• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.1 s.94
• /
• pp.29-38
• /
• 2005

The track pull-in behavior analysis in an optical disk drive (ODD) using plane phase and the evaluations for effecting parameters of it are discussed. Track pull-in, track capture procedure to do track following control, is a key factor to increase data transfer rate. First, the relative velocity between the beam spot of an optical pick-up and the target track of an optical disk is analyzed during the track pull-in procedure. In this process, it is showed that the track error signal has nonlinear characteristics which are depending on the time. Second, Runge-Kutta method to solve the nonlinear equation is applied to find the track pull-in behavior, and some optimal parameters to get stable and fast pull-in condition are obtained. Then, the phase plane analysis for track pull-in procedure is presented. Finally, some comments for the simulated results are discussed briefly.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.598-603
• /
• 2020

In this paper present a Low Drop-Out(LDO) regulator that improves load transient characteristics due to the push-pull pass transistor structure is proposed. Improved load over the existing LDO regulator by improving the overshoot and undershoot entering the voltage line by adding the proposed push-pull circuit between the output stage of the error amplifier inside the LDO regulator and the gate stage of the pass transistor and the push-pull circuit at the output stage. It has a delta voltage value of transient characteristics. The proposed LDO structure was analyzed in Samsung 0.13um process using Cadence's Virtuoso, Spectre simulator.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.426-433
• /
• 2010

This study was conducted to develop a pull-type sprayer which performs the safe spraying with improved ergonomic postures while pesticide spraying of roses in floricultural facilities. The performance of the ergonomically designed sprayer was analyzed with a comparison of a conventional spray method. The pull-type sprayer, consisting of power pump, hose and nozzle parts was designed to manually pull and spray to upward and horizontal directions. From the analysis of postures with the RULA method, the labor load to arm and wrist using the pull-type sprayer was less than that with conventional power sprayer, so that the intensity of labor reduces. Working capacity with pull-type sprayer was two-fold greater than the conventional power sprayer. After performing pesticide spraying with the pull-type sprayer, the operating cost was reduced to \585,000/yr, which is 79% less than that of cost (\2,197,500/yr) for using conventional power sprayer.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.34-40
• /
• 2005

There have been numerous approaches to examine the bonding strengths of solder joints. However, despite the technical and practical limitations, the precedent test methods such as the ball shear and ball pull tests are being used in industrial applications. In this study, the optimum jaw pressure with the modified protrusion jaw was introduced in order to obtain higher successful rate f3r ball pull testing. Furthermore, the pull strengths and fracture modes of Sn-8Zn-3Bi, Sn-4Ag-0.7Cu, and Sn-37Pb eutectic solder after isothermal aging tests ($100^{\circ}C,\;150^{\circ}C$), were evaluated with the protrusion jaw. The pull strength-displacement hysteresis curves and fracture surfaces were carefully investigated to evaluate the correlation between the pull strengths and the fracture modes of each solder. In conclusion, it is verified that Au-Zn IMCs (Intermetallic Compounds) have a detrimental effect on the pull strengths and changed fracture modes of Sn-8Zn-3Bi solder. Meanwhile, the microstructure transformation influences the degradation of pull strengths of Sn-4Ag-0.7Cu and Sn-37Pb solders.

• Clinics in Shoulder and Elbow
• /
• v.25 no.1
• /
• pp.15-21
• /
• 2022

Background: This study was performed to identify the incidence of screw in-type lateral anchor pull-out in patients older than 60 years who underwent rotator cuff repair for large to massive rotator cuff tear (RCT). Methods: We reviewed 25 patients over 60 who were diagnosed with large to massive RCT and underwent arthroscopic rotator cuff repair in our hospital from March 2017 to February 2021. Preoperative tear size (anterior to posterior, medial to lateral) was measured via preoperative magnetic resonance imaging (MRI). All 25 patients underwent MRI scanning on postoperative day 1 and at 3 months after surgery. The change of anchor position was measured in axial views on MRI images postoperative day 1 and 3 months after surgery. And it was statistically compared according to bone mineral density (BMD), sex, and number of lateral anchors. Results: Two MRIs (postoperative day 1 and 3 months) in 25 patients were compared. Anchor pull-out occurred in six patients during 3 months (6.7%), and the mean pull-out length difference was 1.56 mm (range, 0.16-2.58 mm). There was no significant difference in the number of pull-out anchors, degree of pull-out difference by comparing BMD (A, BMD≤-2.5; B, BMD>-2.5), sex, or number of anchors used in each surgery (C, two anchors; D, three anchors) (p>0.05). Conclusions: Pull-out of screw in-type anchors was rarely observed and the mean pull-out length difference was negligibly small in our study. The screw in-type lateral anchor seems to be a decent option without concern of anchor pull-out even in elderly patients.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.555-567
• /
• 1994

The purpose of this study is to observe the effect of high pull headgear on the craniofacial structures of mixed dentition with Class II malocclusion. The cephalometric headplates of 16 children treated by high pull headgeaar during 6 months and 18 children during 12 months were traced, digitized and statistically analyzed. The results were as follows. 1. Inhibition of foreward growth of maxilla was observed in both group. 2. Clockwise rotation of maxilla was observed in both group. 3. There were distal movement of maxillary 1st molar and inhibition of alveolar bone growth of maxilla. 4. There was compensatory extrusion on mandibular 1st molar. 5. The ratio of anterior facial height to posterior facial height was almostly not changed. In the treatment plan of C II malocclusion by high pull headgear, ire must prevent the mandibulasr 1st molar from extruding and for orthopedic effect, at least 6 months is needed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.556-559
• /
• 2003

This paper presents a study on pull cord switch system which is employed in various industry for emergency stop of the equipments. In this paper, a new method for operation position detection of pull cord switch is suggested which is based on sensing operation position by detecting input resistance variation due to switching operation of pull cord switches with respective ohmic resisters. Moreover, this paper proposes a resistor circuit structure in order to improve recognition rates. Finally, this paper treats a system where such operating switches can be read by PLC.

• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.121-143
• /
• 1993

Traditional Manufacturing method is push system by plan made in advance and Japanese manufacturing method represented by JUST-IN-TIME is pull system which respond's to the demand flexibly. Both have their pros and cons. In general, it is well understood that push system is faster than pull system in the sense of manufacturing speed. However, pull system such as JIT excelles dramatically in the sense of work in process. Therefore, this paper is trying to put together to get alternative which has the advantage of both system. The objective of the paper is to enhance the effect of built-in manufacturing system without paying extra cost by way of introducing the alternative of the pull-push manufacturing strategic operational method.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.1
• /
• pp.69-84
• /
• 2017

This paper presents results of an experimental investigation on the behaviour of bond between external glass fibre reinforced polymer reinforcement and concrete exposed to three different environmental conditions, namely, temperature cycles, wet-dry cycles and outdoor environment separately for extended durations. Single shear tests (pull-out test) were conducted to investigate bond strengths (pull-out strengths) of control (unexposed) and exposed specimens. Effect of the exposure conditions on the compressive strength of concrete were also investigated separately to understand the effect of changing concrete compressive strength on the pull-out strength. Based on the comparison of experimental results of exposed specimens to control specimens in terms of bond strengths, failure modes and strain profiles, the most significant degradation of pull-out strength was observed in specimens exposed to outdoor environment, whereas temperature cycles did not cause any deterioration of strength.

• The Journal of Information Systems
• /
• v.30 no.4
• /
• pp.71-94
• /
• 2021

Purpose The purpose of this study is to verify impacts of factors, representing Push-Pull-Mooring(PPM) on switch intention to OTT(Over-The-Top) service in demand for content and to find relationship between factors through empirical analysis. Design/methodology/approach This study designed a research model by deriving factors affecting the intention to switch on OTT service based on the Push-Pull-Mooring framework and researches on OTT service. To test the hypothesis, a total of 357 responses were collected from individuals with experience in using OTT service and analyzed using SPSS26 and SmartPLS3.0. Findings According to the empirical analysis result, this study confirmed that the push, pull, and mooring factors proposed in this study had a significant effect on switching intention on OTT service. In addition, this study confirmed that both low switching cost and need for variety had a significant effect except for hypothesis H8.