• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.900-902
• /
• 2000

A moving-coil-type linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The inductance of moving coil and the push/pull effect is obtained from the permeance model of LOA with the open magnetic circuit. The analytical method are verified using the 2D finite element method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.145-148
• /
• 2003

본 논문은 단일 VOD 환경에서의 서버/클라이언트 간 데이터 서비스 모델을 분석하고 이를 병렬 VOD 환경에 적용함으로써 보다 나은 사용자 QoS(Quality of Service)를 제공하고자 한다. 이를 위해 단일 VOD 환경에서는 클라이언트가 데이터를 요청하고 서버가 전달해주는 Client Pull 모델과 서버 측에서 일방적으로 데이터를 전달해주는 Server Push 모델을 네트워크상 전달지연 측면에서 분석하고 위 두 모델.을 통합한 IPP(Interleaving Pull & Push) 서비스 모델과 Client Pull 모델을 전달지연과 클라이언트 버퍼 내 데이터 잔여량 측면에서 병렬 VOD 환경에서 적용 및 비교하였다. 시뮬레이션을 통해 병렬 VOD 환경에서 IPP 서비스 모델이 가장 적은 전달지연과 보다 안정적인 클라이언트 버퍼를 유지함을 알 수 있으며 이를 동해 사용자에게 보다 나은 서비스를 제공할 수 있다.

• Computers and Concrete
• /
• v.23 no.3
• /
• pp.155-160
• /
• 2019

The use of recycled aggregate concrete for the purpose of environmental and resource conservation has gained increasing interest in construction engineering. Nevertheless, few studies have reported on the bonding performance of the bars in recycled aggregate concrete after exposed to high temperatures. In this paper, 72 pull-out specimens and 36 cubic specimens with different recycled coarse aggregate content (i.e., 0%, 50%,100%) were cast to evaluate the bond behavior between recycled aggregate concrete and steel bar after various temperatures ($20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$). The results show that the recycled aggregate concrete pull-out specimens exhibited similar bond stress-slip curves at both ambient and high temperature. The bond strength declined gradually with the increase of the temperature. On the basis of a regression analysis of the experimental data, a revised bond strength mode and peak slip ratios relationship model were proposed to predict the post-heating bond-slip behavior between recycled aggregate concrete and steel bar.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.1-6
• /
• 2011

Low-power logic gates, i.e. inverter, NAND, and NOR, are proposed employing only n-channel oxide thin film transistors (TFTs). The proposed circuits were designed to prevent the pull-up and pull-down switches from being turned on simultaneously by using asymmetric feed-through and bootstrapping, thereby exhibited same output voltage swing as the input signal and no static current. The inverter is composed of 5 TFTs and 2 capacitors. The NAND and the NOR gates consist of 10 TFTs and 4 capacitors respectively. The operations of the logic gates were confirmed successfully by SPICE simulation using oxide TFT model.

• The Journal of Information Systems
• /
• v.27 no.2
• /
• pp.221-245
• /
• 2018

Purpose This study aims to investigate the factors that influence switching intention of Smart Appliances. We focuses on Push-Pull-Mooring theory and status quo bias as factors related to switching behavior. Design/methodology/approach This study developed an model to explain the switching intention of Smart Appliances and conducted structural equation modeling with AMOS22.0. To test the proposed hypotheses, we collected 319 survey responses from smart appliances's users. Findings The results indicated that low usefulness and low ease of use had an effect on the switching intention of smart appliances. The results also indicated that attractiveness of the alternative and social norms had an effect on the switching intention of smart appliances. Lastly, The difference between the relation of push effect and switching intention and the relation of pull effect and switching intention was found to be due to the level of status quo bias. The academic and managerial implications were discussed based on the results of empirical analysis.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.718-727
• /
• 2002

In this work, an Ar+ beam was irradiated on carbon fiber surfaces to improve the interfacial shear strength (IFSS) of the resulting composites using an ion assisted reaction (IAR) method h single fiber pull-out test was executed to investigate the basic characteristics of the single Carbon fiber/matrix interface. Based on Greszczuk's geometrical model, the debonding force for pull-out of the fiber from the resins was discussed with the applied ion beam energy as a result, it was known that an ion beam treatment produced the functional groups on fiber surface and etching lines along the fiber axis direction, resulting in increasing the adhesion forces between fibers and matrix, which caused the improvement of the IFSS in a composite system. And, it was also found that the maximum IFSS was shown at 0.8 keV ion beam energy in this system.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.473-479
• /
• 2008

Recently the trade patterns of the entire economy are rapidly changing on development of IT. The field of port logistics is enforcing a competitiveness through preliminary offer of information and a batch process for improving the structure of logistics management which is apparently high cost and the low efficiency since 1990. But a previous EDI is insufficient in process ability. Bemuse it costs for the purchasing and maintenance of the expensive communication devices which is operated on the VAN environment. A web based EDI operating on an open network environment is needed to improve these problems and to handle transaction efficiently among many and unauthorized personals. Therefore, this study is willing to present a new web based model of the pull process which extracts the data when the receiver is needed to improve the push process which is transmitting data unilaterally.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.92-99
• /
• 2021

Agricultural tractors drive and operate both off-road and on-road. Tire-road interaction significantly affects the tractive performance of a tractor, which is difficult to predict numerically. Many empirical models have been developed to predict the tractive performance of tractors using the cone index, which can be measured through simple tests. However, a magic formula model that can determine the tractive performance without a cone index can be used instead of traditional empirical models as the cone index cannot be measured on asphalt roads. The aim of this study was to predict the tractive performance of a tractor using the magic formula tire model. The traction force of the tires on an asphalt road was measured using an agricultural tractor. The dynamic wheel load was calculated to derive the coefficients of the traction-slip curve using the measured static wheel load and drawbar pull of the tractor. Curve fitting was performed to fit the experimental data using the magic formula. The parameters of the magic formula tire model were well identified, and the model successfully determined the coefficient of traction of the tractor.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.485-493
• /
• 2010

GFRP rebar with ribs resemble those of deformed steel rebar was developed in 2005. It was reported that ribs of the GFRP rebar were sheared off due to the lower shear strength of polymer. In this study, the basic development length of the GFRP rebar was investigated through pull-out tests, models specified in ACI440.1R-03 and -06, and empirical model derived by Cosenza et al. (2002). As a results of pull-out tests, the critical embeddment length, which is defined as the length when failure mode is changed from pull-out to bar fracture, was 20 times of bar diameter for GFRP rebar and was 15 times for steel rebar. It is believed that the basic development of the GFRP rebar is 21 times of bar diameter, which is determined from the application of average bond strength into the model equation specified in ACI440.1R-03. Compared to the model equation in ACI440.1R-06, that in ACI440.1R-03 is recommendable for design purpose. The Cosenza et al.'s model underestimates the basic development length of the GFRP rebar.

• Information Systems Review
• /
• v.16 no.3
• /
• pp.135-160
• /
• 2014

Most Social Network Service (SNS) provide online chat, video and file sharing, blogging and others. Because of this advantage, people depend on SNS to communicate with others. However, recently SNS encourage people to reveal too much information broadly so SNS users are concerned about privacy invasion and data spill. They also feel fatigue in process of touching people they don't know while using SNSs. That is the reason why they attempt to switch from opened SNS to Closed SNS. Therefore, the purpose of this study is to empirically investigate and analyze the effect of the factors on the SNS users' switching behavior when using SNS. To accomplish this purpose, this research adopted "Push-Pull-Mooring (PPM)" framework. The PPM is proposed by population geologist, who used it to explain the incentives of demographic migration. Following PPM model, this research empirically examines the three categories of antecedents for SNS switching intention toward closed SNS: push (i.e., weak connection, privacy concern, relative complexity), pull (i.e., enjoyment, belongingness, peer influence), mooring (i.e., SNS fatigue, user resistance) factors. The survey was conducted for 285 users on SNS communities in Korea. The results of this study are as follows; First, wear connection and privacy concern are significantly related to SNS switching intention. Second, enjoyment and belongingness are significantly related to SNS switching intention. Finally, the results show that SNS fatigue has a moderating effect on the links between push factors and SNS switching Intention. Also, user resistance has a moderating effect on the links between pull factors and SNS switching Intention. These findings contribute to the SNS literature both theoretically and practically.