• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1157-1166
• /
• 2001

본 논문에서는 분산 천이 광섬유를 전송로로 채택한 10 Gbps, 20 Gbps, 40 Gbps 전송 시스템에서의 전력 대칭 MSSI(mid-span spectral inversion)에 의한 보상 정도를 변조된 광 펄스의 다양한 첩 파라미터에 따라 분석하였다. 우선 각각의 전송 속도에서 입력 전력 변화에 따른 수신단에서의 EOP(eye-opening penalty)를 계산하여 수신 성능을 양호하게 유지할 수 있는 최대 입력 전력의 크기를 첩 파라미터에 따라 살펴보았다. 또한 MSSI의 장거리 광대역 WDM 전송 시스템에의 적용 가능성을 확인해 보기 위하여 송신단부터 광 위상 공액기(OPC; optical phase conjugator)가지의 첫 번째 광섬유의 분산 계수 D$_{11}$ 변동에 따른 EOP의 고찰을 통해 수신 성능이 양호하게 유지될 수 있는 송신 과장의 범위를 살펴보았다. 본 논문에서 제안된 최적 펌프 전력 조건을 유지하는 MSSI 방법은 이상 분산(anomalous dispersion) 영역에서 변조 과정을 통해 광 펄스에 인가된 초기 첩이 up-chirp 인 경우보다 down-chirp인 경우에서 더욱 효과적임을 확인할 수 있었고. 장거리 WDM 전송에서 비트율에 따라 3.5 dBm 이상의 비교적 높은 전력으로 수~수 십 nm 이상의 광대역 전송이 가능하다는 것을 확인할 수 있었다.다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.323-326
• /
• 1999

For decrease the harmonic current components of the power source, a first method is insert the choke coil that used the choke input type rectifier, the booster chopper circuit and buck chopper circuit. And the several method are studying like as the PWM(Pulse Width Modulation) converter and the active filter type which is used the high frequency switching and the sinusoidal wave formed input current. In this type, there are many problem as a low efficiency, increased the noise, the high leakage current and cost up by the high frequency switching. For improve this problems, the partial resonan method is used on the booster inducter and lossles snubber condenser. This method decreased the distortion factor has lower harmonic components than the hard switching and there is no switching loss by the ZCS(Zero Current Switching) at switch turn-on and the ZVS(Zero Voltage Swithcing) at switch turn-off

• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.577-582
• /
• 2015

This paper proposes an efficient detection of absolute position of a robot joint using two incremental encoders. We considers a robot joint comprising a motor, a reducer, two encoders, and a motor drive. An incremental(first) encoder provides motor's rotor position or input position of reducer while another incremental(second) encoder does output position of the reducer. A table is made where the relationship between the first and the second encoder counts is recorded. The key point is placed where the table is constructed: when a pulse occurs in the second encoder, there exists a corresponding unique count value of the first encoder. The absolute position is detected using the table by searching the second encoder position corresponding to the first encoder count value when a pulse occurs in the second encoder. The proposed method needs a small rotation, as just one second encoder's pulse angle, for the initial absolute position detection.

• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.527-536
• /
• 1987

PLZT ceramics of composition La/Zr/Ti=X/65/35(X=5-10 at.%) were fabricated by two state sintering technique.Transparent PLZT ceramics were obtained in the composition above 8 at. % La. Variations of electrooptic properties in the compositions between 8 at. % and 9 at. % La were able to be expected from the significant differences of P-E hysteresis curve and the changes of dielectric phase transition. The range of birefringence of 8/65/35 specimen was 4.08${\times}$10-3. Domain switching of 9/65/35 specimen was agreed with the applied electric pulse because input pulse signal corresponds to optical pulse response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.83-86
• /
• 2003

In this paper, arbitrary pulse power for electro chemical etching, which manufactures the groove of fluid dynamic bearing and aero dynamic bearing, is presented. For high precision manufacture, we generally use high precision CNC machine. However, this case has the disadvantage that cost is very expensive and bur due to bites of tool can be generated. So most of companies are interested in the method of electro chemical etching. But for more precision results, it is important to decision the parameters of electrical conditions, such as currents and frequency. We designed and made the arbitrary pulse power system easy to input the parameters for optimal conditions. Experimental results show the effectiveness of the system strategy proposed for the high precision manufacture.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2653-2655
• /
• 1999

A technique to suppress the low frequency ripple voltage of the DC output voltage in three-phase buck diode rectifiers is presented. A pulse frequency modulation method is employed to regulate the output voltage of the rectifier and guarantee zero-current switching of the switch over the wide operating range. The pulse frequency control method used in this paper shows generally good performance such as low THD of the input line current and unity power factor. In addition, the pulse frequency method can be effectively used to suppress the low frequency voltage ripple appeared in the dc output voltage. The proposed technique illustrates its validity and effectiveness through the respective simulations and experiments.

• 전기학회논문지
• /
• 제67권8호
• /
• pp.1062-1070
• /
• 2018

This paper presents a simple identification method for discrete-time low-order model of unknown delay process from pulse response. The key idea is to find the parameters of the model such that the first N moments of the unknown process and the model are equal. We first show that the k-th moment of a process can be determined by the moments of the input and output. The parameters and delay are estimated separately. It is shown that for a given delay, the parameters of the low-order model can be determined by solving linear equations in a matrix form. Delay of the model is estimated such that the integral of the absolute errors (IAE) of the candidate models with possible delays minimizes. The illustrative example shows that the proposed method can directly identify low-order models without order reduction process from a single pulse response.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.95-99
• /
• 1996

In this paper, we proposed a method to measure the gap between the magnetic pole and the levitated object applying the inductance characteristic which vary according to gap. We made a driving circuit which supply the control input PWM(Pulse Width Modulation) signal and the carrier PWM signal to estimate the gap. Because the inductance is a function of gap, and the current of the carrier signal is a function of the inductance. We investigated the validity of the proposed method through the experimental results.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.10-14
• /
• 1981

This paper deals with design of circuit that gives a linear relationship between the voltage controlling the Phase delay an인e of thrysistor trigger pulse and the average voltage in the load. The design is based an the method of linear triggering of thrysistion. It is shown that method is also effective with the input signal how variable frequencies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.34-36
• /
• 2008

This paper is given a full detail of mathematical analyses of input current for novel active type power factor correction(PFC) AC-DC converter of step up-down added electric isolation. These are compared with harmonics components of input current for a conventional PFC converter of electric isolation type. The proposed PFC converter is constructed in using a new loss-less snubber circuit to achieve a soft switching of control device. Also the proposed converter for discontinuous conduction mode(DCM) eliminates the complicated circuit control requirement and reduces the size of components. The input current waveform in the proposed converter is got to be a sinusoidal form of discontinuous pulse in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, input power factor is nearly unity and the control method is simple. Particularly, the stored energy of loss-less snubber capacitor is recovered with input side and increases input current from resonant operation. The result is that input power factor of the proposed converter is higher than that of a conventional PFC converter. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.