• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.102-103
• /
• 2003

최근 고도 경제성장으로 인한 공업화와 그에 따른 업종이 다양해짐에 따라 여기에 수반되어 발생되는 대기오염물질이 증가할 뿐만 아니라 종류도 여러가지로 다양해지고 있다. 대부분 산업공정에서 배출되는 미세먼지 입자는 기존의 집진장치로 거의 포집제거가 불가능하여 대부분이 대기중으로 방출되고 있는 실정이다. 분진 중에서도 입경 l$\mu\textrm{m}$이하의 분진들은 침강 속도가 작아 거의 gas와 동일한 거동을 하기 때문에 기관 또는 폐포에 침착하여 호흡기에 영향을 미치므로 그 발생량과 화학적 성상이 문제화되고 있는 추세이다. (중략)

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.276-280
• /
• 1998

This paper proposes a harmonic a harmonic reduction technique of the parallel-connected twelve-pulse thyristor rectifiers. The proposed system is an improvement over the diode rectifier system with an active interphase reactor [2]. In this scheme, a low KVA (0.15 Po (PU) ) active current source injects a triangular current into an interphase reactor of a twelve-pulse thyristor rectifier along the phase delay angle. The current injection results in near sinusoidal input current with less than 1% THD. Detailed analysis of the proposed scheme along scheme along with design equations is illustrated. Simulation results verify the concept.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.86-91
• /
• 2009

The electrons injected into a laser wakefield undergo betatron oscillation and give rise to the emission of intense X-ray radiation. To investigate the generation conditions of the X-rays, the relativistic motion of an electron injected in an off-axis position has been simulated with wakefield profiles which are pre-calculated with a two-dimensional particle-in-cell code. The wakefield with a plasma density of $1.78{\times}10^{18}\;cm^{-3}$ is generated by the laser with an intensity of $1.37{\times}10^{18}\;W/cm^2$ and a pulse width of 30 fs. From the calculation of the single particle motion, the characteristics of the betatron radiation are investigated in the time domain. As the transverse injection position increases, the power and the duration time of the radiation increase, but the width of each pulse decreases.

• 한국인터넷방송통신학회논문지
• /
• 제16권4호
• /
• pp.47-52
• /
• 2016

본 연구에서는 고고도 핵폭발에 기인한 HEMP의 영향으로부터 민간시설의 적합한 보호를 위한 HEMP 보호용 전원선 필터 구현 필요성을 다루기 위해, HEMP 관련 국방 규격 분석 및 바리스터, 관통형 커패시터, 가스방전관, 인덕터 등의 주요 소자들에 대한 분석을 수행하고, 이를 기반으로 단상 220VAC/16A 용량의 HEMP용 전원선 필터를 간이 제작하였다. 또한 배선용 차단기, 서지 보호기, EMI 필터 등과의 MIL-STD-188-125 PCI 규격 기반의 비교 실험을 수행하였다. 결과적으로 HEMP에 의한 전도성 노이즈로부터 시스템을 보호하기 위해서는 HEMP 보호 전용 필터의 개발이 필수조건임을 확인하였다.

• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.31-38
• /
• 2013

A pulse driven atmospheric plasma jet controlled by external ballast capacitor is developed. Unlike the most commonly use DBD sources, the proposed device utilizes bare metal electrode. The discharge energy per pulse can precisely be determined by changing voltage and capacitance of the ballast capacitor. It is shown that the device can provide wide range of plasma, from stable glow mode to near arc state. Current-voltage waveforms, optical emission spectra and discharge images are investigated as a function of an injection energy. The OES shows that He and oxygen lines are increased as a function of the external ballast capacitor. Ozone and rotational temperature have similar tendency with a power consumption. The feeding gas is He and the applied DC voltage is from 400V to 800V when the gap distance is $500{\mu}m$.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.121-126
• /
• 2010

HEMP분야에 대한 연구는 1950년대 이후 미국을 중심으로 핵을 보유한 국가에 의해 주로 국가방위를 목적으로 수천 건의 연구가 집중적으로 이루어졌다. HEMP 방호설비의 핵심은 차폐, 필터링, 접지, 과전압 보호로 구성된다. 이중에서 투자비용이 가장 높은 차폐실 설계에 있어 기존에 나와 있는 이론식을 적용하여 시뮬레이션을 하면 특정 주파수 대역을 제외하고 실제 측정값과 전혀 맞지 않는 모순이 있었다. 본 논문에서는 HEMP 방호용 차폐실의 최적설계를 위해 기존 이론식을 개선하여 실제 측정값과 넓은 주파수 범위에서 잘 일치할 수 있는 이론을 제시하고, 각각의 재료정수에 따라 설계전에 충분하게 시뮬레이션을 거쳐 경제적이고 효과적으로 HEMP 방호용 차폐실을 건설할 수 있도록 하는 시뮬레이터를 개발하였다.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.957-966
• /
• 2014

Some of DC actuators used in home automation, office automation, medical equipment and automotive systems require a position sensor. In low power applications, the introduction of such a transducer remarkably increases the whole system cost, which justifies the development of sensorless position estimation techniques. The well-known AC motor drive sensorless techniques exploiting the fundamental component of the back electromotive force cannot be used on DC motor drives. In addition, the sophisticated approaches based on current or voltage signal injection cannot be used. Therefore, an effective and inexpensive sensorless position estimation technique suitable for DC motors is presented in this paper. This technique exploits the periodic pulses of the armature current caused by commutation. It is based on a simple pulse counting algorithm, suitable for coping with the rather large variability of the pulse frequency and it leads to the realization of a sensorless position control system for low cost, medium performance systems, like those in the field of automotive applications.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.259-263
• /
• 2006

The applicability of UPT (Ultrasound Pulse Thermography) for real-time defect detection of the ceramic heating plate is described. The ceramic heating plate with superior insulation and high radiation is used to control the water temperature in underwater environment. The underwater temperature control system can be damaged owing to the short circuit, which resulted from the defect of the ceramic heating plate. A high power ultrasonic energy with pulse duration of 280 ms was injected into the ceramic heating plate in the vertical direction. The ultrasound excited vibration energy sent into the component propagate inside the sample until they were converted to the heat in the vicinity of the defect. Therefore, an injection of the ultrasound pulse wave which results in heat generation, turns the defect into a local thermal wave transmitter. Its local emission is monitored and recorded via the thermal infrared camera at the surface which is processed by image recording system. Measurements were Performed on 4 kinds of samples, composed of 3 intact plates and the defect plate. The observed thermal image revealed two area of crack in the defective ceramic heating plate.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.305-308
• /
• 2000

A technique to suppress the low frequency ripple voltage of the DC output in three phase buck diode rectifiers is presented in this paper. The proposed pulse frequency modulation methods and duty ratio modulation methods are employed to regulate the output voltage of the buck diode rectifiers and guarantee zero-current -switching(ZCS) of the switch over the wide load range The proposed control methods used in this paper provide generally good performance such as low THD of the input line current and unity power factor. IN addition control methods can be effectively used to suppress the low frequency ripple voltage appeared in the dc output voltage. The harmonic injection technique illustrates its validity and effectiveness through the simulations.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.422-429
• /
• 2008

This paper presents compact low frequency ultra-wide band (UWB) sensor design and study of the partial discharge diagnosis by sensing electromagnetic pulse emitted from the partial discharge source with the newly designed UWB sensor. In this study, we designed a new type of compact low frequency UWB sensor based on microstrip antenna technology to detect both the low frequency and high frequency band of the partial discharge signal. Experiments of offline PD testing on medium voltage (22.9kV) underground cable mention the comparative results with the traditional HFCT as a reference sensor in the laboratory. In the series of comparative tests, the calibration signal injection test provided with the conventional IEC 60270 method and high voltage injection testing are included.