• 전자공학회논문지
• /
• 제51권9호
• /
• pp.182-189
• /
• 2014

탭 딜레이(tapped delay) 방식은 field-programmable gate arrary(FPGA) 내부 리소스를 이용한 설계에 적합하여 FPGA기반 시간-디지털 변환기(time-to-digital converter)로 널리 사용되고 있다. 그런데 이 방식의 시간-디지털 변환기에서는 지연 소자로 사용하는 전용 캐리체인(dedicated carry chain)의 탭 당 지연시간 차이가 정밀도 저하의 가장 큰 원인이 되고 있다. 본 논문에서는 일반적인 구형파 대신 고정된 시간 폭을 가지는 펄스신호를 지연 소자로 인가하고 상승과 하강 엣지에서 두 번의 시간 측정을 통해 전용 캐리체인내 지연시간의 불균일성을 보상하고 정밀도를 향상하는 시간-디지털 변환기 구조를 제안한다. 제안한 구조는 두 번의 시간 측정을 위해 2개 구역의 전용 캐리체인을 필요로 한다. Dual 엣지 보상 전 두 전용 캐리체인에서 탭 당 지연시간의 평균은 각각 17.3 ps, 16.7 ps에서 보상 후 평균은 11.2 ps, 10.1 ps으로 감소하여 각각 35%, 39% 이상 향상되었다. 가장 중요한 탭 당 최대지연 시간은 41.4 ps, 42.1 ps에서 20.1 ps, 20.8 ps 로 50% 이상 감소하였다.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.1-6
• /
• 2015

We investigate the propagation characteristics of a pulse laser in a time-of-flight laser range finder (TOF-LRF) system with variations in atmospheric conditions, such as temperature, pressure, relative humidity, and the concentration of $CO_2$. The measurement error of distance related with the group velocity change in the TOF-LRF system is analyzed by considering the refractive index of the standard atmosphere with variations in atmospheric conditions. The dependence of the pulse width broadening induced by chromatic dispersion of the standard atmosphere on the operating wavelength and the initial pulse width of the light sources is discussed. The transmission of air with variations in the relative humidity or the concentration of $CO_2$ is analyzed by using different values of absorption coefficients depending on the operation wavelength of the light source in the TOF-LRF system.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 1호
• /
• pp.403-408
• /
• 1999

In this paper, ultrasonic tomography by the Mode-Converted Rayleigh wave (MCRW) in the back-scattered direction is presented. When a beam with a short pulse and narrow beam width enters a reflector with smooth surface, in general, two major arrivals can be observed in the output waveform: the specular reflection and the radiation of the MCRW from the reflector surface. The time-delay between the two waves is relatively large and thus can be measured easily. This large time-delay is due to the fact that the MCRW is slower than incident wave. In our method, this large time- delay is used for ultrasonic image reconstruction. To effectively detect the MCRW, the arrayed-receiving transducers are circularly arranged around the transmitter. In addition, a deconvolution method is employed to remove specular echo signals for reconstructing the MCRW image.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.330-333
• /
• 2000

With the recent development of the ultrahigh-speed optical time division multiplexed system, high-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse seperation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.313-316
• /
• 2004

In this paper analyzed characteristics of the exist ing pulse of the UWB system, modeled TDMG pulse generator without attenuation of pulse width, Then we designed UWB transceiver which load TDMG pulse generator. Result of Simulation, it had high data rate and low BER. As well as, satisfying the spectrum Mask recommended by the FCC

• 한국광학회지
• /
• 제26권6호
• /
• pp.318-321
• /
• 2015

We demonstrate a frequency-resolved optical grating (FROG) device for measuring the intensity and phase versus time of several-tens-of-picoseconds laser pulses, using a thick nonlinear optical crystal. The huge pulse-front tilt generated by a holographic grating increases the temporal range of the device, which can make a single-shot measurement of laser pulses less than 100 ps in duration. To verify the measurement technique, we generate double pulses using a Michelson interferometer. The measured duration of a single pulse is about 300 fs and the measured maximum delay of two pulses is 60 ps, which implies that the proposed FROG device can measure laser pulses with maximum pulse width of about 120 ps.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.167-175
• /
• 2007

A predictive pulse control strategy as a means of improving the energy efficiency of radiant floor heating systems is explored. Experiments at the apartment with floor heating system are conducted to assess and compare the energy performance of the predictive pulse control strategy with an existing conventional control strategy. The Results showed that new suggested PPCM( Predictive Pulse Control Method) was available to decrease the gap of $1{\sim}1.5^{\circ}C$ between maximum and minimum indoor temperature of each rooms. Therefore PPCM method was favor to radiant floor heating system which have a delay time of 10-20 minutes for heat transfer by floor layers.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.56-63
• /
• 2019

Typical negative group delay circuits (NGDC) are analyzed in terms of signal attenuation, group delay, and bandwidth using S-parameters. By inverting these formulations, we derive and present the design equations (for NGD circuit elements) for a desired specification of the two among the three parameters. The proposed design method is validated through simulation examples for narrow- and wide-band pulse inputs in the time and frequency domains. Moreover, an NGDC composed of lumped elements is fabricated at 1 GHz for measurement. As a function of frequency, the circuit-/EM-simulated and measured group delays are in good agreement. The provided simple NGDC design equations may be useful for many applications that require compensations of some signal delays.

• 정보처리학회논문지C
• /
• 제11C권3호
• /
• pp.395-400
• /
• 2004

본 논문에서는 급증되는 무선통신 서비스의 요구에 맞추어 제안된 UWB 시스템 중 반송파를 사용하지 않은 단일 밴드 UWB 시스템용 임펄스를 제안하였다. 기존의 UWB 시스템의 펄스로 제안된 펄스들의 특성과 문제점을 분석하였고, 이를 토대로 펄스폭의 감쇄기술 없이 초광대역의 신호를 발생시키는 TDMG(Time Delay Multiple Gaussian) 펄스를 제안하였다. 제안한 펄스를 수학적으로 전개하였고, 이를 바탕으로 단일밴드 UWB 시스템용 TDMG 펄스 발생기의 하드웨어 구조를 모델링 하였다. 제안한 TDMG 펄스는 컴퓨터 모와 실험을 통해 기존에 제안되었던 펄스의 성능과 비교하였다. 그 결과 기존의 펄스보다 TDMG 펄스가 중심주파수는 약 1GHz이상 높은 대역으로 이동하였고, l0dB fractional bandwidth는 약 1GHz 이상 넓어졌다. 또 n차로 미분한 경우에도 TDMG 펄스의 중심주파수가 각각 1GHz정도 높은 대역으로 이동하였고, 10dB fractional bandwidth도 각각 1GHz 이상 넓어졌다. 즉 기존에 제안된 펄스보다 TDMG 펄스가 주파수 특성도 우수하고, FCC가 권고한 주파수 대역과 스펙트럼 특성을 만족함으로서 다른 이동 무선 통신시스템과의 간섭이 감소한 것을 확인할 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.357-361
• /
• 2013

A regenerative Er-doped fiber amplifier system for a high-repetition-rate optical pulse train is investigated for the first time. A signal pulse train with a wavelength tuning range of 18 nm is produced by a passive mode-locked fiber laser based on a nonlinear polarization rotation technique. In order to realize the amplification, an optical delay-line is used to achieve time match between the pulses' interval and the period of pulse running through the regenerative amplifier. The 16 dB gain is obtained for an input pulse train with a launching power of -30.4 dBm, a center wavelength of 1563.4 nm and a repetition rate of 15.3 MHz. The output properties of signal pulses with different center wavelengths are also discussed. The pulse amplification is found to be different from the regenerative amplification system for CW signals.