• 전자공학회논문지SC
• /
• 제40권5호
• /
• pp.333-340
• /
• 2003

도플러 처리(Doppler processing) 기능은 잔류(residue) 클러터(clutter)의 제거뿐만 아니라 위상정합누적(coherent integration)을 수행하므로, 펄스 도플러 레이더에 있어서 가장 핵심적인 역할을 수행한다. 디지털 신호처리기(DSP : digital signal processor)의 성능향상과 더불어 DSP를 이용한 구현이 점점 일반화 되어가고 있다. 도플러 처리기가 입력신호를 실시간으로 처리하기 위해서는, 다중 DSP를 이용한 병렬처리 개념이 일반적으로 사용되어야 한다. 본 논문에서는 아날로그 디바이스사의 ADSP21060 8개를 탑재한 Morocco-2 보드를 사용하여 MTI(moving target indicator)필터, 도플러 필터뱅크(DFB : Doppler filter bank) 및 제곱검출기(square-law detector) 등으로 구성된 프로그램 가능한 구조의 도플러 처리기를 구성하였다. 위상정합처리구간(CPI : coherent processing interval) 동안 수신된 입력데이터의 분배(distribution)시간, 출력데이터의 전송(transfer)시간 및 알고리즘 수행에 소요되는 연산시간 등을 수식으로 표현하여, 전체 처리시간과 도플러 처리기 구현에 소요되는 DSP의 수를 예측하였다. 또한 레이더 운용에 필요한 각종 타이밍신호 및 모의 표적신호를 발생할 수 있는 TSG(timing signal generator)를 이용하여 도플러 처리기의 실시간 연산기능을 확인하였다.

• 한국동물위생학회지
• /
• 제34권3호
• /
• pp.217-226
• /
• 2011

Salmonella spp. is of increasing public health concern as causative pathogens of food poisoning. The aim of this study was to investigate the serotypes and antimicrobial resistance pattern of Salmonella spp. isolated from duck farms in Daegu-Gyeongbuk province. Also, S. Enteritidis and S. Typhimurium isolates were further examined for plasmid analysis, phage typing and pulsed-field gel electrophoresis (PFGE). A total of 34 Salmonella spp. (16.4%) were isolated from duck farms and ten serotypes were identified. The predominant serotypes were S. Typhimurium (23.5%) S. Fyris (17.6%) and S. Haardt (11.8%), S. Agona and S. Enteritidis (respectively 8.8%). Of 34 Salmonella isolates, 15 (44.1%) isolates were resistant to at least one antimicrobial agent and multiple resistance (resistance to more than 4 drugs) was observed in 9 strains (26.5%). The high resistance was found to streptomycin (32.4%), tetracycline (29.4%), ampicillin, kanamycin and nalidixic acid (respectively, 26.5%), all Salmonella isolates were susceptible to cefoxitin, cefotaxime, gentamicin, amikacin and ciprofloxacin. All S. Enteritidis and S. Typhimurium isolates were found to contain only one plasmid (ca. 54 or 55kb, respectively). Among the S. Enteritidis isolates, two phage types were found, PT32a and PT1c, respectively, one isolates did not react with any of the phages used. Whereas, all S. Typhimurium isolates were RDNC (reacts but does not conform). PFGE showed to be a useful typing method better than plasmid analysis and phage typing for discrimination of isolates especially, S. Typhimurium isolates. Our results indicated that the serotypes of Salmonella isolates are widely distributed in duck farms, further epidemiological studies should be carried out.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.377-386
• /
• 1996

오스테나이트 스테인리스강 304L을 고질소 저압 분위기에서 400~$600^{\circ}C$ 범위내의 온도변수 $50^{\circ}$간격차이에 따라 펄스 직류 플라즈마를 발생시켜 펄스작용 시간비에 따라 5시간씩 질화처리를 실시하였다. 처리온도 $500^{\circ}C$를 전후하여 질화처리층의 상과 조직이 현저히 다르게 형성되었다. $500^{\circ}C$미만 범위에서 저온일수록 펄스작용 시간비가 높을 때 질화층은 일종의 비화학량론적인 질화 스테인리스강으로 형성되었고 박피막을 이루며 균열이 많이 발생했다. 처리온도가 $500^{\circ}C$보다 높을 때는 온도가 높아지거나 펄스작용 시간비가 50s/100s로 높아짐에 따라 질화층은 CrN 및 Fe4N 위주로 구성되어 주상정 조직을 이루며 균일하게 성장하며 무균열층이 된다. $500^{\circ}C$에서는 저온 조직 및 상과 고온 조직 및 상이 혼합된 질화층이 형성되며 취성이 대단히 크다.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.954-967
• /
• 1996

Laser application to modify healthy permanent dentin to improve microhardness and caries resistence has been previously reported but the physical modification and ablation thresholds of carious and sclerotic dentin has yet to be identified. This study determined the energy density required by modify (physical modification threshold, PMT) and remove (ablation threshold, AT) infected carious, affected and selerotic dentin compared to healthy permanent dentin. $1{\pm}0.25mm$ thick dentin sections(n=272) from extracted human teeth were used. Smear layer was removed 0.5M EDTA for 2 minutes. Utilizing three pulsed fiberopitc delivered contact lasers with different emission wavelengths($1.06{\mu}m$=Nd : YAG, $2.10{\mu}m$=Ho : YAG and $2.94{\mu}mEr$ : YAG). The energy density($J/cm^2$) was incrementally increased and the resulting tissue interaction classified on a scale from 0-6. A minimum of 5 repetitions/energy density were completed. Light microscopy(10-25X) was used to verify the physical modification(scale=3) and ablation thresholds(scale=4) of the various forms of dentin and the data were analyzed by logistic regression at the 95 % confidence interval. PMT and AT by the laser and the dentin types were: PMT and AT was lower in infected dentin than in sound dentin for all lasers. PMT and AT induced by Nd : YAG>Ho : YAG>Er : YAG for all forms of dentin. Microhardness was increased in sound dentin at PMT. Morphology of crater examined by light microscopy showed Nd : YAG was safe and effective for removing carious dentin and Er: YAG was effective for removing sound dentin. The PMT and AT for YAG lasers are different as a function of dentin type which may be utilized for selective modification and removal of dentin.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.33-42
• /
• 2000

The purpose of this study was to compare the wound healing process after skin incision using scalpel, $CO_2$ laser and pulsed Nd:YAG laser in rats. After skin on the back was incised 3 cm long, rats were sacrificed at 1, 3, 7, 14, 21 and 28 days. Macroscopic, histologic and immunohistochemical examinations using the collagen type IV and the CD34 antibodies which are necessary to the forming process of new capillary were performed. Results obtained were as follows ; Macroscopically the initial wound healing of the laser group was about $1{\sim}2$ weeks slower than that of the scalpel group. There weren't however any remarkable differences in all groups in 4 weeks after incision. By histologic finding, acute inflammatory cells were more prominent during the initial wound healing in the scalpel group than in the other groups. Epithelialization started in the order of scalpel, $CO_2$ and Nd:YAG laser group after skin incision. By the Masson's trichrome stain, collagen synthesis in the Nd:YAG laser group was more slowly initiated than in the other groups. But it was completed at the $3{\sim}4$ weeks in all groups. Immunohistochemically, collagen type IV and CD34 expression were markedly increased at 2 weeks in the scalpel and $CO_2$ laser group. Meanwhile, in the Nd:YAG laser group, these reactions were observed later tan the other groups. Collagen type IV and CD34 expression were decreased in all groups after 4 weeks. These results suggest that $CO_2$ and Nd:YAG laser showed similar healing process compared with scalpel and a potential substitute for scalpel in skin incision.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.297-297
• /
• 2008

Buffer layers play an important role in the development of high critical current density coated conductor. $LaMnO_3$, $SrTiO_3$ and $BaZrO_3$ buffer layers were compatible with MgO surfaces and also provide a good template for growing high current density REBCO(RE=Rare earth) films. Systematic studies on the influences of pulsed laser deposition parameters (deposition temperature, deposition pressure, processing gas, laser energy density, etc.) on microstructure and texture properties of $LaMnO_3$, $SrTiO_3$ and $BaZrO_3$ films as buffer layer deposited on ion-beam assisted deposition MgO (IBAD_MgO) template by pulse laser deposition method, were carried out. These results will be presented together with the discussion on the possible use of this material in HTS coated conductor as buffer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.331-332
• /
• 2008

Couplings between electric, magnetic, and structural order parameters result in the so-called multiferroic phenomena with two or more ferroic phenomena such as ferroelectricity, ferromagnetism, or ferroelasticity. The simultaneous ferroelectricity and ferromagnetism (magnetoelectricity) permits potential applications in information storage, spintronics, and magnetic or electric field sensors. The perovskite BiFeO3(BFO) is known to be antiferromagnetic below the Neel temperature of 647K and ferroelectric with a high Curie temperature of 1043K. It exhibits weak magnetism at room temperature due to the residual moment from a canted spin structure. It is likely that non-stoichiometry and second-phase formation are the factors responsible for leakage current in BFO. It has been suggested that oxygen non-stoichiometry leads to valence fluctuations of Fe ions in BFO, resulting in high conductivity. To reduce the large leakage current of BFO, one attempt is to make donor-doped BFO compounds and thin films. In this study, (Bi1-x,Ndx)(Fe1-y,Tiy)O3 thin films have been deposited on Pt(111)/TiO2/SiO2/Si substrates by pulsed laser deposition. The effect of dopants on the phase evolution and surface morphology are analyzed. Furthermore, electrical and magnetic properties are measured and their coupling characteristics are discussed.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.602-607
• /
• 2013

Concern for the TOS (Transparent Oxide Semiconductor) is increasing with the recent increase in interest for flexible device. Especially MgZnO has attracted a lot of attention. $Mg_xZn_{1-x}O$, which ZnO-based wideband-gap alloys is tuneable the band-gap ranges from 3.36 eV to 7.8 eV. In particular, the flexible substrate, the crystal structure of the amorphous as well as the surface morphology is not good. So research of MgZnO thin films growth on flexible substrate is essential. Therefore, in this study, we studied on the effects of the oxygen partial pressure on the structural and crystalline of $Mg_{0.1}Zn_{0.9}O$ thin films. MgZnO thin films were deposited on PES substrate by using pulsed laser deposition. We used XRD and AFM in order to observe the structural characteristics of MgZnO thin films. UV-visible spectrophotometer was used to get the band gap and transmittance. Crystallization was done at a low oxygen partial pressure. The crystallinity of MgZnO thin films with increasing temperature was improved, Grain size and RMS of the films were increased. MgZnO thin films showed high transmittance over 80% in the visible region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1604-1607
• /
• 2009

YAG laser crystallization of Si-based thin film deposited on plastic substrate has been studied. The Si-based thin films as crystallization precursor are with varied hydrogen (H) content. The effect of the H content on the crystallinity of the resulted poly-Si film has been investigated. The experimental results of the poly-Si crystallized by doublefrequency YAG laser shows that the initial dehydrogenation process could be left out if ${\mu}c$-Si was adopted as the crystallization precursor. The YAG laser annealing condition on plastic substrate and the crystallization results have been discussed in the paper.