• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.81-87
• /
• 2004

Semiconductor thick film gas sensors based on tin oxide are fabricated and their gas response characteristics are examined for four simulant gases of chemical warfare agent (CWA)s. The sensing materials are prepared in three different sets. 1) The Pt or Pd $(1,\;2,\;3\;wt.\%)$ as catalyst is impregnated in the base material of $SnO_2$ by impregnation method.2) $Al_2O_3\;(0,\;4,\;12,\;20\;wt.\%),\;In_2O_3\;(1,\;2,\;3\;wt.\%),\;WO_3\;(1,\;2,\;3\;wt.\%),\;TiO_2\;(3,\;5,\;10\;wt.\%)$ or $SiO_2\;(3,\;5,\;10\;wt.\%)$ is added to $SnO_2$ by physical ball milling process. 3) ZnO $(1,\;2,\;3,\;4,\;5\;wt.\%)$ or $ZrO_2\;(1,\;3,\;5\;wt.\%)$ is added to $SnO_2$ by co-precipitation method. Surface morphology, particle size, and specific surface area of fabricated sensing films are performed by the SEM, XRD and BET respectively. Response characteristics are examined for simulant gases with temperature in the range 200 to $400^{\circ}C$, with different gas concentrations. These sensors have high sensitivities more than $50\%$ at 500ppb concentration for test gases and also have shown good repetition tests. Four sensing materials are selected with good sensitivity and stability and are fabricated as a sensor array A sensor array Identities among the four simulant gases through the principal component analysis (PCA). High sensitivity is acquired by using the semiconductor thick film gas sensors and four CWA gases are classified by using a sensor array through PCA.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.159-165
• /
• 2016

The hydrogen has been recognized as a clean, nonpolluting and unlimited energy source that can solve fossil fuel depletion and environmental pollution problems at the same time. Water electrolysis has been the most attractive technology in a way to produce hydrogen because it does not emit any pollutants compared to other method such as natural gas steam reforming and coal gasification etc. In order to improve efficiency and durability of the water electrolysis, comprehensive studies for highly active and stable electrocatalysts have been performed. The platinum group metal (PGM; Pt, Ru, Pd, Rh, etc.) electrocatalysts indicated a higher activity and stability compared with other transition metals in harsh condition such as acid solution. It is necessary to develop inexpensive non-noble metal catalysts such as transition metal oxides because the PGM catalysts is expensive materials with insufficient it's reserves. The optimization of operating parameter and the components is also important factor to develop an efficient water electrolysis cell. In this study, we optimized the operating parameter and components such as the type of AEM and density of gas diffusion layer (GDL) and the temperature/concentration of the electrolyte solution for the anion exchange membrane water electrolysis cell (AEMWEC) with the transition metal oxide alloy anode and cathode electrocatalysts. The maximum current density was $345.8mA/cm^2$ with parameter and component optimization.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2012

This study was conducted to investigate changes in composition of ginsenosides and color of processed ginsengs prepared by different steaming-drying times. Processed ginsengs were prepared from white ginseng with skin by 9-time repeated steaming at $96^{\circ}C$ for 3 hours and followed by hot air-drying at $50^{\circ}C$ for 24 hours. As the times of steaming processes increased, lightness (L value) decreased and redness (a value) increased in color of ginseng powders. Crude saponin contents and ginsenosides compositions in processed ginsengs prepared by different steaming-drying times were investigated using the HPLC method, respecively. Crude saponin contents according to increasing steaming-drying times decreased in some degree. In the case of major ginsenosides, the contents of $Rb_1$, $Rb_2$, Rc, Rd, Rf, Re, $RG_1$, Re were decreased with increase in steamimg times, but those of $Rh_1$, $Rg_3$, $Rk_1$ were increased after especially 3 times of steaming processes. Interestingly, in black ginseng were prepared by 9 times steaming processes, the content of ginsenoside $Rg_3$ was 8.20 mg/g, approximately 18 times higher than that (0.46 mg/g) in red ginseng. In addition, the ratio of the protopanaxadiol group and protopanaxatiol group (PD/PT) were increased from 1.9 to 8.4 due to increasing times of steamming process.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.4
• /
• pp.238-243
• /
• 2017

Background: The production method of ginseng seedlings for ginseng cultivation is very important to ensure healthy rooting system as well as high quality, and yield of the resultant plants. This study was carried out to compare the growth characteristics of 2-year-old ginseng plants that were produced from seedlings grown in self soil nursery (SSN), nursery soil (NS) or hydroponic culture (HC). Methods and Results: The shading prop used was composed of four-layered 4 polyethylene (blue 3 + black 1) shade screen. The management of main field was done by inserting oil cake (1,200 kg/10 a) and then allowing Sudan grass to grow for a year. Seedling transplantation was carried out on April 6. Root growth was measured on October 25. Root weight was observed to be excellent at 6.0 g, following SSN transplantation. Root length was 21.2 cm for HC seedlings, but these plants had a physiological disorder (i.e., rusty root), in 83.5% plants of this treatment. The ratio of PD/PT (protopanaxadiol saponins / protopanaxatriol saponins) was higher in NS seedlings. Plant analysis revealed that Fe content was lower in HC seedlings with high rustiness. The growth of 2-years-old ginseng was different following these varying seedling cultivation methods, but seedlings from NS were not different from those grown in SSN. Conclusions: For the propagation of 2-year-old ginseng plants, NS seedlings may be a good substitute for SSN seedlings.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.150-150
• /
• 2012

본 연구는 1차원 나노 구조의 합성과 기초적 분석에 관한 연구로써 특히 무기 산화물 나노재료를 그 대상으로 하였다. 내용으로는 첫째, 1차원 코어 나노와이어의 합성을 하였고 Thermal evaporation, substrate의 가열, 그리고 MOCVD 를 사용한 결과들을 나열한다. 둘째, 코어-쉘 나노와이어를 제작하기 위하여 특히 쉘층의 제작방법을 연구하였는데 PECVD, ALD, 그리고 sputtering에 의한 결과들을 나열하고 간단히 설명한다. Thermal evaporation에 의한 1차원 나노와이어 합성의 경우는 MgO의 예를 들었는데 MgO 나노와이어는 Au가 증착된 기판을 열처리하여 Au dot를 형성하고 이의 morphology를 조절하여 최적의 나노와이어 합성조건을 선정하였다. 이로써 기판 morphology가 나노선의 성장및 형상에 영향을 준다는 사실을 알게 되었다. 이 사실은 In2O3기판을 사용하고 이의 표면거칠기를 열처리로 조절하므로써 역시 나노와이어의 성장을 촉진하는 방법을 찾아내었다. 또한 thermal evaporation공법은 source분말의 선택에 따라 다양한 소재를 제작가능하다는 결과를 제시하였다. 예를 들면 SiOx 층이 precoating된 chamber내에서 MgO 나노선을 합성하는 것과 동일한 조건으로 실험을 진행하면 Mg2SiO4 나노와이어가 형성된 것을 확인하였다. 또한 Sn과 MgB2 분말을 함께 적용할 경우 Sn tip을 가진 MgO 나노와이어를 얻을 수 있었다. 이는 Sn이 동시에 촉매의 역할을 하였기 때문일 것으로 추정된다. 한편 Sn과 Bi 혼합분말을 적용한 경우 Bi2Sn2O7 신소재 tip을 포함한 SnO2 나노와이어를 얻을 수 있었다. 이 경우 Bi원자가 적절한 촉매의 역할을 수행한 것으로 사료된다. Substrate의 가열공법에서는 Si wafer상에 각종 금속 즉 Au, Ag, Cu, Co, Mo, W, Pt, Pd등 초박막을 DC sputter 로 형성한후 annealing하는 기술을 사용하였다. 특기할 만한 것은 Co를 사용한 경우 나노와이어의 spring구조를 얻을 수 있었다는 점이다. MOCVD에 의하여는 Ga2O3및 Bi2O3 나노와이어를 비교적 저온에서 합성하였고 In2O3의 경우는 독특한 나노구조를 형성하였고 이의 결정학적 특성에 대하여 조사하였다.

• Anxiety and mood
• /
• v.8 no.1
• /
• pp.16-21
• /
• 2012

Objectives : The current study investigated the personality characteristics of the sexual offender using the Minnesota Multiphasic Personality Inventory (MMPI) test commonly used in clinical medicine. Methods : 30 sexual offenders (30 male) completed the Korean version of the MMPI. 20 of the 30 sexual offenders were patients with paraphilia. The sexual offenders had been admitted to the Institute of Forensic Psychiatry Ministry of Justice, Gongju, for sexual violence. Results : The MMPI scores of the sexual offenders were significantly higher on the psychopathic deviate (Pd), masculinity-feminity (Mf), paranoia (Pa), psychasthenia (Pt), schizophrenia (Sc) than the comparison group. And The MMPI scores of the sexual offenders had higher values for hypochondriasis (Hs), depression (D), hysteria (Hy), hypomania (Ma), social introversion (Si) than the comparison group, but were not significantly higher. Conclusion : Sexual offenders may be antisocial, paranoid, schizoid or psychasthenic. They seem to have psychotic psychopathology rather than neurotic psychopathology. These results suggested that the psychopatholgy of sexual offenders may be different to the control group.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.342-349
• /
• 1984

In order to obtain the basic information for the development of ginseng varieties with high saponin contents. saponin contents and ginsenosides of Panax ginseng (Korean ginseng) and Panax quinquefolium (American ginseng) grown under the same environmental conditions were analysed. Crude saponin contents of root and aerial parts were more in Panax quinquefolium than in Panax ginseng, and aerial parts had more saponin contents in comparison with a root. Protopanaxatriol saponin was greatly more in the aerial parts of ginseng while more amount of protopanaxadiol saponins were detected in the root. As for the ginsenosides, the patterns of ginsenosides detected in total saponin of the aerial parts were not different between two species, Panax ginseng and Panax quinquefolium, but the root ginsenoside patterns were quite different. Ginsenosides such as Rg$_2$, R$_{f}$. R$_{a}$ and R$_{o}$ were not detected in the root of Panax quinquefolium (American ginseng).).).).

• Korean Journal of Psychosomatic Medicine
• /
• v.13 no.1
• /
• pp.16-23
• /
• 2005

Objectives : We have studied female patients with either alopecia areata or androgenetic alopecia to evaluate psychological aspects, such as anxiety, depression, alexithymia, and characteristic personalities. In addition, we tried to examine the differences in psychological characteristics between these two types of alopecia, where the alopecia areata has been cotroversial on the role of stress in its etiology and the androgenetic alopecia seems to be more influeced by genetic and biological factors. Methods : All participated patients were females with alopecia for more than 1 you. Among them, 52 were with alopecia areata and 33 were with androgenetic alopecia. They were compared with 54 normal healthy controls by using MMPI, BDI, STAI-S, STAI-T, and TAS-20K. Results The average scores of F, Hs, D, Pd, Pa, Sc, Si in MMPI of alopecia groups were significantly higher than that of normal controls, and the androgenetic alopecia group had highest Hy and Pt scores. The average scores of BDI, STAI-S, and STAI-T in alopecia groups were higher than the normal controls. 94.2% of alopecia areata patients and 97.0% of androgenetic alopecia patients had severe depression, who scored higher than 23 in BDI. In TAS-20K, the average total scores of alopecia groups were higher than the normal control group, and the average Factor 3 score in androgentic alopecia was higher than the other groups. The alopecia groups scored higher than normal control group in STAI-S and STAI-T. Conclusion : Females with chronic alopecia were more depressed, had higher levels of anxiety, and more alexithymic than normal healthy females. In spite of arguments about etiological role of stress to alopecia, psychiatric interventions are needed for depression, and considerations for personality and psychological defense mechanism were needed in both types of alopecia.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.373-386
• /
• 2011

Geochemical study was performed on black slates and interbedded U-bearing coaly slates in Deokpyeongri area, the representative uranium mineralized district of the Ogcheon Metamorphic Belt, to discuss the genetic environments of the uranium deposit. REE concentration (254 ppm) of the black slates is higher than that (169 ppm) of the coaly slates and NASC-normalized REE patterns of the coaly slates show remarkable positive Eu anomaly. l11e redox-sensitive trace elements such as V, Cr, Co, Ni, Mo and U in the coaly slates are highly enriched compared to the black slates, especially for V of 24 times, Mo of 62 times, and U of 60 times. In additions, Pd and Pt are also enriched in the coaly slates. Positive Eu anomaly and the noticeable enrichment of the elements listed above compared to those of NASC indicate that those elements were not derived from common seawater but deposited under high temperature and reducing environment of submarine hydrothermal activities. Wide compositional ranges of major elements ($SiO_2/Al_2O_3$: 3.98~11.88, $Al_2O_3/Na_2O$: 25.6~139.06, $K_2O/Na_2O$: 6.80~46.85) also suggest that the source rocks of the sediments are mixtures of sedimentary rocks and igneous rocks. Higher sulfur contents in the coaly slates, 2.6 wt.%, than those in the black slates, 0.6 wt.% also indicates that the former was influenced by hydrothermal activities containing much sulfur. These geochemical characteristics are similar to the genetic environments of South China type PGE deposits (Mo-Ni-Zn-PGE) which is geotectonically correlated with the Ogcheon Metamorphic Belt and is known as sedimentary-exhalative deposits. In conclusions, the uranium and other metallic elements mineralization seems to have occurred in the sedimentary basin that was affected by submarine hydrothermal activities and rich in organic materials under oxygen-poor environments as well.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.39-59
• /
• 1985

The purpose of this study was to investigate how gap distances of 0.13mm, 0.15mm, 0.20mm, and 0.30mm affects solder joint strength from gold alloys and nickel-chromium base alloys and to examine the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys. The tensile test specimens were prepared in the split stainless steel mold with a half dumbbell shape 2.5mm in diameter and l2mm in length. 6 pairs of specimens of each gap distance group of gold alloys and nickel-chromium base alloys were made and 48 pairs of all specimens were soldered with solder gold of 666 fineness. All soldered specimens were machined to a uniform diameter and then a tensile load was applied at a cross-head speed of 0.10mm/min using Instron Universal Testing Machine, Model 1115. The fractured specimens at solder gold of solder joint fracture with each gap distance of 0.13mm, 0.15mm, 0.20mm, and 0.30mm were examined under the Scanning Electron Microscope, JSM-35c and the composition of solder gold, the solder joint of gold alloys and nickel-chromium base alloys was analyzed by Electron Probe Micro Analyzer. The results of this study were obtained as follows: 1. In case of soldering of gold alloys, the tensile strength between gold alloys showed $37.33{\pm}2.52kg/mm^2$ at 0.13, $39.14{\pm}3.35kg/mm^2$ at 0.15mm, $43.76{\pm}2.97kg/mm^2$ at 0.20mm, and $49.18{\pm}4.60kg/mm^2$ at 0.30mm. There was statistically significant difference at each gap distance, and so the greater increase of gap distance showed the greater tensile strength. 2. In case of soldering of nickel-chromium base alloys, the tensile strength between nickel-chromium base alloys showed $34.84{\pm}4.26kg/mm^2$ at 0.13mm, $37.25{\pm}2.49kg/mm^2$ at 0.15mm, $42.91{\pm}4.32kg/mm^2$ at 0.20mm, and $46.93{\pm}4.21kg/mm^2$ at 0.30mm. There was not statistically significant difference only between 0.13mm and 0.15mm and bet ween 0.20 mm and 0.30mm, but generally the greater increase of gap distance showed the greater tensile strength. 3. The greater increase of gap distance shoed less porosities in solder gold at solder joint fracture. 4. In solder gold Au, Cu, Ag, Zn, and Sn were composed and Au and Cu were mostly distributed uniformly. 5. In solder joints of solder gold and gold alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Au, Cu, Ag, Pt, and Pd were composed in gold alloys. Au and Cu of solder gold and gold alloys were mostly distributed uniformly and the diffusion of other elements except Pt and Pd around the solder joint was not almost found. In solder joints of solder gold and nickel-chromium base alloys Au, Cu, Ag, Zn, and Sn were composed in solder gold and Ni, Cr, and Al were composed in nickel-chromium base alloys. Au and Cu of solder gold and Ni and Cr of nickel-chromium base alloys were mostly distributed uniformly and the diffusion of other elements except Cr around the solder joint was not almost found.