• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.180-191
• /
• 2003

In this paper, the modelings of PSPICE of the piezoelectric transformer and CCFL drive circuit using an electrical equivalent circuit is proposed. In the CCFL drive circuit modeling the model parameters of the CCFL were derived using the method of least squares because push-pull inverter and loads such as CCFL were also modeled using PSPICE. It is considered that the simulation techniques can be used in the piezoelectric devices such as piezoelectric transformer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.350-357
• /
• 2006

In this paper, a PSPICE model of piezoelectric transformer and CCFL using an electrical equivalent circuit was presented. The parameters of CCFL for PSPICE were derived by the least square method. The computer simulations were performed and the results are compared on the PSIPCE model of piezoelectric transformer driven by push-pull inverter and CCFL.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.35-39
• /
• 2011

The PSPICE equivalent circuit elements of a 1550 nm InGaAsP laser diode were derived by using multi-level rate equations. The device parameters were extracted by using a self-consistent numerical method for the optical gain properties of the MQW active regions. The resulting equivalent circuit model is also applied to an actual optical transmitter, and its PSPICE simulation results show good agreement with the measured results once the parasitic capacitance due to the packaging is taken into account.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.74-77
• /
• 2011

PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.148-151
• /
• 1997

Pspice is not offered a library of mechanical factor like DC Motor, Induction Motor which is needed in Power Electronics field. Therefore, Induction Motor was made library by Equibalent circuit in this study. This model is applied in Voltage-Type inverter and is investigated its characteristics. IGBT is tested by two methods of Macro and Micro Modeling as semiconductor. PWM signal is used of pulse signal. Voltage and current, speed was simulated for assurance of model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.113-118
• /
• 2007

In this paper, a novel approach to using Subcircuit of Pspice in designing feedback for DC-DC converter systems is proposed. Proposed new approach, the feedback design procedures which are based on small signal modeling are programmed as a subcircuit in Pspice. For this purpose, Analog Behavioral Modeling (ABM) is used. By using the subcircuit, the component values of the error compensation amplifier can be easily obtained by means of Pspice DC analysis. The methodology of development is presented in detail and application examples demonstrated the effectiveness of the proposed approach in designing feedbacks for DC-DC converters. The converter with PWM method used continuous current mode and calculated buck converter control signal with average and linear current technique. To decide pole and zero K-method was adapted and this kind of design procedure took stable function.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.360-361
• /
• 2013

본 논문에서는 Power Integration사의 플라이백 컨버터 제어 IC인 TOP258YN의 주요 기능을 PSPICE로 구현 및 검증하였다. PSPICE를 이용한 IC 모델링을 통하여 제한적으로 제공되던 IC의 모델링을 시뮬레이션이 가능하도록 하였다. 모델링를 이용하여 실시한 시뮬레이션과 회로 실험 비교를 통하여 본 논문을 검증한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4975-4983
• /
• 2010

In this paper, the ordinariest and strongest simulator that many used to power electronics circuits and many different control technology can apply to more easily understand modeling the element, PSPICE and MATLAB are adapted a micro IGBT, a macro IGBT, PWM generator and to library moeling of validity of the Induction motor is interpreted. Micro IGBT model of demagnetization quality proved for modeling accuracy to through experiment, macromodel IGBT were simulated which the applied to voltage type PWM inverter to the cyclo-converter and induction motor of demagnetization.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.52-57
• /
• 2010

Power supply to the motor using the emergency power system is being used. However, this system is rarely used except during emergency power is not inefficient. On the other hand, the use of solar power systems Emergency backup power supply as well as in normal maintenance savings, as many have benefits. In this paper, general-purpose simulator PSPICE simulations performed using the PV system to be used in the various models made by the library. In addition, for use as an emergency power generation solar power system design, modeling and analysis of the characteristics and practical use make an effective device was confirmed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.959_960
• /
• 2009

Worldwide problem, due to the depletion of energy to power more efficient use of the same capacity to improvise for the use of LED brightness is growing. Recent advances in LED technology have lead to LEDs' widespread use in outdoor-signal applications, such as in traffic and railroad signals. Likewise, for large system design and production of issues leading to the simulation should be performed with less effort than to create a system that is reliable. In this paper a wide field of use to more accurately simulate a LED, and easy to use PSPICE can be used as general-purpose use of the LED device modeling. According to a particular LED, the device easy to use basic input variables to the values of library. In order to determine the behavior of the library to provide basic diode device, compared with PSPICE simulations confirm the accuracy of the simulation was performed.