• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.133-133
• /
• 2002

• 터널과지하공간
• /
• 제21권5호
• /
• pp.377-385
• /
• 2011

본 연구는 록볼트가 크게 인장되더라도 주입재의 인장파괴를 최소화하여 전면접착식 볼트의 지보효과를 극대화 할 수 있는 새로운 개념의 록볼트를 개발하기 위해 수행하였다. 전면접착식 볼트의 거동 메커니즘을 분석하기 위하여 실내모형시험을 실시하였다. 압축성 간격재를 설치한 록볼트를 고안하고, 실내인발시험을 실시하여 간격재의 최적설치간격을 결정하였으며, 실대형 인발시험을 통하여 압축성 간격재를 설치한 볼트의 인발저항력을 측정하였다. 그 결과 압축성 간격재를 설치한 볼트가 기존의 전면 접착식 볼트보다 약 15% 증가된 인발 저항력을 나타내었다.

• 산업융합연구
• /
• 제20권12호
• /
• pp.11-25
• /
• 2022

본 연구에서는 블록체인이 적용된 공급망관리 정보시스템으로 전환의도에 영향을 미치는 요인을 검증하고자한다. 이를 위해 선행연구의 고찰을 통해 변수 선정 및 연구모형을 구성하고, TOE 프레임워크와 PPM 모델을 활용해 실증분석을 시행하였다. Push 요인, Pull 요인이 블록체인 시스템 전환의도에 미치는 영향 및 Mooring 요인인 전환비용을 통한 조절효과를 검증하였다. 국내에 소재한 중소기업을 대상으로 설문을 하여 320개 응답 자료를 표본으로 구조방정식 모형을 사용해 가설을 검증하였다. 연구 결과 Push 요인인 사회적 영향과 Pull 요인인 경영진의 혁신의지가 전환의도에 유의미한 영향을 미쳤다. 그리고 전환비용 인식 수준이 높고 낮은 집단 간 조절효과를 확인하였다. 본 연구는 블록체인 기반 공급망관리 정보시스템의 구현을 통한 기업의 경쟁력을 제고시킬 수 있는 SCBM(supply chain & blockchain management)의 개념 및 연구 방향을 제시하였다는 점에 의의가 있다.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.1-5
• /
• 2004

This study discusses frequency analysis based on autoregressive (AR) time series model, and the characterization of surface quality in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlations between the fiber pull-out and AR model coefficients are then established.

• BMB Reports
• /
• 제38권4호
• /
• pp.373-380
• /
• 2005

For measles viruses, fusion on the cell membrane is an important initial step in the entry into the infected cells. The recent research indicated that hemagglutinin firstly leads the conformational changes in the fusion protein then co-mediates the membrane fusion. In the work, we use the co-immunoprecipitation and pull-down techniques to identify the interactions among fusion protein, hemagglutinin and signaling lymphocyte activation molecule (SLAM), which reveal that the three proteins can form a functional complex to mediate the SLAM-dependent fusion. Moreover, under the confocal microscope, fusion protein and hemagglutinin protein can show the cocapping mediated by the SLAM. So fusion protein not only is involved in the fusion but also might directly interact with the SLAM to be a new fusion-trimer model, which might account for the infection mechanism of measles virus.

• 디지털산업정보학회논문지
• /
• 제19권1호
• /
• pp.57-76
• /
• 2023

This study analyzes the factors and effects on the users' intention to switch from contact center-oriented to AI chatbot-oriented customer services by combining Push-Pull-Mooring Model and provides insights for companies considering the adoption of AI chatbots. To test the model, we surveyed users with experience using chatbots at least once across different age groups. Finally, we analyzed 176 cases for the analysis using IBM SPSS Statistics and SmartPLS 4.0. The results of hypotheses testing rejected the hypotheses for variables of inconsistent quality and low availability of push factors and low switching cost of mooring factor while accepting the hypotheses for the tardy response of push factors and all pull factors. Therefore, these findings provide important implications for researchers and practitioners who wish to conduct research or adopt AI chatbots. In conclusion, users do not feel inconvenienced by the contact center-oriented service but also perceive high trust and convenience with AI chatbot-oriented service. However, despite low switching costs, users consider chatbots a complementary tool rather than an alternative. So, companies adopting AI chatbots should consider what features the users expect from AI chatbots and facilitate these features when implementing AI chatbots.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.269-281
• /
• 2014

This paper examines the suitability of using the Computational Fluid Dynamics (CFD) tools, ANSYS-CFX, as an initial analysis tool for predicting the drag and propulsion performance (thrust and torque) of a concept underwater vehicle design. In order to select an appropriate thruster that will achieve the required speed of the Underwater Disk Robot (UDR), the ANSYS-CFX tools were used to predict the drag force of the UDR. Vertical Planar Motion Mechanism (VPMM) test simulations (i.e. pure heaving and pure pitching motion) by CFD motion analysis were carried out with the CFD software. The CFD results reveal the distribution of hydrodynamic values (velocity, pressure, etc.) of the UDR for these motion studies. Finally, CFD bollard pull test simulations were performed and compared with the experimental bollard pull test results conducted in a model basin. The experimental results confirm the suitability of using the ANSYS-CFX tools for predicting the behavior of concept vehicles early on in their design process.

• Geomechanics and Engineering
• /
• 제22권3호
• /
• pp.265-275
• /
• 2020

As a flexible supporting structure, the anchoring frame structure is widely adopted to support multistage slopes in high earthquake-intensity area for its effectiveness and practicality. The previous study indicates that the anchor of anchoring frame structure is the most likely to be damaged during earthquakes. It is crucial to determine the pull-out capacity of anchor against seismic force for the seismic design of anchoring frame structure. In this study, an analytical model of a three-stage slope supported by anchoring frame structure is established, and the upper bound method of limit analysis is applied to deduce the seismic anchor force of anchoring frame structure. The pull-out capacity of anchor against seismic force of anchoring frame structure at each stage is obtained by computer programming. The proposed method is proved to be reasonable and effective compared with the existing published solution. Besides, the influence of main parameters on the pull-out capacity of anchor against seismic force is analyzed to provide some recommendations for the seismic design of anchoring frame structure.

• 한국재난정보학회 논문집
• /
• 제3권2호
• /
• pp.147-169
• /
• 2007

This study investigates the reinforcing effects of the Multi-bar Spring nails with respect to the conventional Soil-nails in artificial slopes. Based on wide experience related to design and construction, soil nails have been widely applied to reinforce slope in the world. Multi-bar spring nails are one of the improved soil nailing methods. These method maximizes bending, shearing, pull-out resistance for those multi-nails, not unit nail, that are inserted in the borehole using special spacer at regular intervals. In addition, because cutting plane is confined effect resulting from a pressured plate at the end of the nails with compression spring equipment, slope stability is secured using MS-nailing method. Analyzing bending, pull-out, shearing condition of MS-nail, it was examined throughly elastic region, load transfer capacity, reinforcing effect on cutting plate of MS-nails. In addition, Pilot and laboratory tests, numerical analysis were carried out to verify the superiority of MS-nailing method. In case, MS nailing method is applied to reinforce artificial slope, it was analyzed that bending, pull-out, shearing resistance was increased more than existing nailing method was applied. In this study, it was shown that surface failure was more or less prevented using MS-nailing method, confining effect on cutting plane using spring stuck to flexible equipment.

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.153-159
• /
• 2011

The purpose of this study was to develop an innovative training model and method to improve the posture and motion, while pulling up during weight lifting by evaluating the problems of Korean weight lifters performing this motion. To investigate the effectiveness of the new training method substitute members of the Korean national weight lifting team performed both the original pull up technique and new pulling training technique while kinetics and kinematics were recorded. For this study, the first phase of the new training method is more appropriate than the original training with the pull up drop slow deadlift to the knee joint. For the second phase, the new training motion is deemed to be more effective than the current box deadlift motion. Also, this new motion corrects the posture as there is more anterior hip joint motion(about 10 cm) and the knee flexes to about 120 degrees. For the third phase, starting about 10cm above the knee the box snatch high pull up is identified as a more suitable training method. For the forth phase, the box top snatch method is judged to be a more effective training method than the original top snatch training method.