• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1577-1579
• /
• 1994

200-MW pulse modulators(total 11units) for the PLS linac employ the SCR phase control circuit. It controls 3-phase AC line voltage for the high-voltage DC power supply (DCPS, maximum of 25kVDC, 4.2A) which charges the pulse forming network(PFN). The PFN delivers 400kV, 500A, ESW $7.5{\mu}s$ pulse power to the 80-MW klystron amplifier tube. The SCR regulates 3-phase AC power and feeds to the high voltage transformer. Two different types of the transformer configurations namely ${\Delta}-{\Delta}$ and ${\Delta}-Y$, are alternatively installed to 11 modulator units for the suppression of harmonic noises. RC filters and reactors are also installed. Currently, approximately 110-kW of average AC power per unit is consumed at the normal operation level of the modulator with 30pps. This paper presents the operational characteristics of the high power pulse modulator, especially the experimental results of the AC line harmonic components generated by the operation of the high power pulse modulator to suppress the switching noises from the SCR and rectifying diode arrays.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.822-825
• /
• 2004

This paper describes the improvement of performance of power supply for ship's emergency lighting system(SELS). Proposed system is composed of power factor correction (PFC) circuit, emergency power supply system (EPSS), half bridge(HB) inverter, fluorescent lamp(FL) starting circuit and microprocessor control system. Experimental works using proposed system confirm that speedy and stable power to be supplied when main power source cut-off, compared with conventional relay type, and control power factor up to $97.5[\%]$ and input power up to $35.0[\%]$ by adjusting of pulse frequency of the HB inverter.

• 한국전자파학회논문지
• /
• 제22권4호
• /
• pp.440-446
• /
• 2011

본 논문에서는 레이더 시스템에 적용이 가능한 50 W 출력을 가지는 X-대역 pulsed SSPA(Solid State Power Amplifier)를 설계 및 제작하였다. SSPA를 펄스 모드로 동작시키는 방법으로 펄스 변조 방법과 전원 스위칭 방법을 혼용한 방법을 제안하였다. SSPA는 구동 증폭기, 고출력 증폭기, 펄스 변조기로 구성되며, 충분한 이득과 출력 크기를 얻기 위해 25 W GaAs FET 4개를 병렬 구조로 구성하였다. 측정 결과 1.12 GHz 대역폭에서 출력 50 W, 이득 44.2 dB의 성능을 가졌다. 또한, pulse droop은 1 dB 이하로 설계 목표를 만족하였으며, 12.45 ns 이하의 상승/하강 시간을 가졌다. 제작된 X-대역 pulsed SSPA 크기는 $150{\times}105{\times}30\;mm^3$로 매우 작은 크기를 가졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1755-1757
• /
• 1998

Pulse transformers have been developed to apply for pulsed power technology as an alternative of a Marx generator. To obtain repetitive pulsed power generation, it is necessary to observe the rising time of output of pulse transformer. In this paper, using the equivalent circuit, The rising wave of output of pulse transformer is simulated for various input wave by using the Electromagnetic transient program(EMTP).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.507-510
• /
• 2005

High voltage pulse power supply using Marx generator and solid-state switches is proposed in this study. The Marx generator is composed of 12 stages and each stage is made of IGBT stack, two diode stacks, and capacitor. To charge the capacitors of each stage in parallel, inductive charging method is used and this method results in high efficiency and high repetition rates. It can generate the pulse voltage with the following parameters: Voltage: up to 120kv Rising time: sub ${\mu}S$ Pulse width: up to $10{\mu}S$, Pulse repetition rate: 1000pps The proposed pulsed power generator uses IGBT stack with a simple driver and has modular design. So this system structure gives compactness and easiness to implement total system. Some experimental results are included to verify the system performances in this paper.

• 한국컴퓨터산업학회논문지
• /
• 제2권8호
• /
• pp.1055-1062
• /
• 2001

본 연구에서는 1KHz 부근의 펄스 반복율을 가지는 경제적이고 컴팩트한 펄스형 $CO_2$ 레이저의 개발에 관해서 기술하였다. 고압 고주파 펄스 변압기와 수 십 KHz의 스위칭에 적합한 IGBT를 사용한 고압 펄스전원 장치를 레이저 공진기에 접목시켜 새로운 방식의 고반복 $CO_2$ 레이저 장치를 개발하였다. 전원장치에 사용된 2개의 IGBT를 정밀하게 제어하기 위해서 제어부에는 PIC 마이크로프로세서가 사용되었고 공진기는 수냉방식의 저속축류형으로 제작되었다. 완성된 장치의 펄스 반복율과 동작압력 그리고 레이저 매질 가스의 혼합비의 변화에 따른 레이저빔의 출력 특성실험을 통하여 가스 배압비 $CO_2$： $N_2$：He ＝ 1：9：15펄스 반복율 700 Hz, 동작압력 15 Torr에서 최대 레이저 출력 약 20.5 W, 최대 효율 약 8%를 달성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1072-1074
• /
• 1999

In this study, it is the purpose to develope a cheap and compact pulsed $CO_2$ laser with pulse repetition rate range of 1 kHz. We used a IGBT switched power supply as a power supply, which is cheap and simple comparing to others. PIC one-chip microprocessor was used for precise control of a laser power supply on the control part. And the laser cavity was fabricated as an axial and water cooled type. The laser performance characteristics as various parameters, such as pulse repetition rate gas pressure, and gas mixture rate have been investigated. The experiment was done under the condition of total pressure of $CO_2:N_2$:He = 1.3:10, 1:1.5:5 1:9:15 from 6 Torr to 15 Torr and pulse repetition rate from 100 Hz to 900 Hz. As a result, the maximum average output was about 20.5 W at the total pressure of 15 Torr, the gas mixture $CO_2:N_2$:He = 1:9:15 and the pulse repetition rate of 700 Hz.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.180-184
• /
• 2001

The high operation frequency mainly reduces transformer volume in the power supply. A high frequency and high voltage pulse transformer is designed, fabricated, and tested. Switching frequency of the transformer is 100 kHz. Input and output voltages of the transformer are 250 V and 4 kV, respectively. Normal operation power of the transformer is 3 kW. Maximum volume of the transformer is 400 $cm^3$. The power density is thus 7.5 W/$cm^3$. The transformer will be installed in a metal box that has nominal operation temperature of 85 degree centigrade. The transformer and other high voltage components in the box will be molded with Silicon RTV(Room Temperature Vulcaniza) that has a very low thermal conductivity. Procedure of design and test results are discussed. Analytical as well as experimental results of varous paramters such as transformer loss, leakage inductance, distributed capacitance are also discussed. In addition, thermal analysis results from ANSYS code for three different operation conditions are discussed.

• 전력전자학회논문지
• /
• 제7권4호
• /
• pp.332-338
• /
• 2002

토카막 장치의 초전도 코일에 사용되는 전원 공급장치는 초대형급(20kA) 직류 전원 공급기로서 빠른 전류제어 응답성과 매우 작은 정상상태 리플이 필수적이다. 특히 역전류 공급이 가능한 회생형 컨버터의 운전중 전류 방향이 바뀌는 순간에도 전류기준값을 잘 추종하는 것이 중요하다. 이러한 조건들을 만족시키기 위하여 입력측에 2중 출력($\Delta$, Y)를 갖는 변압기와 출력단에 상간변압기(interphase transformer, IPT)를 이용한 12펄스 싸이리스터 듀얼 컨버터를 설계, 제작하였다. 각 컨버터에서 출력되는 전류의 합이 부하전류 지령치를 따르도록 제어하는 동시에 차 전류의 평균값이 영이 되도록 함으로써 각 컨버터의 부하 분담율을 일정하게 하여 상간 변압기의 포화를 방지한다. 대전류 코일 전류 공급장치의 양방향 전류 제어 성능을 높이기 위하여 위상각 검출 및 게이팅 지연각 구현을 디지털화하고 컨버터 전류방향 정역절환시 초기 응답특성을 개선하는 방법을 제안하였다. 또한 시뮬레이션과 실부하 전류실험을 통해 제안된 제어기의 동작성능을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1060-1062
• /
• 1999

Pulsed Nd:YAG laser is used widely for materials processing and instrumentation. It is very important to control the laser energy density in materials processing by a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, the alternating charge-discharge system was designed to adjust a pulse repetition rate. And the parallel mesh is added to increase laser output power. This system is controlled by one chip microprocessor and allows to replace an expensive condenser for high frequency to a cheap condenser for low frequency. In addition, we have investigated the current pulse shape of flashlamp and the operating characteristics of a pulsed Nd:YAG laser. As a result, it is found that the laser output of the power supply using the parallel mesh and the alternating charge-discharge system is not less than that of typical power supply. As the pulse repetition rate rises from 10pps to 110pps by the step of 20pps at 1000V and 1200V, it is found that the laser efficiency decreases but the laser output power increases about 5W at each step.