• 한국균학회지
• /
• 제49권3호
• /
• pp.295-302
• /
• 2021

표고 '화담'의 톱밥배지 안정생산을 위해 침공처리가 균사배양 및 자실체 생산성에 미치는 영향을 조사하였다. 종균 접종후 배지 온도는 배양 23일에 27.0-28.8℃, CO₂농도는 배양 16일에 14.0-15.6%까지 높아진 후 감소하였고, O₂농도는 CO₂농도와 반대의 경향이었다. 배양기간중 침공횟수가 많을수록 배지의 명도(L값)는 감소하고, 색차(∆E)와 중량감모율은 증가하였다. 침공처리에 따른 1주기 재배기간은 큰 차이를 보이지 않았지만, 침공처리 횟수가 늘어날수록 자실체 발이수가 증가하여 3회 침공처리구의 3주기 총수량이 605.7 g으로 가장 우수하였다.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1752-1758
• /
• 2008

This paper deals with the reduction of friction torque in permanent magnet motors by using the heat treatment of stator core. The stator core is made of electrical steel sheared by the punching die. From the punching process, large mechanical stress acting on the edge of stator tooth induces significant plastic and elastic deformation and then cause the change of magnetization properties. Then, the mechanical and magnetic unbalance in the sheared region of stator tooth produced by material cutting has influence on the friction torque. This paper investigated the effect of the punching process on the magnetization process and the mechanical deformation, and then proposed the stress relief annealing method for the reduction of friction torque among one of motor characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.695-696
• /
• 2008

This paper deals with the reduction of DC component of cogging toruqe by using the heat treatment of the stator core. The stator core is made of electrical steel sheared by the punching die. From the punching process, large mechanical stress at the edge of stator tooth induces significant plastic and elastic deformation and influences magnetic properties. Then, these phenomenon in the sheared region has influence on the magnetic unbalance in the air-gap of motor. This paper investigated the effect of the punching process on the magnetization process and the mechanical deformation and proposed the stress relief annealing method for the reduction of friction torque among one of motor characteristics.

• 대한치과교정학회지
• /
• 제38권3호
• /
• pp.159-174
• /
• 2008

치아이동 시 피질골 천공이 치조골 재형성에 미치는 영향을 알아보기 위해서 생후 15주된 자성백서를 사용하여 피질골 천공 후 치아이동을 실시한 실험군(Tooth movement with cortical punching: TMC group, n = 16)과 교정적 치아이동만 실시한 대조군(Tooth movement only group: TM group, n = 16)의 치아주위조직을 면역조직화학염색을 통하여 관찰하였다. 실험군과 대조군의 실험동물에 20 gm의 힘으로 상악 전치부 사이를 이개시키는 치아이동을 시행하였으며 실험군에서는 상악 전치부 구개부위에 피질골 천공을 실시하였다. 치아이동 후 1, 4, 7, 14일째에 실험군과 대조군의 실험동물을 희생시켰다. 면역조직화학염색법으로 OPG, RANK, RANKI의 발현을 비교한 결과, OPG의 발현은 양 군 모두에서 미처치 대조군에 비하여 감소되었으나, 실험군에서의 발현이 대조군보다 컸으며, RANK, RANKL은 피질골 천공을 시행한 경우에 더 강한 발현을 보이는 것이 관찰되었다. 따라서 피질골 천공이 치주조직의 OPG, RANK, RANKL의 발현에 영향을 미치며 치조골의 재형성을 향상시키는 것을 알 수 있었다.

• 한국버섯학회지
• /
• 제21권3호
• /
• pp.160-166
• /
• 2023

표고 신품종 '자담'의 자실체 안정생산을 위해 침공처리가 균사배양 및 자실체 생산성에 미치는 영향을 조사하였다. 침공 직경과 깊이가 크고, 침공수가 많을수록 중량감 모율과 색차는 증가하고 명도는 감소하였다. 종균 접종 후 배지온도는 배양 33일에, CO₂농도는 배양 19일에 최고치에 도달하였고, O₂농도는 CO₂ 와 반대의 경향으로 배양 14일에 최저치를 나타냈다. 침공 직경과 깊이가 크고 침공수가 많을수록 배지 품온과 O₂농도는 상승하였고, CO₂농도는 낮아졌다. 수량성은 5×70 mm-30 처리구에서 644.7 g으로 다른처리구에 비해 가장 높은 수량을 보여 자담의 적정한 침공방법으로 선발하였다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.10-16
• /
• 2013

Ultra-fine planing and micro punching are separately used for improving surface roughness and machining dot patterns, respectively, of metal molds. If these separate machining processes are applied for machining of identical molds, there could be an aligning mismatch between the machine tool and the mold. A hybrid machining system combining ultra-fine planing and micro punching was newly developed in this study in order to solve this mismatch; hybrid process technology was also developed for machining dot patterns on a mirror surface of a metal mold. The hybrid machining system has X, Y, and Z axes, and a cam axis for ultra-fine planing. The cam axis and attachable and removable solenoid actuators for micro punching can make large and small sizes of dot patterns, respectively. Ultra-fine planing was applied in the first place to improve the surface roughness of a metal mold; the measured surface roughness was about 20nm. Then, micro punching was applied to machine dot patterns on the same mold. It was possible to control the diameter of the dot patterns by changing the input voltage of the solenoid actuator. Before machining, severe inhomogeneous plastic deformation around the machined dot patterns was also removed by annealing heat treatment. Therefore, it was verified that metal molds with dots patterns for optical products can be machined using a hybrid machining system and the hybrid process technology developed in this study.

• 한국자원식물학회지
• /
• 제13권3호
• /
• pp.208-212
• /
• 2000

보온 피복재 종류가 자옥 포도 유목의 월동시 동해방지, 노동력 절감 및 병해 발생 억제에 미치는 영향을 구명하기 위하여 11월 하순에 짚을 덮은 다음 보온덮개B, 킬딩, 칼라부직A 및 백색니들펀칭부직포 등을 피복하여 시험한 결과를 요약하면 다음과 같다. 1. 보온력은 백색니들펀칭부직포가 가장 불량하였고, 다른 보온재간에는 차이가 미미하였다. 2. 발아는 보온덮개B에서 빨리 시작되었으며, 발아 9일 후에도 발아율이 79.7%로 타 보온재 보다 2.3∼12.5% 높았다. 3. 생육은 보온재간에 차이가 없었으며, 병해 발생은 킬딩과 보온덮개B에서 뿌리혹병이 지수 3.0∼3.2로 다소 많이 발생되었을 뿐 기타 병해는 처리간에 차이가 없거나 미미 하였다. 4. 작업 단계별 소요노력은 보온덮개B에 비하여 킬딩은 6% 많았으나, 칼라부직A는 6%, 백색니들펀칭 부직포는 15%적었다.

• 소성∙가공
• /
• 제15권1호
• /
• pp.9-14
• /
• 2006

In the present research, the simultaneous punching of ultra small size hole of $2\~10\;{\mu}m$ in diameter on flat rolled thin metal foils was conducted with elastic polymer punch. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of 1.5fm in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The process set-up is similar to that of the flexible rubber pad farming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions. The effects of the wafer die hole dimension and heat treatment of the workpiece on ultra small size hole formation of the thin foil were discussed. The process condition such as proper die shape, pressure, pressure rate and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole away in a one step operation.

• Journal of Biosystems Engineering
• /
• 제18권3호
• /
• pp.270-274
• /
• 1993

Many researches have been performed to shorten drying time and cost of red pepper in Korea. Nevertheless, an effective drying method for red pepper is not developed yet. This study was conducted to analyze the effect of opening ratio of red pepper's surface on drying for development of an effective drying method. The drying method with punching treatment is expected to be effectively utilized for shortening drying time and improving quality of red pepper.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.488-502
• /
• 2020

In this study, the moisture absorption and desorption properties presented by the Health-Friendly Housing Construction Standards of South Korea were compared using the wood of three tree species (Douglas-fir, Hinoki, Larch) and two types of wood-based materials(Plywood, WML Board^Ⓡ). The national standards for functional building materials present that the amounts of moisture absorption and desorption should be at least 65g/㎡ on average, respectively according to the test method under KS F 2611:2009. Therefore, in this study, the moisture absorption/desorption properties of materials with no treatment (Control), with punching, and with surface stain finishing and the moisture absorption/desorption property improvement effects of the treatments were compared and analyzed. According to the results of this study, it was evaluated that all five types of wood and wood-based materials tested did not satisfy the amount of moisture absorption/desorption of at least 65g/㎡, which is the performance standard for moisture absorption/desorption functional building materials, indicating that untreated wood and wood-based materials cannot be applied as functional finishing materials according to the Health-Friendly Housing Construction Standards. The surface stain finishing greatly reduced the moisture absorption and desorption rates of the materials, and the amounts of moisture absorbed and desorbed were also shown to decrease by at least two times on average. When the surfaces of the materials were punched with Ø4mm holes at intervals of 20 mm, the moisture absorption/desorption areas increased from 18% to 51%, and this increase was shown to be capable of increasing the amounts of moisture absorbed/desorbed by 29% on average at the minimum, and 81% on average at the maximum. The effects of punching were shown to be identical even in cases where the materials were stain finished. For the application of wood or wood-based materials as eco-friendly, health-friendly, and moisture absorption/desorption functional building materials hereafter, it is judged that new physical and chemical improvement studies should be conducted, and treatment methods should be developed.