• 전기학회논문지
• /
• 제57권6호
• /
• pp.1022-1025
• /
• 2008

This paper presents the generation of the high voltage squarewave pulse using distributed RLC circuit. The demonstrated test was performed with the distributed RLC circuit which consists of the resistance, the inductance and the capacitance. Pspice simulation was also conducted about the experiment circuit. The result of the experiment was in good agreement with the result of the simulation. Theoretical analysis of the initial peak value at the squraewave pulse was derived from the results of the experiment and simulation. Additionally, the characteristics of the time delay was analyzed about the spherical gap switch and the surface discharge gap switch, respectively. It is concluded that the surface discharge gap switch is better than the spherical gap switch to reduce the time delay.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.707-711
• /
• 1998

Ultrasonic test usually was used for defect detection, crack depth measurements and strength estimation of hardened concrete. The essence of the pulse velocity method is that the transition time of an ultrasonic longitudinal pulse is measured in concrete. Ultrasonic velocity was propagated to the age of concrete, made a radical change at that time when concrete was setted. This study which monitored the change in a concrete by ultrasonic test was performed to estimate initial setting and final setting.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권11호
• /
• pp.508-514
• /
• 2005

In this paper, it was investigated the characteristics of PD(partial discharge) pulse shapes in oil and the possibility of TF(Time-Frequency) analysis for the discrimination of air corona in on-site PD measurement of oil transformers. For the purpose, single and multiple discharges combined with oil discharges and air corona were generated and measured by use of artificial models through the HFPD pulse detector and the oscilloscope. PD pulse shapes were different according to the type of defects, especially including air corona- pulses. Also, through the TF analysis, data clusters could be classified each other in the TF Map, even in the case of multiple discharges. Therefore, it is known that TF analysis could be aprlied for the improvement of on-site PD measurement in oil transformers.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.51-54
• /
• 2019

실리콘 기판상에 여러 조건의 전류밀도에서 로듐 도금을 실시하였다. 직류전원의 경우 전류밀도가 증가하면 로듐 표면에 균열이 발생하였다. 잔류응력을 낮추기 위하여 펄스전류를 인가하였다. 펄스전류의 off 시간이 도금층의 잔류응력을 낮추는데 영향을 주었다. 펄스전류의 인가 주기를 5:5로 하였을 경우 균열 없는 로듐 도금층을 얻었다.

• Journal of Acupuncture Research
• /
• 제32권2호
• /
• pp.105-121
• /
• 2015

Objectives : The purpose of this study is to observe the effects of Sa-am acupuncture with tonifications of kidney and urinary bladder on radial pulse in healthy subjects. Methods : Sixty healthy subjects participated in this study, and were divided into a kidney tonifying acupuncture group(KI group), urinary bladder tonifying acupuncture group(BL group) and control group. Radial pulse was measured by 3 dimensional pulse imaging system(DMP-3000) before, immediately after, 30 minutes after, and 60 minutes after acupuncture at Cun, Guan, and Chi in each time. Results : 1. BL group exhibited significantly reduced T1 / T, T4 / T, T4 / (T-T4), T5 / T and increased(T-T4) / T compared to KI group. 2. BL group showed increase of radial augmentation index / heart rate(RAI / HR) in left Cun, H5, Ad / Ap in left Chi, H1, As / Ap in right Chi compared to KI group. BL group showed decrease of As / Ap, Aw / Ap in left Chi, H1, pulse depth, Ad / Ap in right Chi compared to KI group. 3. KI group showed increase of Aw / Ap, H1, H2, H4, pulse area in right Guan, pulse depth in right Chi compared to BL group. KI group showed decrease of RAI in left Cun, applied pressure, pulse depth in left Guan, Aw / Ap in right Chi compared to BL group. Conclusions : The effects of Sa-am acupuncture with tonifications of kidney and urinary bladder in healthy humans have been observed on various parameters. The parameters analysed in this study can be used to differentiate the effects of Sa-am acupuncture with tonifications of kidney and urinary bladder on radial pulse.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.486-493
• /
• 2015

설치된 데크재에 대한 성능을 평가하기 위하여 초음파 비파괴시험법을 사용하였다. 먼저 3종류의 데크재에 대해 트랜스듀서의 배치에 따른 직접법과 간접법간의 측정방법간의 차이를 검증하였으며 두 번째로 설치된 데크재의 사용시간의 경과에 따른 초음파속도를 측정 비교하였다. 마지막으로 데크재의 사용수명을 파악하기 위하여 사용시간의 경과에 따른 초음파속도의 변화를 조사하였다. 시험결과 직접법과 간접법간의 측정방법간의 차이는 없는 것으로 나타났으며 직접법에 대한 간접법의 비율은 1.02와 1.05로 각각 나타났다. 설치된 데크재에서 시간의 경과에 따라 초음파 속도는 감소하였으며 이들 간의 관계는 선형으로 나타났다. 시험결과로부터 초음파 비파괴시험법은 설치된 데크재의 유지보수에 관한 효율적인 수단이 될 수 있을 것으로 생각된다.

• 융합신호처리학회논문지
• /
• 제10권1호
• /
• pp.60-65
• /
• 2009

본 논문에서는 Chebychev 항등식과 Bessel 계수로부터 유도 될 수 있는 새로운 지수펄스모형함수를 제안하고 그 특성을 고찰한다. 제안된 지수펄스모형함수는 매개변수 변화에 따라 시간과 주파수영역에서 서로 다른 특성을 갖는 다양한 펄스 모형함수를 발생시킬 수 있다. 그리고 지수펄스모형함수의 미분함수로부터 여러 형태를 갖는 새로운 펄스모형함수를 얻을 수 있다. 미분으로부터 얻어지는 지수펄스함수의 짝수 계와 홀수 계 미분 함수간은 직교성을 유지한다. 이러한 기본적인 특성을 통상적인 Gaussian 펄스 모형함수와 비교 분석함으로써 그 유용성을 확인한다. 통신시스템의 요구 설계조건에 따라 최적의 지수펄스파형을 선택하여 사용할 수 있다.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.681-686
• /
• 2019

본 논문은 동일 크기의 인버터 체인을 가진 지연 버퍼를 사용한 펄스 수축방식에 기반된 CMOS 온도 센서를 제안한다. 온도 센서는 2 개의 서로 다른 온도 지연 라인을 가진 온도에 비례하여 펄스를 생성하는 온도-펄스 변환기( TPC)와 공정 변화에 민감하지 않도록 동일 크기를 가진 인버터 체인을 사용하여 펄스를 수축하여 디지털 값으로 변환하는 시간-디지털 변환기(TDC)로 구성된다. 칩은 공급 전압이 3.3 V인 $0.35{\mu}m$ CMOS 공정을 이용하여 $0.49{\mu}m{\times}0.23{\mu}m$의 면적으로 구현되었다. 측정 결과 $0^{\circ}C{\sim}100^{\circ}C$의 온도 센서 범위에 분해능은 9-비트 데이터에서 $0.24^{\circ}C/bit$를 가진다.

• 대한한의학원전학회지
• /
• 제33권4호
• /
• pp.21-32
• /
• 2020

Objectives : Pulse descriptions in Korean Medical texts are comprised of combinations of pulse terminology, where various combinations of pulse terminology are used to describe disease symptoms. For Korean Medical doctors and professionals, however, it is impossible to identify the entirety of pulse description combinations, and their understanding is mostly limited to those learned from classical texts studied individually. Methods :This research was carried out by using Access of Microsoft Office 365 in Windows 10 of Microsoft. Pulse descriptions were extracted from the text, 『Euijongsonik』. In the final stages, the automatically extracted list of pulse descriptions was refined through [excluded terminology of pulse description]. Results : The PC environment of this research was Intel Core i7-1065G7 CPU 1.30GHz, with 8GB of RAM and a Windows 10 64bit operation system. Out of 6,115 verses 6,497 descriptions were primarily extracted, and after a refinement process, the final list contained 5,507 pulse descriptions. Conclusions : Based on the assumption that classical texts are available in data form to be processed by programs, current research methodology demonstrated that it was more efficient in regards to time and man power to create a pulse description database compared to when the researcher manually created one.

• 동의생리병리학회지
• /
• 제23권1호
• /
• pp.174-179
• /
• 2009

Arterial pulse palpation is an important diagnostic method in Oriental Medicine, particularly for obtaining information about a patient's health conditions or illness, or for confirming a diagnostic conclusion based on the patient's pulsation. The pulse analyzer is both a leading Oriental Medical equipment and a promising tool with such a strong industrial ripple effect that it was selected as one of the four strategic tools for world Oriental Medical instrument market domination at a recent survey. Although various pulse analyzers had been developed, however, most of these were not widely used for clinical diagnosis, due perhaps to lack of the appliance's reliability caused by its inability to reflect the requirements of the clinicians. Thus, in this thesis, the clinical requirements for the pulse analyzer were identified and analyzed by conducting a questionnaire survey among Oriental Medicine clinicians. By looking into the basic functions of a pulse analyzer, the required measurement time, and the medical insurance fee required were determined and among others, the appliance's specific requirements were determined. Moreover, by investigating on the latest patent trend, the technical elements that are needed for the development of a next-generation pulse analyzer were identified. Through these processes, the flow of the technology that must be developed for the pulse analyzer was determined, and the direction for the development of the specific pulse analyzer hardware, sensor, and diagnostic algorithm was identified and proposed.