• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.129-129
• /
• 2011

The limited understanding of the surface properties of $Pt_3Ni$ for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cell (PEMFC) has motivated the study of properties and electronic structures of seven layered $Pt_3Ni$ (001), (110), and (111) surfaces. The first principle method based on density functional theory (DFT) is carried out. It is found that the bulk $Pt_3Ni$ has a ferromagnetic ground state with the ordered fcc type L12 structure, which is in good agreement with other results. Non magnetic Pt has the induced magnetic moment due to the strong hybridization between 3d Ni and 5d Pt. The magnetic moment of Pt and Ni enhanced on the surface of each due to surface effect however the magnetic moment of surface Pt in the Pt-segregated Pt3Ni (111) decreased and the magnetic moment of Ni in Ni rich subsurface increased significantly. The calculated d band centers of Pt explain the possibilities for oxygen absorption and play the important roles in altering the catalytic properties. The spin polarized densities of states are presented in order to understand physical properties of Pt in different surfaces in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.02a
• /
• pp.67-68
• /
• 1996

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.221-234
• /
• 1996

Basic studies for the effective extraction of dibenzylammonium dibenzyldithiocarbamate(DBADBDC) complexes of Ag(I), Pd(II), Au(III) and Pt(IV) into chloroform have been conducted. The effects of pH on the extraction of ligand itself and metal cemplexes showed that DBADBDC itself was uniformly extracted in the pH range of 2~9 and metal complexes were effectively extracted at the pH range as follows. That is, Ag(I) : in an acidic aqua medium, Pd(II) : > 4, Au(III) : wide range, and Pt(IV) : > 3. The distribution ratio and extractabilities were obtained from the partition and extraction equilibria of metal-DBDC complexes between aqueous solution and chloroform. Ag(I) : log D=4.226 : E(%)=99.9% in the aqueous solution of pH 0, Pd(II) : log D=1.804 : E(%)=98.5% at pH 4~7, Au(III) : log D=3.755 : E(%)=99.9% at pH 2~10, and Pt(IV) : log D=0.165 : E(%)=57.2% at pH 8.0. And also mole ratio of metal ion to ligand in complexes were determined by mole ratio method : 1 : 1 for Ag(I) and 1 : 2 for Pd(II), Au(III) and Pt(IV). $Cl^-$ was included as a coordination species in complexes of Au(III) and Pt(IV). Besides, extraction mechanisms of compleses sere examined in the presence of chloride ion in an aquous solution, and extraction reactions and estraction constants could be proposed and calculated, respectively.

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.232-236
• /
• 2020

Three-dimensional (3D) multilayered Pt electrodes were fabricated to develop a porous electrode using a pattern-transfer printing process. The Pt thin films were deposited using a transferred sputtering pattern having a 250 nm line width on the substrate, and the uniform line patterns were efficiently transferred using our proposed method. Temperature-programmed desorption (TPD) analyses were used to evaluate the porosity of the electrodes. It was possible to distinguish between two resolved maxima at 168 and 227 ℃, which could be described in terms of desorption reactions on the Pt (111) planes. The results of the TPD analysis of the 3D and multilayered Pt electrodes prepared through transfer printing were compared to those of an electrode fabricated through screen printing using a commercial Pt-carbon paste commonly used as porous electrodes. It was confirmed that the 3D multilayered electrodes exhibited a desorption concentration approximately 100 times higher than that of the Pt-carbon composite electrode, and the desorption concentration increased by approximately 0.02 mg/mol per layer. The 3D multilayered electrode effectively functions as a porous electrode and a catalyst.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.290-298
• /
• 2018

In order to investigate the effect of thickness on the dielectric and piezoelectric properties of (001) PMN-29PT single crystals, three different types of PMN-29PT samples were prepared using the solid-state single crystal growth (SSCG) method: high density crystal [99%], low density crystal [95%], and high density crystal doped with Mn [98.5%]. When their thickness decreased from 0.5 mm to 0.05 mm, their dielectric constant ($K_3{^T}$), piezoelectric constants ($d_{33}$ and $g_{33}$), and electromechanical coupling factor ($k_t$) decreased continuously. However, their dielectric loss (tan ${\delta}$) increased. The addition of Mn to PMN-PT induced an internal bias electric field ($E_I$), increased the coercive electric field ($E_C$), and prevented local depoling. Therefore, Mn-doped PMN-PT crystals show high stability as well as high performance, even in the form of very thin plates (< 0.2 mm), and thus are suitable for application to high frequency composites, medical ultrasound probes, non-destructive testing devices (NDT), and flexible devices.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.412-416
• /
• 2013

FePt:Ag (100 nm) nanocomposite thin films were prepared on naturally-oxidized Si substrates by dc magnetron sputtering at room temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) are used to investigate the effects of annealing pressures on the ordering processes and microstructures of these films. The average sizes for the $L1_0$ ordered domains and the FePt grains are reduced to d = 9 nm and D = 13 nm from d = 19 nm and D = 34 nm, respectively, when the annealing pressure is enhanced to 0.6 GPa from room pressure at 873 K. Furthermore, the size distribution is improved into a narrow range. With increasing pressure, the coercivity of $L1_0$-FePt:Ag thin films decreases from 15.1 to 7.6 kOe. In the present study, the effects of high pressure on the $L1_0$ ordering processes and microstructures of FePt:Ag nanocomposite films were discussed.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.12
• /
• pp.2027-2032
• /
• 2005

This paper demonstrates details of thermal behavior of Langmuir-Blodgett (LB) film of poly(tert-butyl methacrylate) (PtBMA) by using the principal component analysis based two-dimensional correlation spectroscopy (PCA2D) through eigenvalue manipulating transformation (EMT). By uniformly lowering the power of a set of eigenvalues associated with the original data, the smaller eigenvalues becomes more prominent and the subtle contribution from minor components is now highlighted much more strongly than the original data. Thus, the subtle difference of thermal behavior of LB film of PtBMA from minor components, which is not readily detectable in the conventional 2D correlation analysis, is much more noticeable than the original data. PCA2D correlation spectra with EMT operation for the temperature-dependent IR spectra of LB film of PtBMA reveal the hidden property of phase transition processes during heating.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.233-240
• /
• 1994

We have investigated how the magneto-optical and recording properties of Pt/Co modulated films vary with sample preparation conditions : sputtering at various gas pressures, sputtering with Xe instead of Ar, and etching the buffer layers, etc. The magneto-optical characteristics of Pt/Co multilayers was comparable with those of currently prevailing rare-earth transition-metal alloys(Tb-Fe-Co amorphous films). On a disk of $12{\times}[Pt10.7\;{\AA}/Co2.8{\;}{\AA}]$ multilayer enhanced with 70nm silicon nitride, we have achieved a CNR of 36dB with a reading laser(${\lambda}\;=\;780nm$) power of 2.5-4.5mW for 720KHz carrier at 1.4m/s and the enhanced kerr rotation angle of $1.23^{\circ}$ at 780nm. It is suggested that Pt/Co modulated films clearly are very promising magneto-optical materials for a commercially use.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.717-722
• /
• 1993

Reactions of [PtCl$_4$]$^{2-}$ with excess of dithiocarbamates in water lead to facile replacement of the chloro ligand by dithiocarbamato ligand to give [Pt(A)], [Pt(B)$_2$]Cl$_2$, [Pt(C)$_2$], and [Pt(D)(CH$_2$=CH$_2$)Cl]Cl. The complexes of platinum have been characterized by elemental analyses, infrared and UV-visible spectra, and conductivity measurements. Platinum(II)-dithiocarbamate complexes were soluble in polar solvents such as water, alcohol, acetone, dimethylformamide, and dimethylsulfoxide etc. The possible structure was proposed on the basis of elemental analyses and physical properties.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.240-245
• /
• 2010

This work explored the catalytic effect of Pt in multi-wall carbon nanotube and poly-pyrrole conductive polymer electrocatalysts (Pt/PPy/MWCNT). A home-made Pt/PPy/MWCNT catalyst was first evaluated by comparing its electrochemical active surface area (ESA) with E-Tek commercial catalysts by cyclic voltammetry in $H_2SO_4$ solution. Then, the methanol oxidation currents of Pt/PPy/MWCNT and the hydrogen peaks in $H_2SO_4$ solution were serially measured with microporous electrode. This provided the current density of methanol oxidation based on the ESA, allowing a quantitative comparison of catalytic activity. The current densities were also measured for Pt/C catalysts of E-Tek and Tanaka Precious Metal Co. The current densities for the different catalysts were similar, implying that catalytic activity depended directly on the ESA rather than charge transfer or electronic conductivity.