. Consequently, we found that factor which had an effect on comfort sensibility was cognitive factor(for stimulus) rather than 1/f fluctuation sound pattern.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2771-2775
• /
• 2010

We present a rapid biogenic method for the production of nanoscale gold particles using pear extract. The formation and stability of pear-derived gold nanoparticles (Pear-AuNPs) were monitored by ultraviolet-visible spectroscopy. Their morphology, elemental composition and crystalline phase were determined by transmission electron microscopy, energy-dispersive X-ray spectroscopy and selected area electron diffraction. The average core size of crystalline Pear-AuNPs was in the range of $10{\pm}5\;nm$ and the observed morphology was spherical. The X-ray photoelectron spectrum showed a strong peak for the pure 'Au' phase. The circular dichroism spectrum indicated the natural capping ability of the pear extract, which generated peptide-gold nanoparticles. These nanoparticles were stable in aqueous solution for two months. A cell viability assay of Pear-AuNPs showed biocompatibility with human embryonic kidney 293 cells. Accordingly, this eco-friendly process for the bio-mimetic production of Pear-AuNPs is nontoxic in nature; consequently, it will find potential application in nano-biotechnology.

• 대한족부족관절학회지
• /
• 제23권4호
• /
• pp.201-207
• /
• 2019

An osteochondral fracture is considered to be an injury involving the cartilage and subchondral bone. Acute traumatic osteochondral fractures can be related to joint instability because abnormal joint motion causes shearing and rotatory stress. Acute osteochondral fractures are frequently missed or misdiagnosed as a pure soft tissue injury. Thus, surgeons' proactive attention is highly required as articular cartilage has limited potential for self-repair and these lesions may develop osteoarthritis. In order to minimize the progression of post-traumatic osteoarthritis, it is important to properly identify and treat osteochondral fractures. Yet, little is known about the operative management of acute osteochondral fractures of the talus. We report here on a case of a middle-aged male with acute osteochondral fractures of the bilateral lateral talar dome. We applied different operative methods on each side with regard to fragment size and stability. A favorable clinical outcome was obtained at 18 months follow-up.

• Geomechanics and Engineering
• /
• 제6권3호
• /
• pp.249-262
• /
• 2014

Tire chips and tire chips-soil mixtures can be used as alternative fill material in many civil engineering applications. In this study, the potential benefits of using tire chips as lightweight material to improve the bearing capacity and the settlement behavior of sand slope was investigated experimentally. For this aim, a series of direct shear and model loading tests were conducted. In direct shear tests, the effect of contents of the tire chips on the shear strength parameters of sand was investigated. Different mixing ratios of 0, 5, 10, 15 and 20% by volume were used and the optimum mixing ratio was obtained. Then, laboratory model tests were performed on a model strip footing on sand slope reinforced with randomly distributed tire chips. The loading tests were carried out on sand slope with relative density of 65% and the slope angle of $30^{\circ}C$. In the loading tests the percentage of tire chips to sand was taken as same as in direct shear tests. The results indicated that at the same loading level the settlement of strip footing on sand-tire chips mixture was about 30% less than in the case of pure sand. Addition of tire chips to sand increases BCR (bearing capacity ratio) from 1.17 to 1.88 with respect to tire chips content. The maximum BCR is attained at tire chips content of 10%.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1629-1639
• /
• 2016

This study is to estimate the production efficiency of abalone aquaculture and to find its determinants utilizing the survey data of operating expenses in 2015. The first part of the analysis applied both DEA and Super-DEA for the estimation of efficiency of each aquaculture household as DMU. We used wages, feeding costs and area as inputs and annual profits and sales as outputs of the model. The second part of the study applied both Tobit and OLS for the identification of determinants of the efficiency. We investigated cost-ratio, depreciation costs, careers, value of living seeds, cleaning costs of farming ground and a ratio of 1 and 2 year-old abalone at shipment as potential determinants. The estimation results show us that the average technical efficiency, pure technical efficiency, and scale efficiency score turn out to be 72%, 81% and 85% respectively. The Super-BCC and Super-CCR models reveal their average efficiency scores as 81% and 80%. All of the variables used to identify the determinants of the efficiency. The study results suggests that the production efficiency can be improved by cleaning farming ground and hence lowering the death rate of seeds.

• PNF and Movement
• /
• 제2권1호
• /
• pp.25-33
• /
• 2004

Purpose : The purpose of this article is to summarize the characteristics of isotonic combination. Method : Some studies of the motor unit activation patterns during isometric, concentric, and eccentric actions, neural strategies in the control of muscle force, and concentric versus combined concentric-eccentric training were reviewed. Results & Conclusions : Eccentric torque may be relatively higher than concentric torque for two potential reasons: 1) stretch responses in the antagonist are not elicited to restrain the motion as can occur concentrically and 2) stretch responses in the agonist may augment eccentric torque production. Concentric-eccentric training has a greater influence on functional capacity than that of concentric training. Both maximal force and average force throughout the motion were significantly higher when the dynamic action was started with preactivation as compared to the mode without preactivation. The peak torques observed during the concentric phase of the eccentric-concentric muscle actions were higher than those noted in the pure concentric contraction.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• The Korean Journal of Ecology
• /
• 제5권4호
• /
• pp.164-175
• /
• 1982

This paper contains the results obtained by the ecological investigation in Bijin island. The investigation was conducted during 3 dyas from Aug. 3 to Aug. 5, 1981. The results are followings. The tracheophyta of this island was recoreded as 64 families, 128 genera, 142 species, 21 varieties and 2 forma. Twenty eight species of ever-green broad-leaved trees comprising Gardenia jasminoides for. grandiflora, Castanopsis cuspidata var. thunbergii, Camellia japonica, etc. wad distributed in the southern area of the island. And there was the wind-break forest mainly consisting of aged Machilus thunbergii, Celtis sinensis and Zelkova serrata in the northern area. The northern area dominated by the second forest of Pinus thunbergii, where the whole residents lead their lives, shows the high population density and pure farming rate, so the natural degree is low. The other hand, there was the well-preserved forest of broad-leaved trees containing Zelkoba serrata. Acer palmatum and Quercus serrata, etc. in southern area having a steep peak, Seonyudai, and no resident. So, the potential vegetation of this island is assumed as the forest of ever-green broad-leaved trees which belongs to the forest of subtropics.