• 한국운동역학회지
• /
• 제15권2호
• /
• pp.21-29
• /
• 2005

The Purpose of this study was to seek determinant factors through analysis of 65 snatch skill kinematic factors of Athletics participated in 2001 Asian weightlifting competetion. The conclusion were as follows ; 1. In order to enhance snatch skill, when barbell move on knee position, One should be flex knee joint to 105-110 degree, and In pull motion, One should be move powerful extension of knee and hip joint. 2. In last pull motion, One try to make more lock out motion than extra extention motion of hip joint 3. In order to enhance snatch skill, It is inportant that elevate barbell highly by last pull motion through powerful knee extention, poweful hip flextion and One should be make lock out motion fast in the same time. 4. In order to enhance snatch skill, anterior-posterior movement width of shoulder joint should be small. 5. In order to enhance snatch skill, Hip joint should be move vertically on start and lock out phase, but In pull phase, extension motion of hip joint shoulde be performed more largely and powerfully.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.275-277
• /
• 1998

The effect of the coil flux, so called "push/pull effect", is to shift the airgap flux density variation due to the magnet alone by a certain amount. Thrust therefore is shift downward or upward. The push/pull effect was presented through the FEM analysis and static tests. We compared with the thrust obtained through the FEM analysis and static tests.

• Advances in pediatric surgery
• /
• 제10권1호
• /
• pp.1-8
• /
• 2004

A re-pull-through operation for Hirschsprung's disease is performed when the primary operation has failed because of the remnant or acquired aganglionosis, anastomotic stricture and/or fistula. The purpose of this study is to review our experience of the re-pull-through procedure for Hirschsprung's disease. From May 1978 to July 2003, 26 patients who underwent re-pull-through operations at the Department of Pediatric Surgery, Seoul National University Children's Hospital, were studied retrospectively by means of chart review as well as telephone interview. The mean age at primary operation and re-operation were llmonths (2 months - 10 years) and 43 months (1 year - 23 years 3 months), respectively. Initial operation for Hirschsprung's disease was Duhamel's procedure in 17, Swenson's in 6 and Soave's 3. Causes of failure of primary operation were remains of secondary aganglionic segment (n=23), vascular arcade injury (n= 1), rectoperineal fistula (n=2, due to mesenteric torsion and poor blood supply), Mean interval between the primary operation and the re-operation was 34 months (6 months-22 years). Reoperation methods were Soave's in 12, Duhamel's in 8, APSP (abdomino-posterosagittal pull-through procedure) in 5, and Swenson's in 1 case. In 2 cases of repeated rectoperineal fistula or rectourethral fistula, re-APSP were performed 3 times, respectively. A total of 29 re-pull-through operations were performed. Postoperative complications were wound infection (n=1), adhesive ileus (n=1), rectoperineal fistula (n=3), rectourethral fistula (n=2), and death due to pulmonary embolism (n=1). Mean follow up period of reoperation was 78 months (1 month-23years). In current state, 2 patients have an ileostomy because of repeated rectoperineal fistula and rectourethral fistula. Of the remaining 23 patients, 21(91 %) are totally continent with or without minimal soiling. Reoperation for Hirschsprung's disease was effective and safe for the patients complicated to the initial pull-through operation.

• 대한치과교정학회지
• /
• 제34권2호
• /
• pp.121-129
• /
• 2004

이 연구의 목적은 세 가지 형태의 헤드기어를 이용하여 상악 제1대구치의 후방이동 시 치아 주위 조직에 나타나는 응력분포를 광탄성법을 이용하여 관찰하는 것이다. 광탄성 상악모형에 장착한 헤드기어에 high-pull, straight-pull, cervical-pull의 세 가지 방향에서, face bow의 inner bow와 outer bow를 평행하게 한 상태에서 outer bow의 길이를 세 가지로 다르게 하여 적용시킨 다음 원편광기를 이용하여 응력분포를 분석하였다. 사진기를 이용하여 응력분포를 기록하고, 등색선상의 무늬차수를 이용, 응력분포를 분석하여 이차원적인 광탄성 응력분석을 시행하였다. 그 결과는 다음과 같다. 1. high-pull 헤드기어의 경우, 중간 길이의 outer bow일 때 치체이동에 유리한 응력 분포가 나타났다 2. straight-pull 헤드기어의 경우, 긴 길이의 outer bow일 때 좀더 치체이동에 유리한 응력 분포가 나타났으나, outer bow의 길이에 따른 응력분포의 변화는 적었다. 3. cervical-pull 헤드기어의 경우, 긴 길이의 outer bow일 때 치체이동에 유리한 응력 분포가 나타났다. 임상에서 헤드기어를 이용하여 상악 제1대구치를 후방으로 치체이동시키기 위해서는 facebow outer bow의 높이를 조정하지 않는 경우에는 high-pull 헤드기어에서는 outer bow와 inner bow를 같은 길이로, straight-pull 및 cervical-pull 헤드기어에서는 outer bow를 더 길게 하여 사용하는 것이 추천된다.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• Journal of Welding and Joining
• /
• 제26권1호
• /
• pp.56-62
• /
• 2008

In this paper, elastic and plastic adhesion index was very important in deciding adhesive characteristics and varying elastic and plastic index, dimensionless load and pull-off force were analyzed and simulated. Finally, using AFM, experimental surface roughness parameters of substrates and pull-off force between tip and substrates were produced. Using these values, pull-off forces were calculated and were compared with experimental pull-off forces. Through simulation and experiment, it was found that interaction of asperity also had very important influence on adhesive contact.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.1-6
• /
• 2011

N-channel 산화물 박막 트랜지스터(Thin Film Transistor, 이하 TFT)만을 이용한 저소비전력 inverter, NAND, NOR의 논리 게이트 회로를 제안한다. 제안된 회로는 asymmetric feed-through와 bootstrapping을 이용해서 pull-up, pull-down 스위치가 동시에 켜지지 않도록 설계하였다. 그 결과로 출력신호 전압 범위가 입력신호 전압과 동일하고 정전류가 흐르지 않는다. 인버터는 5 개의 TFT와 2 개의 capacitor로, NAND 및 NOR 게이트는 각각 10 개의 TFT와 4 개의 capacitor로 구성된다. 산화물 TFT 모델을 사용하여 SPICE 시뮬레이션을 수행하여 제안된 회로의 동작을 성공적으로 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.63-69
• /
• 2017

In this paper, composite laminate pull-through resistance was analyzed using the FEM method and compared with test results. 2D and 3D simplified FEM models, a nonlinear analysis, and a progressive failure analysis utilizing three composite laminate failure theories Maximum Stress, Maximum Strain, and Tsai-Wu were used to predict the FEM results with the test results. The load and boundary conditions of the test were applied to the FEM to simulate the test. A composite laminate pull-through test (ASTM D7332 Proc. B) was designed with a special fixture to collect more precise data. The test results were compared with the FEM analysis results.

• Advances in pediatric surgery
• /
• 제19권2호
• /
• pp.156-161
• /
• 2013

Congenital segmental dilatation of the colon is a very rare entity of unknown etiology, characterized by a localized dilatation of a bowel segment of the colon of variable length and an abrupt transition between the normal and dilated intestine. It can affect any part of the colon, with the rectosigmoid colon being the most commonly affected site. The clinical and radiological features may resemble that of Hirschsprung disease, but differ in that the normal ganglion cells are found in the dilated and normal segment of the colon. We performed laparoscopic-assisted transanal endorectal pull-through for segmental dilatation of rectosigmoid colon in an 8-year-old boy with chronic constipation since the age of 5 months.

• 한국식생활문화학회지
• /
• 제24권4호
• /
• pp.401-412
• /
• 2009

The aims of study were to provide basic data for the internationalization of Contract Foodservice Management Companies (CFMC) and to gain a better understanding of internal push-and-pull factors through in-depth interviews. The interviewees were managers of four large CFMCs and one small-to-medium CFMC. The non-structured interview format employed an interview guide of open-ended questions. All interviews were digitally recorded and notes were taken simultaneously by an interview assistant. The narrative data analysis involved transcription, coding, classification by categories, and content analysis. Eighty-eight codes were generated from the interview analyses, and the subordinate variables uncovered included seven push factors, eight pull factors, one interactive factor, and 10 internal dynamics. These factors will be useful in further studies of the internal operations of specific CFMCs, and more generally, the practical condition of the industry.