• 연구논문집
• /
• 통권24호
• /
• pp.27-39
• /
• 1994

lower vibration than in any other small refrigerators. The experimental results of three types of pulse tube refrigerators are presented in this paper. The objectives of this study are to develop the design technology of the double inlet pulse tube refrigerator and acquire its application method. As a preliminary experiment, the refrigeration performances of the basic, orifice and double inlet pulse tube refrigerator were investigated. The lowest temperature obtained in this experiment was 34.4K. The refrigeration capacity at the optimum operating condition of the double inlet pulse tube refrigerator was 23W at 80K.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.43-47
• /
• 2007

In this paper, we propose a novel sensor system for measuring the arterial pulse in an oral cavity. In order to measure pulse wave in oral cavity, the proposed system is designed with reflection type arterial wave sensor, not by using transmission type arterial pulse wave sensor. Driving circuit through pulse current is designed for solving self-heating problem of LED. The effectiveness of the proposed sensor system is compared with pulse wave between pulse wave of oral cavity and other body parts as well as with characteristic measurements. The experiment shows that the proposed sensor system is adaptive to capturing consecutive and meaningful biometric signals through the variation of pulse wave changes in oral cavity when exercising. The study result expects to design and develop mobile sensors which could be adapted to healthcare devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.313-316
• /
• 1997

Two different issues, design of reduced-order robust model predictive control and input signal design for identification of a MIMO system, are addressed and design techniques based on singular value decomposition(SVD) of the pulse response circulant matrix(PRCM) are proposed. For this, we investigate the properties of the PRCM, which is a periodic approximation of a linear discrete-time system, and show its SVD represents the directional as well as the frequency decomposition of the system. Usefulness of the PRCM and effectiveness of the proposed design techniques are demonstrated through numerical examples.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.805-812
• /
• 1990

In this paper, a design on the superconducting monolith for superconducting pulse magnet is described. Both stability and AC loss parameters are used in the design process, which restricted various design parameters. Determined design parameters satisfy both stability and AC loss restrictions. Finally superconducting monolith is flattened, fitting for magnet and acquiring transposition effect.

• Earthquakes and Structures
• /
• 제10권1호
• /
• pp.239-260
• /
• 2016

Tuned mass dampers (TMDs) have been frequently proposed to mitigate the detrimental effects of dynamic loadings in structural systems. The effectiveness of this protection strategy has been demonstrated for wind-induced vibrations and, to some extent, for seismic loadings. Within this framework, recent numerical studies have shown that beneficial effects can be achieved by placing a linear TMD on the roof of linear elastic structural systems subjected to pulse-like ground motions. Motivated by these positive outcomes, closed-form design formulations have been also proposed to optimize the device's parameters. For structural systems that undergo a near-fault pulse-like ground motion, however, it is unlikely that their dynamic response be linear elastic. Hence, it is very important to understand whether such strategy is effective for inelastic structural systems. In order to provide new useful insights about this issue, the paper presents statistical results obtained from a numerical study conducted for three shear-type hysteretic (softening-type) systems having 4, 8 and 16 stories equipped with a linear elastic TMD. The effectiveness of two design procedures is discussed by examining the performances of the protected systems subjected to 124 natural pulse-like earthquakes.

• 한국전자파학회논문지
• /
• 제26권4호
• /
• pp.389-396
• /
• 2015

펄스 유도(Pulse Induction) 방식의 금속 탐지기 코일 설계에 대하여 살펴보았다. 0.3 mm, 0.5 mm, 1.0 mm의 직경을 갖는 도선과 $30cm{\times}30cm$ 및 $35cm{\times}35cm$ 크기의 유전체 탐지판을 이용하여 탐지 코일을 제작하였고, 코일 크기와 코일 감은 수 등의 파라미터 변화에 따른 코일 시정수 및 코일 전류 등의 특성을 살펴보았다. 도선의 직경, 코일 크기 및 코일 감은 수 변화에 따른 코일의 인덕턴스, 저항 및 시정수 값에 대하여 계산 결과와 측정 결과를 비교 분석하였다. 또한, 입력 펄스폭 변화에 따른 탐지 코일의 전류 변화에 대하여 계산 결과와 측정 결과를 비교 분석함으로써 펄스 유도 방식의 금속탐지기 코일 설계에 대하여 논하였다.

• 한국산업정보학회논문지
• /
• 제27권5호
• /
• pp.49-59
• /
• 2022

SHAPE 알고리즘은 펄스의 스펙트럼 형태를 원하는 대로 성형하면서, 이 외의 특성에는 왜곡을 발생시키지 않도록 설계할 수 있다는 장점이 있어 기존의 능동소나 펄스 설계에 활용되었다. 본 논문에서는 다중상태 소나 시스템을 위한 펄스를 설계할 때, 주파수 대역에서 인접한 펄스 간의 상호상관도를 감소시키면서도 펄스 자체의 성능 저하를 방지하기 위해 SHAPE 알고리즘을 적용한 펄스 신호 설계 기법을 제안한다. 이를 위해서 SHAPE 알고리즘의 경계함수를 펄스 대역폭으로 제한하도록 설정하였다. 제안하는 설계 기법을 사인화 주파수 변조 펄스 신호에 적용한 결과 상호상관도를 의미하는 peak cross-correlation level (PCCL)이 44.23 dB 감소하였다. PCCL이 수십 dB 감소하였음에도 모호성 함수의 변화가 크게 관찰되지 않았으며, 부엽의 평균값을 의미하는 integrated sidelobe level (ISL)이 11.64 dB 증가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.49-51
• /
• 2007

It is as result that study to apply mini magnet nerve curer in peripheral nervous system disease treatment. Design and embodied action power and Control Unit in cylinder form of magnet roof object firstly. Yielded service area about special quality of probe of roof object cylinder style and treatment area dimension and distance of treatment pulse secondly. Embody pulse forming course energy value by Probe's form by third, could embody treatment pulse by disease. Specially, through a special quality experiment, saved Damping pulse torn and treatment pulse form etc. variously. Lately, embodied this to aid a little in disease treatment that follow that there is no invasion that there is no stimulation by medicine development. Go amplitude treatment pulse (traditional magneto-therapy of greatly great that strong) does curative effect greatest at short time and becomes thought that demand is magnified greatly at the future in this research.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1631-1636
• /
• 2010

본 연구는 AFM 을 이용하여 nano scale 의 Lithography 를 구현하는 것이다. 외부의 pulse generator 를 통하여 전류를 통전 시키는 방법을 수정함으로써, 일정 습도를 유지한 상태의 AFM 내부에서 Si-wafer 의 표면과 Tip의 사이에 전원을 인가하고 pulse generator 에서 임의로 pulse 폭의 변화를 준다. Si-wafer 표면에서 물 분자가 Tip과 wafer 사이의 직접적인 전류의 이동조절로 인해 전기 화학적 반응을 적절히 제한하여 산화물을 생성시키는 방법이다. 이렇게 생성된 산화물은 불산 처리를 통하여 산화물을 식각시켜 미세 그루브를 구현 할 수 있다. 본 연구를 통한 나노 패턴 생성 기법은 나노 머시닝 기술의 진보에 잠재적 가능성을 제시한다.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.331-341
• /
• 2018

This study proposes an integrated serial spring-damper mechanism as a dual pulse generation system. Compared to the traditional dual pulse generation system, which used multiple springs and a damper to generate a dual pulse critical for impact testing of naval equipments, currently used separated serial spring-damper mechanism is comprised of two components: an air spring, and a damper. The proposed mechanism combines the two components into one integrated system with a unique design that lets simply changing the volume and the pressure of the air tank, and the length of the annular pipe adjust the stiffness and damping constants for testing, eliminating the need to have multiple sets of air springs and dampers. Simulations using MatLab and Simulink were conducted to verify the feasibility of this design. The results show the potential of an integrated serial spring-damper mechanism as a more convenient and flexible mechanism for dual pulse generation system.