• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1521-1523
• /
• 2005

High voltage plasma power supply was adopted to control polluted gases and an ozone generation. Bidirectional pulse power supply consisted of power semiconductor switch devices, a high voltage transformer, and a control board adapted switching method. Plasma power supply with sinusoidal bidirectional pulse, which has output voltage range of 0-20kV and output frequency range of 1kHz-20kHz, is realized. Using proposed system, pulsed high voltage/high frequency discharges were tested in a DBD(dielectric barrier discharge) reactor, and the spatial distribution of a glow discharge was observed. The system showed stable operational characteristics, even though the voltage and the frequency increased. Above features were verified by experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.223-226
• /
• 2004

This paper analyzes the accuracy of free space path loss and matched filter gain approximated by using a passband rectangular pulse for ultra wideband (UWB) radio systems. The example causal signal, a modulated Gaussian pulse with the same center frequency and frequency bandwidth of the passband rectangular pulse, is used to consider the accuracy. The path loss and matched filter gain of the modulated Gaussian pulse are simulated for the reference results. The UWB free space path loss is shown and is compared with that obtained from simulation and Friis' transmission formula. The UWB matched filter gain is shown and compared with simulation results. From the results, we can see that the UWB path loss formula is more accurate than the Friis' transmission formula. The results from the UWB free space path loss and matched filter gain formulas agree with the simulation. Then, these free space path loss and matched filter gain formulas approximated by using a passband rectangular pulse are appropriate for UWB system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.1020-1026
• /
• 2013

Multirate filtering process on the biological signals like Electrocardiogram (ECG) and Photoplethysmogram (PPG) can be defined as the digital signal processing algorithm in which the sampling rate varies to omit or interpolate the intermediate values between the sampled data. With this aim, we suggest a new multirate filtering algorithm by deleting the extraneous data to eliminate the unwanted degradations such as granular noise due to the usage of high sampling frequency and simultaneously to detect the fiducial features of ECG and PPG with reducing the complexity of resolving fiducial points such as R-peak, Pulse peak and Pulse Transit Time (PTT). After the experimental simulations performed, we can conclude the fact that we can detect the fiducial features of ECG and PPG signal in terms of R-peak, Pulse peak and PTT without the loss of accuracy even if we do not maintain the original sampling frequency.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.942-948
• /
• 2011

Solid propulsion systems have simple structures compared to other propulsion systems and are suitable for long-term storage. However the systems generally have limits on control of thrust levels. In this paper we introduce controllers for combustion chamber pressure using on-off control techniques which have been known for relatively easy implementation and energy efficiency. For this, we use a simple pressure change model by considering only mass conservation within the combustion chamber and we design a classical controllers and on-off controllers with are Pulse Width Modulation(PWM) and Pulse Width Pulse Frequency Modulation (PWPFM). Then we compare the performance results of the controllers through numerical simulations.

• Journal of the Optical Society of Korea
• /
• v.19 no.2
• /
• pp.123-129
• /
• 2015

A pulse is generated when the heart pumps blood into the arterial system. The heart pumps blood only when it contracts, not when it relaxes; therefore, blood enters the arterial system in a cyclical form. Artery beating is visible in some parts of the body surface, such as the radial artery of the wrist. This paper mainly uses the feature in which near-infrared spectroscopy penetrates skin to construct a non-invasive measurement system that can measure small vibration in the subcutaneous tissue of the human body, and then uses it for the pulse measurement. This measurement system uses the optical moir$\acute{e}$ principle, together with the fringe displacement made by small vibration in the subcutaneous tissue, and an image analysis program to calculate the height variation from small vibrations in the subcutaneous tissue. It completes a measurement system that records height variation with time, and that together with a fast Fourier transform (FFT) program, they can convert the pulse waveform generated by vibration (time-amplitude) to heartbeat frequency (frequency-amplitude). This is a new and non-invasive medical assistance system for measuring the pulse of the human body, with the advantages of being simple, fast, safe and objective.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.158-165
• /
• 2016

Many researches for improving detection performance in the reverberation environment have been conducted in active sonar systems. Especially the type of active pulse makes an impact on the detection performance in the reverberation environment. Thus, this paper describes the detection performance of PTFM (Pulse Trains of Frequency Modulated waveform), Costas, and Geometric Comb pulses which are known for their outstanding performance against the reverberation. Sea trial data of those pulses was analyzed and it was figured out that the range resolution of PTFM pulse was deteriorated by its sub-pulses. Costas pulse showed performance degradations of the doppler resolution by multipath signals. Geometric Comb pulse showed the best doppler resolution.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.18-25
• /
• 2009

Conventional series-resonant pulse frequency modulation controlled DC-DC high power converters with a high-frequency transformer link which is designed for driving the high power microwave generator has the problem of hard switching commutation at turn-on and turn-off of active power switching devices. This problem is due to the influence of the magnetizing current of the high-frequency transformer. This paper presents a novel prototype for a high-frequency transformer using parasitic parameters with a lossless inductive snubber and a series resonant capacitor assisted series-resonant zero current switching pulse frequency modulated DC-DC power converter, which is designed using a high power magnetron for microwave ovens. In order to implement a complete and efficient soft switching commutation, the performance of the new converter topology is practically confirmed and evaluated in the prototype of a power microwave generator.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1169-1171
• /
• 2002

In this paper, RFRPP(Random Frequency Randomized Pulse Position ) PWM for three-phase voltage-controlled inverters is proposed. The LLPWM(Lead-Lag PWM) techinquc is that three switching pulses are located randomly back and forth in each switching interval. But with the restriction of random distribution, the harmonic spectrum cannot be dispersedly and continuously distributed. This paper calculates the duty ratio of the switching pulse firstly. Second, the switching pulses are located randomly in the switching interval. Third, the fixed switching frequency of the space vector modulation is randomly varied. To verify the validity of the proposed technique, simulation study is tried using Matlab/Simulink. When a proposed techniquc is employed, the harmonic spectrum of the inverter output voltagc varies from one cycle to the next and the EMI(Electromagnetic Interference) and resonant vibration are greatly alleviated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.682-685
• /
• 2004

This paper investigated a method for classifying emotional states by using pulse wave signal. It focused on finding effective features for emotional state classification. The emptional states considered here consisted of interest and neutral. Classification experiments utilized 65 and 60 samples of interest and neutral states respectively. We have investigated 19 features derived from pulse wave signals by using both time domain and frequency domain analysis methods with 2 classifiers of minimum distance (normalized Euclidean distanece) and ${\kappa}$-Nearest Neighbour. The Leave-one-out cross validation was used as an evaluation mehtod. Based on experimental results, the most efficient features were a combination of 4 features consisting of (i) the mean of the first differences of the smoothed pulse rate time series signal, (ii) the mean of absolute values of the second differences of thel normalized interbeat intervals, (iii) the root mean square successive difference, and (iv) the power in high frequency range in normalized unit, which provided 80.8% average accuracy with ${\kappa}$-Nearest Neighbour classifier.