• KCI Concrete Journal
• /
• 제14권2호
• /
• pp.86-91
• /
• 2002

This paper presents an experimental study to investigate the behavior of mechanical anchorage of reinforcing bars in concrete members. Three kinds of mechanical anchorage which are a kind of headed reinforcements are considered in this study. Total seven specimens were prepared to consider the effects of anchoring methods (Type A, Type B and Type C) and anchorage lengths of the reinforcing bars (14 $d_{b}$, 12 $d_{b}$, 9 $d_{b}$). Pullout tests conforming to ASTM were carried out to assess the effects of several variables on anchoring strength of bars. Based on the test results, it was concluded that the behavior of the specimen anchored by the mechanical anchorage with the anchor-age length of 12 $d_{b}$, is as good as, or better than that of the specimen anchored by 90-degree standard hook.rd hook.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1502-1508
• /
• 2011

Ground anchor expands the hollow wall of settled part and has the structure which resists the designed tensile load by the bearing pressure generated by the wedge of the anchor body pressing in the expanded part. Such ground anchor has been recognized for stability and economicality since 1960s in technologically advanced nations such as Japan and Europe, and in 1970s, the Japan Society of Soil Engineering has established and announced the anchor concept map. The ground anchor introduced in Korea, however, has the structural problem where the tensile strength is comes only from the ground frictional force due to expansion of the wedge body. In an interval where the ground strength is locally reduced due to fault, discontinuation or such, this is pointed out as a critical weakness where the anchor body of around 1.0m must resist the tensile load. Also, in the installation of concrete block, the concentrated stress of concrete block constructed on the uneven rock surface causes damage, and many such issues in the anchor head have been reported. Thus, in this study, by using the expanded bit for precise expansion of settled part, the ground anchor system was completed so that the bearing pressure of ground anchor can be expressed as much as possible, and the bearing plate was inserted into the ground to resolve the existing issues of concrete block. Through numerical analysis and pullout test executed for verification of site applicability, the pullout-behavior characteristics of anchor was analyzed.

• International Journal of Concrete Structures and Materials
• /
• 제3권2호
• /
• pp.119-126
• /
• 2009

This paper provides a brief summary of the performance of an innovative slip hardening twisted steel fiber in comparison with other fibers including straight steel smooth fiber, high strength steel hooked fiber, SPECTRA (high molecular weight polyethylene) fiber and PVA fiber. First the pull-out of a single fiber is compared under static loading conditions, and slip rate-sensitivity is evaluated. The unique large slip capacity of T-fiber during pullout is based on its untwisting fiber pullout mechanism, which leads to high equivalent bond strength and composites with high ductility. Due to this large slip capacity a smaller amount of T-fibers is needed to obtain strain hardening tensile behavior of fiber reinforced cementitious composites. Second, the performance of different composites using T-fibers and other fibers subjected to tensile and flexural loadings is described and compared. Third, strain rate effect on the behavior of composites reinforced with different types and amounts of fibers is presented to clarify the potential application of HPFRCC for seismic, impact and blast loadings.

• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.495-501
• /
• 2018

Geogrid application that has proved to be an effective and economic method of reinforcing particles, is widely used in geotechnical engineering. The discrete element method (DEM) has been used to investigate the micro mechanics of the geogrid deformation and also the interlocking mechanism that cannot be easily studies in laboratory tests. Two types of realistically shaped geogrid models with square and triangle apertures were developed using parallel bonds in PFC3D. The calibration test simulations have demonstrated that the precisely shaped triangular geogrid model is also able to reproduce the deformation and strength characteristics of geogrids. Moreover, the square and triangular geogrid models were also used in DEM pull-out test simulations with idealized shape particle models for validation. The simulation results have been shown to provide good predictions of pullout force as a function of displacement especially for the initial 30 mm displacement. For the granular material of size 40 mm, both the experimental and DEM results demonstrate that the triangular geogrid of size 75 mm outperforms the square geogrid of size 65 mm. Besides, the simulations have given valuable insight into the interaction between particle and geogrid and also revealed similar deformation behavior of geogrids during pullout. Therefore, the DEM provides a tool which enable to model other possible prototype geogrid and investigate their performance before manufacture.

• 한국농공학회지
• /
• 제32권4호
• /
• pp.71-80
• /
• 1990

Model tests for the ultimate pullout resistance of anchorages and investigation of failure behaviors in cohesionless soil have been conducted. The factors affecting the anchorage are mostly the geometry of the system, and soil properties of sands. The main conclusions of the experimental work were as follows. 1. The load - displacement relationship can be a form of parabolic curve for all plates. 2. The change in ultimate pullout resistance of anchor is mostly affected by embedment ratio and size of anchor, and influenced to a lesser degree by its shape. 3. Critical embedment ratio which is defined as the failure mode changes from shallow to deep mode is increased with increasing height of anchor. 4. For a constant anchor height, as the width of anchor increases the ultimate pullout resistance also increases. However, considering the efficiency of anchor for unit area, width of anchor does not appear to have any sigrnificant contribution on increasing anchor city. 5. Anchor capacity has a linear relation to sand density for any given section and the rate of change increases as the section increases. Critical depth determining the failure patterns of anchor is decreased with a decrease of sand density. 6. With increasing inclination angle, size of anchor, and decreasing embedment ratio, the ultimate pullout resistance of anchor under inclined loading is significantly decreased. 7. The ultimate pullout resistance of double anchor, a method of improving single of anchor capacity, is influenced by the center - to - center spacing adjacent anchors. It is also found that tandem and parallel anchor rigging arrangements decrease the anchor system capacity to less than twice the single anchor capacity due to anchor interference.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.194-200
• /
• 1993

The objective of this study is to clarify analytically the pullout behavior of axial bars from a footing. The bond stress-slip model obtained from the results by the finite element method as well as the pullout tests in massive concrete was used in order to evaluate the slip of bars from the footing. Also, the process of bond mechanism was taken into consideration on order to express the deterioration of bond stress along bars, The shape and magnitude of bond stress distribution depends upon each loading steps. Using equilibrium equation of axial force, $\tau$-S relationship and $\sigma$s-$\varepsilon$s relationship, the differential equations of each loading steps are derived. Applying both boundary and equilibrium conditions to the equations, the amount of slip could be determined. Calculated values on the basis of proposed method evaluation of the slip of bars have a good agreement with the experimental results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.192-193
• /
• 2020

In reinforced concrete adhesion studies, the demolition of the specimen is inevitably involved, and the studies conducted are limited to the macro load-displacement analysis. In order to establish an elaborate model for concrete bonding reinforced rebars, it is necessary to observe the rebar bonding behavior in the in-situ state. In this study, specially manufactured reinforcing bars, micro-UTM and 𝝁-computer tomography (𝝁CT) are used to observe reinforcing bars in the in-situ state. As a result of the monotonic pullout test of the processed reinforcing bar, maximum bond stress were shown to be 16.7MPa, which is slightly higher than the existing 10 to 12 MPa, and then the empty space inside the specimen in which the pullout test was conducted using 𝝁CT was confirmed. Through additional research, the fracture phenomenon of concrete excluding voids will be studied.

• 한국지반공학회논문집
• /
• 제30권3호
• /
• pp.5-16
• /
• 2014

쏘일네일링은 지반과 그라우팅 사이의 주면마찰력과 보강재의 인장력을 통해서 저항하는 공법이다. 인발시험을 할 때는 이 두 요소를 모두 고려한 하중-변위 곡선을 얻게 된다. 따라서 본 논문에서는 지반과 그라우팅 사이의 순 하중-변위 곡선을 산정하여 지반과 그라우팅 사이의 전단거동을 규명하는 것이 목적이다. 주면마찰력 산정 이론을 통해서 이론적으로 지반과 그라우팅 사이의 하중-변위 곡선을 산정하였다. 또한 이론 검증을 위해서 지반조건과 시공조건을 변화해 가며 다량의 현장인발시험을 실시하였다. 인발시험을 통해 산정된 하중-변위 곡선에서 철근의 하중-변위 곡선을 빼내게 되면 지반과 그라우팅 사이의 순 하중-변위 곡선을 산정할 수 있으며, 이를 이론식과 비교해 보았을 때 유사한 결과를 얻었다. 이러한 결과를 통해서 지반 및 시공 조건이 주어질 때, 지반과 쏘일네일링 사이에서 발생하는 변위를 예측할 수 있다.

• 한국지반공학회지:지반
• /
• 제14권6호
• /
• pp.5-16
• /
• 1998

모래지반에서 모형강널말뚝의 수직하중에 대한 거동을 알아보기 위하여 말뚝단면적이 동일하고 플랜지의 개구정도가 각기 다른 5개의 모형말뚝을 제작하였으며, 각 말뚝에 대해 상대밀도, 하중작용방향(압축, 인발)을 달리하여 토조내에서 실내 모형말뚝시험을 수행하였다. 동일한 말뚝에 대해 인발하중을 받는 경우보다 압축하중을 받는 경우가 극한지지력에 있어 100%가량 크며, 상대밀도가 조밀할수록 그 차이는 더욱 증가하였다. 인발재하시험에서 극한지지력과 극한상태의 침하량은 상대밀도가 증가함에 따라 증가하였으며, 동일한 지반조건하에서 개구정도의 변화에 따른 극한지지력과 침하량은 일정한 범위내에 존재하였다. 압축하중조건하에서 극한지지력은 개구정도가 30$^{\circ}$이내에 있을 경우 가장 크게 나타났으며, 상대밀도가 커질수록 이러한 경향이 뚜렷하게 나타났다. 단면의 변화에 따른 극한하중 변화는 하중분포의 해석결과 부분폐색효과에 기인된 것으로 생각된다.

• 한국지반신소재학회논문집
• /
• 제18권2호
• /
• pp.45-54
• /
• 2019

본 연구에서는 원지반의 상대밀도와 세립분 함유율의 조건에 따른 말뚝의 인발거동 특성 규명을 위하여, 유한요소해석을 수행하였다. 수치해석에서는 말뚝과 지반 경계에서의 전단거동을 원활히 모사하기 위해서 경계요소와 경계면 강도감소계수($R_{inter}$)를 부여하였으며, 그 결과를 기존의 실험적 연구결과(You et al., 2018)와 비교함으로써 본 수치해석 방법의 신뢰성을 검증하였고, 말뚝-지반 경계면에서의 변형 특성과 함께 경계요소에 대한 $R_{inter}$값의 결정방법을 제시하였다. 해석 결과, 본 연구에서 적용된 해석모델을 이용한 수치해석은 말뚝의 인발모형실험에 의한 말뚝과 지반의 경계면 특성을 적절하게 모사하였다. 또한 제시된 $R_{inter}$의 적용에 있어서, 반드시 지반의 상대밀도와 세립분 함유율 조건을 고려해야 할 필요가 있음을 확인하였다.