• 제목/요약/키워드: Pulse characterization

검색결과 147건 처리시간 0.025초

UWB 안테나 링크 특성화를 위한 네트워크 분석기를 이용한 시간영역 측정 및 분석기술 연구 (Study of Time Domain Measurement and Analysis Technique Using Network Analyzer for UWB Antenna link Characterization)

  • 고영목;김민종;김근용;나극환
    • 전자공학회논문지
    • /
    • 제49권10호
    • /
    • pp.69-80
    • /
    • 2012
  • 본 논문에서는 임펄스 신호를 방사하는 UWB 안테나의 링크 특성을 분석하기 위해 주파수영역에서 안테나 특성을 측정하기 위해 사용하는 네트워크 분석기를 이용한 시간영역 측정 및 분석기술에 대해 연구하였다. 이를 위해 네트워크 분석기에서 획득한 데이터를 줌-인(Zoom-In)이 가능한 시간영역으로 변환하기 위한 CZT(Chirp z-Transform) 알고리즘을 개발하였다. 개발된 CZT 알고리즘을 이용하여 주파수영역에서 각 안테나 링크에 대한 파형분석을 통해 표준이산푸리에 변환(Discrete Fourier Transform)보다 고속으로 변환이 가능하고 임의의 원하는 구간을 줌-인 함으로서 효율적으로 파형분석이 가능함을 증명하였다.

고온 초전도 마이크로스트립 패치 안테나; 비방사면 급전방식을 이용한 초전도 안테나 특성 (High Tc Superconducting Microstrip Patch antenna ; Characterization of Superconducting Antenna using Non-Radiating Edge Feeding Technique)

  • 정동철;박성진;황종선;박종광;한병성
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제49권7호
    • /
    • pp.375-381
    • /
    • 2000
  • In this paper, we described the characterization of High-Tc Superconducting(HTS) microstrip antenna using non-radiating edge feeding technique and reported the microwave properties of HTS antennas with temperature. To do this, we prepared the $YBa_2Cu_3O_{7-x}$ superconducting thin film on MgO substrate using pulse-laser deposition techniques. The HTS microstrip antenna using non-radiating feeding technique was fabricated using chemical wet-etching. Then it was compared with identical antenna patterned with evaporated gold. The diverse measured results have been reported in terms of the input impedance, resonant frequency and return loss. In additional, at around the critical temperature, the effect of kinetic inductance which affect the resonant characteristic of the HTS microstrip antenna was reported.

  • PDF

Synthesis and Characterization of Peripherally Ferrocene-modified Zinc Phthalocyanine for Dye-sensitized Solar Cell

  • An, Min-Shi;Kim, Soon-Wha;Hong, Jong-Dal
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권11호
    • /
    • pp.3272-3278
    • /
    • 2010
  • Synthesis and structural characterization of peripherally ferrocene-substituted zinc phthalocyanine (ZnPc-Fc) were carried out for efficient far-red/near-IR performance in dye-sensitized nanostructured $TiO_2$ solar cells. Incorporating ferrocene into phthalocyanine strongly improved the dye solubility in polar organic solvents, and reduced surface aggregation due to the steric effect of bulky ferrocene substituents. The involvement of electron transfer reaction pathways between ferrocene and phthalocyanine in ZnPc-Fc was evidenced by completely quenched fluorescence from S1 state (< 0.08% vs ZnPc). Strong absorption bands at 542 and 682 nm were observed in the transient absorption spectroscopy of ZnPc-Fc in DMSO, which was excited at a 670 nm laser pulse with a 15 ps full width at half maximum. Also, the excited state absorption signals at 450 - 600 and 750 - 850 nm appeared from the formation of charge separated state of phthalocyanine's anion. The lifetime of the charge separate state in ZnPc-Fc was determined to be $170{\pm}8$ ps, which was almost 17 times shorter than that of the ZnPc.

테라헤르츠파를 이용한 풍력터빈 블레이드 NDE 탐상 평가기법 (NDE Inspecting Techniques for Wind Turbine Blades Using Terahertz Waves)

  • 임광희;김선규;정종안;조영태;우용득
    • 공학기술논문지
    • /
    • 제11권4호
    • /
    • pp.245-251
    • /
    • 2018
  • Terahertz waves (T-ray) was extensively studied for the NDE (nondestructive evaluation) of characterization of trailing edges for a use of turbines composed with composite materials. The used NDE system were consisted of both CW(Continuous wave) and TDS (Time domain spectroscopy). The FRP composites were utilized for two kinds of both trailing edges of wind energy (non-conducting polymeric composites) and carbon fiber composites with conducting properties. The signals of T-ray in the TDS (Time domain spectroscopy) mode resembles almost that of ultrasound waves; however, a terahertz pulse could not penetrate a material with conductivity unlike ultrasound. Also, a method was suggested to obtain the "n" in the materials, which is called the refractive index (n). The data of refractive index (n) could be solved for the trailing edges. The trailing edges were scanned for characterization and inspection. C-scan and B-scan images were obtained and best optimal NDE techniques were suggested for complicated geometry samples by terahertz radiation. Especially, it is found that the defect image of T-ray corresponded with defect locations for the trailing edges of wind mill.

위암 조직의 자기공명영상과 초음파 소견에 대한 비교 연구 (In Vitro Imaging of MRI and Ultrasound for Gastric Carcinoma)

  • 길성원;지금난
    • Investigative Magnetic Resonance Imaging
    • /
    • 제12권2호
    • /
    • pp.178-187
    • /
    • 2008
  • 목적 : 위암 조직의 종양 침범 깊이와 주위 조직으로의 침윤 정도를 초음파와 자기공명영상을 시행하여 그 진단적 유용성을 알아보고 자기공명영상의 경우 종양을 가장 잘 보여주는 펄스 연쇄에 대해 알아보고자 하였다. 대상 및 방법 : 위의 부분 혹은 전절제술을 받아 병리적으로 위암으로 확진된 53예의 제거된 위암 조직을 대상으로 하였다. 모든 조직은 자기공명영상과 고주파수 탐촉자로 초음파 영상을 얻었다. 각 조직에 대하여 자기공명영상과 초음파 소견을 각각 독립적으로 종양의 탐지 및 종양의 침범 깊이에 대하여 두 명의 방사선과 전문의가 합의하에 평가하였고 각각의 영상 소견을 병리 조직 소견과 비교하여 두 영상 기기 간에 진단의 정확도를 비교하였다. 자기공명영상은 스핀에코 T1 강조 영상, 위상 및 탈위상 경사에코 T1 강조영상, 고속스핀에코 및 단발포고속스핀에코 T2 강조영상의 다섯 펄스 연쇄를 얻었고 이 중 종양의 탐지와 묘출에 우수하다고 평가된 영상 기법을 알아보았다. 결과 : 조기 위암의 경우, 초음파 진단의 정확도는 77%로 자기공명영상의 진단적 정확도 59% 보다 우수하였으나 통계적으로 유의한 차이는 없었다 (p=0.096). 진행성 위암의 경우 자기공명영상이나 초음파 각각 97%와 84%의 높은 진단적 정확도를 보여주었으며 자기공명영상이 초음파에 비하여 통계적으로 유의하게 종양병기를 정확하게 진단했다 (p<0.001). 자기공명영상의 다섯 가지 펄스연쇄 중에 종양 침윤 깊이를 선명하고 정확하게 보여준다고 평가된 영상은 조기 위암과 진행성 위암 모두 고속스핀에코 T2 강조영상(75%)이었고, 특히 진행성 위암의 경우 총 93.5%에서 고속스핀에코 T2 강조영상이 우수한 영상 소견을 보였다. 결론 : 자기공명영상과 초음파는 진행성 위암 조직의 종양 병기를 평가하는데 높은 진단적 정확성을 갖고 있으며 자기공명영상이 초음파보다 통계적으로 유의하게 종양병기를 정확하게 진단했다. 위암 조직의 종양 병기를 평가하는데 가장 우수한 자기공명영상 기법은 고속스핀에코 T2 강조영상이었다.

  • PDF

레이저 공정을 이용한 고온초전도 멀티플렉서의 제작과 특성 분석 (Investigation of Characterization and Fabrication High-Temperature Superconducting Multiplexer by Pulse laser Deposition)

  • 김철수;송석천;이상렬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1858-1860
    • /
    • 1999
  • To fabricate superconducting multiplexers with narrow pass band characteristics and reduce the physical size of device, we have designed multiplexer using hair-pin type filters with the center frequency of 13.6 GHz. Multiplexers have been fabricated superconductor(HTS), because It has low surface resistance. The $YBa_2Cu_3O_{7-{\delta}}$(YBCO) films were deposited on MgO substrates$(20{\times}20{\times}0.5mm^3)$ by using pulsed laser deposition and conventional photo-lithographic methods were used to pattern the multiplexer. Epitaxial YBCO films were grown on(100) MgO substrates and showed strongly c_axis orientations observed by X-ray diffraction technique. Superconducting transition temperatures were measured to be about 89K. Simulated results of superconducting multiplexer consisting of hair-pin type filters show the insertion loss of about 1.2dB. The measured frequency response will be compared with the simulated results.

  • PDF

Wavelength-Tunable, Passively Mode-Locked Erbium-Doped Fiber Master-Oscillator Incorporating a Semiconductor Saturable Absorber Mirror

  • Vazquez-Zuniga, Luis A.;Jeong, Yoonchan
    • Journal of the Optical Society of Korea
    • /
    • 제17권2호
    • /
    • pp.117-129
    • /
    • 2013
  • We briefly review the recent progress in passively mode-locked fiber lasers (PMLFLs) based on semiconductor saturable absorber mirrors (SESAMs) and discuss the detailed characterization of a SESAM-based, passively mode-locked erbium-doped fiber (EDF) laser operating in the 1.5-${\mu}m$ spectral range for various configurations. A simple and compact design of the laser cavity enables the PMLFL to generate either femtosecond or wavelength-tunable picosecond pulses with high stability as the intra-cavity filtering method is altered. All the cavities investigated in our experiments present self-starting, continuous-wave mode-locking with no Q-switching instabilities. The excellent stability of the source eventually enables the wavelength-tunable PMLFL to be used as a master oscillator for a power-amplifier source based on a large-core EDF, generating picosecond pulses of >10-kW peak power and >100-nJ pulse energy.

반도체 브릿지의 플라즈마 특성 연구 (A Study on the Plasma Characterization of Semiconductor Bridge)

  • 이응조;장석태;장승교
    • 한국추진공학회지
    • /
    • 제2권2호
    • /
    • pp.1-13
    • /
    • 1998
  • 반도체 브릿지(Semiconductor bridge, SCB)에 30$\mu\textrm{s}$ 이내의 짧은 시간 동안 펄스 형태의 에너지를 공급할 경우 SCB는 화약을 발화시킬 수 있는 플리즈마를 생성한다. 초고속 카메라를 이용하여 플라즈마의 형태를 관찰하였고 발생시간, 지속 시간 등을 알아보았다. 공급된 에너지의 양이 많을수록 플라즈마는 빨리 생성되고 그 크기도 비례적으로 증가하였다. SCB 작동시 브릿지 양단의 전압 변화를 기록하여 초고속 카메라 상과 비교함으로써 전압 곡선의 변화를 해석하였다.

  • PDF

C-rate별 고출력 원통형 리튬이온 원통형 셀의 충격 시험 기반 내부 특성 비교 분석 (The inner characteristics comparison analysis of each c-rate of the high power cylindrical lithium ion cell based on the shock test)

  • 이평연;김종훈;장민호
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.383-384
    • /
    • 2016
  • 본 논문에서 shock test를 적용한 고출력 리튬이온 원통형 셀의 내부 전기화학적 특성을 비교하였다. 용량이 동일한 고출력 리튬이온 원통형 셀을 사용하여 shock test를 적용하였다. 충격 전후에 OCV (Open Circuit Voltage) 및 HPPC (Hybrid Pulse Power Characterization) 테스트 기반 방전용량 및 내부저항을 측정하였으며 이를 통해 각 고출력 리튬이온 원통형 셀의 일정한 변화율을 확보하였다.

  • PDF

고출력 리튬이온 배터리의 RUL을 위한 내부 파라미터 변화 비교분석 (Internal parameter comparative analysis for the RUL of high-power lithium-ion battery)

  • 김윤상;김종훈;이평연;장민호
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.311-312
    • /
    • 2016
  • 본 논문에서는 사이즈가 다른 고출력 원통형 리튬이온 배터리의 Remaining Useful Life(RUL)을 방전용량 기반으로 전기적 특성분석을 실시하였다. 우선, 배터리의 충/방전이 계속될 시 용량이 어떻게 변화하는지 실험해보았으며, 만충 전압(Fully Charged)에서 만방 전압(Fully Discharged) 까지의 각각의 State-Of-Charge(SOC)에서 Hybrid Pulse Power Characterization (HPPC) Test를 이용해 충전 저항과 방전 저항을 구하여, 용량과 저항의 관계를 파악하였으며, 배터리 RUL을 알기 위한 기본 정보를 확보했다.

  • PDF