• Journal of Ginseng Research
• /
• v.31 no.3
• /
• pp.147-153
• /
• 2007

Effect of puffing treatment on saponins, total sugars, acidic polysaccharide, phenolic compounds, microstructure and pepsin digestibility of dried red ginseng tail root were tested. Puffing samples of dried red ginsneng tail root were pre-pared at 20rpm, 15 $kg/cm^2$, $120{\sim}150^{\circ}C$, and for 30 min by a rotary type apparatus of 5 L capacity. Crude saponin content of puffing red ginseng tail root was increased 26.5% compared to non-puffing, especially $Rg_3$ content was increased from 0.49 mg/g to 0.72 mg/g. Total sugar content was not changed, but acidic polysaccharide content was slightly decreased from 7.15% to 6.44% by puffing treatment. Total phenolic compounds was increased from 7.86% to 9.94% by puffing. In terms of individual phenolic compounds, salicylic acid was quantified in puffing tail root, but gentisic acid was quantified in non-puffing. Syringic acid was the most predominant phenolic acid, increased to about 6 times by puffing treatment. On the other hand, gallic acid, p-coumaric acid, caffeic acid and ferulic acid were highly decreased. Microstructure of cross-section in puffing tail root was shown to more uniform shape compared to non-puffing. Pepsin digestibilities of puffing and non puffing red ginseng tail root were 22.4% and 46.2%, respectively (p<0.05). The results indicated that puffing treatment might be useful increasing the bioactive components, preference and digestibility.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.5
• /
• pp.423-429
• /
• 2001

Process optimization of milling and puffing condition of the typical varieties of wheat such as HRS, ASW, and SW were studied. Distibution of optimal milling size of 8 mesh-on was more than 90% after milling of three wheats. That of HRS was the highest, 78%, and that of SW and ASW were pretty high, above 75%. Moisture content of three wheats was between 10∼12%, and protein content which are important for texture profile and puffing was 12.68%, 13.59%, and 11.82% for SW, HRS, and ASW, respectively. Puffing was optimal of 7 kg/$\textrm{cm}^2$ heating pressure for SW, and 5 kg/$\textrm{cm}^2$ lot HRS and ASW when the puffing process was pursued at 14.5 ∼15.0 kg/$\textrm{cm}^2$ steam pressure. Moisture content decreased from 11∼l3% to 5.6∼6.0% after puffing. Bulk density of SW, HRS, and ASW was 0.0441, 0.0523, and 0.0460, respectively. Size distribution of HRS was 82.4% after Puffing. Press strength of HRS was high, 51.0%, and texture of HRS was crispy.

• Journal of Ginseng Research
• /
• v.34 no.1
• /
• pp.59-67
• /
• 2010

Response surface methodology was used to predict the optimum conditions of explosive puffing process for ginseng. A central composite design was used to monitor the effect of moisture content and puffing pressure on dependent variables such as functional compounds (extract yield, crude saponin, acidic polysaccharide, and total phenolic content) and sensory properties. Correlation coefficients $(R^2)$ of models for crude saponin, acidic polysaccharide, and total phenolic content were 0.9176 (p<0.05), 0.9494 (p<0.05), and 0.9878 (p<0.001), respectively. Functional compounds increased with decreasing moisture content and increasing puffing pressure. Overall palatability was high at 15-20% moisture content and 98-294 kPa of puffing pressure. On the basis of superimposed contour maps for functional compounds and overall palatability of puffed ginseng, the optimum ranges of puffing conditions were 10-17% moisture content and 294-392 kPa puffing pressure.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.193-201
• /
• 2010

The aim of this study was to analyse the quality of Yukwa puffed by using a vacuum puffing machine and compare to deep-fried Yukwa. The effect of vacuum puffing condition including heating temperature(100-${160^{\circ}C}$), preheating time(0-8 min) and vacuum puffing time(5-20 min) on physical and microstructure characteristics of the Yukwa was investigated. Vacuum puffed Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 10 min puffing time had highest value in volumetric expansion ratio(10.04) and lowest value in bulk density(0.15 g/$cm^{3}$). The breaking strength showed the lowest value of 140 g/$cm^{3}$ in vacuum puffing Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time. The Yukwa puffed with the vacuum puffing machine at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time had the higher value of bulk density and the lower value of volumetric expansion ratio than those of deep-fried Yukwa. Increasing preheating time and vacuum puffing time caused an increase in white and an decrease in yellowness. The vacuum-puffed Yukwa exhibited smaller and uniform cell structure, while deep-fried Yukwa exhibited apparently in larger pores inside and smaller pores near the surface layer. The optimum condition of vacuum puffing machine for the production of vacuum-puffing Yukwa was ${120^{\circ}C}$ heating temperature, 4 min preheating time and 5 min puffing time.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.2
• /
• pp.222-229
• /
• 2019

Korean ginseng (Panax ginseng Meyer) was processed by drying, steaming, or puffing, and the effects of these processes on the ginsenoside profile were investigated. The main root of 4-year-old raw Korean ginseng was dried to produce white ginseng. Steaming, followed by drying, was employed to produce red or black ginseng. In addition, these three varieties of processed ginseng were puffed using a rotational puffing gun. Puffed ginseng showed significantly higher extraction yields of ginsenosides (49.87-58.60 g solid extract/100 g of sample) and crude saponin content (59.40-63.87 mg saponin/g of dried ginseng) than non-puffed ginseng, respectively. Moreover, puffing effectively transformed the major ginsenosides (Rb1, Rb2, Rc, Rd, Re, and Rg1) of ginseng into minor ones (F2, Rg3, Rk1, and Rg5), comparable to the steaming process effect on the levels of the transformed ginsenosides. However, steaming takes much longer (4 to 36 days) than puffing (less than 30 min) for ginsenoside transformation. Consequently, puffing may be an effective and economical technique for enhancing the extraction yield and levels of minor ginsenosides responsible for the major biological activities of ginseng.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.355-361
• /
• 2009

In this study, raw ginseng produced by different methods was puffed, and physicochemical properties were analyzed and compared. Raw ginseng included white ginseng lateral root (WGL), red ginseng lateral root (RGL), red ginseng main root (RGM), and red ginseng main root with 15% (w/w) moisture (RGMM). All samples were puffed at a pressure of 7 kg/cm2. Crude saponin content was increased after puffing compared with that of control ginseng. RGM and RGMM showed significant increases in crude saponin content, from 1.67% and 1.41% to 2.84% and 3.09% (all w/w), respectively. However, the ginsenoside content of WGL was decreased after puffing. Rg3, Rh1, and Rh2 values of red ginseng were increased by puffing compared with those of control red ginseng. The total sugar content of ginseng decreased after puffing. The mineral components of puffed ginseng were similar to those of raw ginseng. Levels of total phenolic compounds and antioxidant activities of ginseng were increased after puffing, and electron-donating ability was greatly increased. The acidic polysaccharide content of ginseng increased slightly and the amino acid content decreased due to the high temperature used during puffing.

• Journal of Ginseng Research
• /
• v.32 no.4
• /
• pp.311-314
• /
• 2008

This study evaluated changes in concentrations of volatile compounds contained in red ginseng tail roots through puffing treatment. The results showed that 59 out of 63 volatile compounds were detected from the puffing treated roots. While most terpene and furan compounds seem to be increased by puffing treatment, most alcoholic, aldehyde and acid compounds seem to be decreased, and terpene compounds content accounted for 70% of the 63 volatile components in the puffed red ginseng tail roots.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.12
• /
• pp.679-684
• /
• 2000

Closing switch, key component of pulsed power system, is constructed simply and used frequently due to the easy control and manufacture of one. The kind of one are spark-gap, triggered vacuum switch, pseudo-spark switch and INPIStron. But the electrode of spark gap switch is damaged with the hot spot by Z-pinch and then the life of one become short. INPIStron with inverse pinch effect has long life but it is difficult trigger system to provide uniform discharge between cathode and anode. In this paper, the design and manufacturing of INPIStron with gas puffing trigger method in order to supply uniform discharge inter-electrode and the performance of the developed INPIStron applied to 500[kA]-2[MJ] pulsed power system is presented.

• Natural Product Sciences
• /
• v.28 no.2
• /
• pp.89-92
• /
• 2022

In Asia, the roots of Paeonia lactiflora and Astragalus membranaceus have been used as therapeutic agents for thousands of years. Once the medicinal plants are harvested, they are dried and their ingredients are extracted by heat-mediated reflux extraction. However, the condensed structure of organic products (especially roots) limits the extraction of bioactive components. In this study, we assessed the effect of the puffing method (using high temperature and pressure) before the extraction process in relation to the profile and antioxidant capacity of active ingredients. We demonstrated that the additional puffing process before extraction methods improves the yield of polyphenol concentrations and antioxidant activities from the roots of P. lactiflora and A. membranaceus.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.1
• /
• pp.75-79
• /
• 2014

The following study is the result of herbal teas puffed at different temperatures between $140{\sim}220^{\circ}C$. Depending on treatment temperatures, the water contents decreased, while some carbonization occurred and crude ash contents relatively increased. Also, the crude protein and crude fat experienced little changes. B(${\alpha}$)P contents (0.16~0.17 ppb) showed little change according to treatment temperatures. From this result, the B(${\alpha}$)P content differed depending on the treatment temperature and raw materials. Solid elution rate figures of the herbal teas ranged from 0.27~0.45% (w/w) and the rate of solid elution increased along with higher puffing temperatures. The reason for the increase in solid elution rates is due to the breakage of cross bridges between the raw materials in the herbal tea which are carbohydrates, proteins, lipids and etc. after treatments of physical changes rather than chemical ones.