• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2430-2432
• /
• 1998

Generally, in the best-known Pulse-type type and Frequency Modulated Continuous Wave(FM/CW)-type RF range measurement systems, the nearest measurable distance between antenna of system and targets is limited to several tens of meters. Moreover, in case of high-speed targets it is more difficult to measure the distance precisely. In this paper we design our own RF(X-band) range(up to 15 meters) measurement system usi code correlation for high- speed targets. It 0 the correlation value between transmitting receiving PN (Pseudo -Noise) codes. So we determine the distance between antenna of s and targets using this correlation value. We fabricated it using MIC techniques and experimental results show that the proposed syste fully qualified for a short range measurement syste

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.27-32
• /
• 2004

Absolute optical angle sensor is described that is an essentially digital opto-electronic device. Its purpose is to resolve the relative and absolute angle position of coded disk using Pseudorandom-code and Geometry-code. In this technique, the angular position of disk is determined in coarse sense first by Pseudorandom-code. A further fine angular position data based on Pixel count is obtained by Geometry-code which result 0.006$^{\circ}$ resolution of the system provided that 7 ${\mu}{\textrm}{m}$ line image sensor are used. The proposed technique is novel in a number of aspects, such that it has the non-contact reflective nature, high resolution of the system, relatively simple code pattern, and inherent digital nature of the sensor. And what is more the system can be easily modified to torque sensor by applying two coded disks in a manner that observe the difference in absolute angular displacement. The digital opto-electronic nature of the proposed sensor, along with its reporting of both torque and angle, makes the system ideal for use in intelligent vehicle systems. In this communication, we propose a technique that utilizes Pseudorandom-code and Geometry-code to determine accurate angular position of coded disk. We present the experimental results to demonstrate the validity of the idea.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.22-32
• /
• 2001

In this paper, we propose an average acquisition time and hardware design of high speed PN code synchronous acquisition system using DMF(Digital Matched Filter) with new switching method in DS-SS/CDMA(Direct Sequence Spread Spectrum Code Division Multiple Access). In reality, the PN code synchronous acquisition system using DMF has very complicated hardware, high cost and high power consumption. The PN code synchronous acquisition system using proposed switching method DMF can overcome those disadvantages. Therefore, we can make hardware simple and obtain low power and high density by reducing the area by 1/5 against the conventional approaches of using either the matched filters or the serial correlators. The proposed system architecture is also simple and easily controllable since there is no square-term circuit after execution of digital filtering.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.2
• /
• pp.45-53
• /
• 2015

This paper reviews the current seismic design code and research for dynamic earth pressure on retaining structures. Domestic design codes do not clearly define the estimation of dynamic earth pressure and give different comments for seismic coefficient, wall inertia and distribution of dynamic earth pressure using Mononobe-Okabe method. AASHTO has been revised reflecting current research and aims for effective seismic design. Various design codes are analyzed to compare their performance and economic efficiency. The results are used to make improvement of current domestic seismic design code. Further, it is concluded that the experimental investigation is also needed to verify and improve domestic seismic code for dynamic earth pressure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.775-781
• /
• 1999

A multi-media variable processing gain DS/CDMA system are considered. Two types of information sources with different rates and transmitting powers are assumed to be stransmitted simultaneously in the same channel. Average signal-to-noise ratios at the correlation receiver outputs for each type of information sources are analytically derived as funtions of partial cross-correlations between spreading code sequences. As the difference of information rates between information sources increase, the difference between signal-to-noise ratio regarding random spreading code and that regarding pseudo random spreading code increases (maximum 1.3dB). The result can provide a analytical tools for use in multi-media DS/CDMA system design.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.4
• /
• pp.155-161
• /
• 2014

The purpose of this study is to develop precise point positioning (PPP) algorithms based on GLONASS code-pseudorange, verify their performance and present their utility. As the basic correction models of PPP, we applied Inter Frequency Bias (IFB), relativistic effect, satellite antenna phase center offset, and satellite orbit and satellite clock errors, ionospheric errors, and tropospheric errors that must be provided on a real-time basis. The satellite orbit and satellite clock errors provided by Information-Analytical Centre (IAC) are interpolated at each observation epoch by applying the Lagrange polynomial method and linear interpolation method. We applied Global Ionosphere Maps (GIM) provided by International GNSS Service (IGS) for ionospheric errors, and increased the positioning accuracy by applying the true value calculated with GIPSY for tropospheric errors. As a result of testing the developed GLONASS PPP algorithms for four days, the horizontal error was approximately 1.4 ~ 1.5 m and the vertical error was approximately 2.5 ~ 2.8 m, showing that the accuracy is similar to that of GPS PPP.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.49-51
• /
• 2003

가입자망과 메트로 광 가입자망에서 광범위한 적용범위에 대해 광 기술을 선도하는 기존의 WDM은 증가하는 사용자 수를 수용하는 데 어려움을 가지며 WDM은 채널간의 잡음에 의한 제한과 유효 채널의 최대가 WDM 채널에서 광 증폭기 이득의 균일성에 의해 제한받는다. 따라서 사용자 수를 증가시키고 데이터량을 확장시킬 수 있는 CDMA 기술 도입이 하나의 대안으로 요구된다. 본 논문에서는 SMF에서 수십 km 거리를 갖는 가입자망에서 Prime sequence code를 사용한 2.5Gb/s 광 COMA 신호의 색분산 패널티에 대해 연구하였다. 시스템 모델에서, 색분산 패널티, 파형과 디코드된 신호의 아이 다이어그램(eye diagram)이 결과로써 보여지며, prime sequence code 수의 증가에 대해 Chirp 파라미터를 갖는 코드화된 신호의 색분산 패널티를 보인다. 이러한 접근은 pseudo-orthogonality를 가지는 비동기식 광 CDMA의 디자인에 특히 적합할 것이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1025-1033
• /
• 2004

This paper covers the detection of covert direct sequence spread spectrum signal without the PN(Pseudo Noise) code information. Due to its low probability of interception, the difficulty of spectrum surveillance increases. Detection parameters are the signal existence of given bandwidth, the length of spreading sequence used by transmitter, and the identification of spreading code for detected chip length. The triple correlation function(TCF) value which is one of the higher order statistical signal processing techniques can be used to detect spread spectrum signal without a prior knowledge, but, it has weakness that TCF results depend on the spread data sequence in actual application. This paper proposes the new scheme that not only overcomes the weakness but also presents better performance than the traditional TCF scheme. The performance comparison of conventional TCF with proposed technique shows that the triple correlation estimator(TCE) has better detection capability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1571-1578
• /
• 1999

In this paper, we present the Modulator Channel Card and VLSI chip for the Radio Transceiver Unit (RTU) of direct sequence code division multiple access (DS-CDMA) Wireless Local Loop (WLL) System. The Modulator Channel Card is designed and implemented using ASIC's, FPGA's and DSP's. The ASIC, compliance with Common Air Interface specification proposed by ETRI, has 40K gates which is designed to operate at 32MHz, and is fabricated using $0.6\mu\textrm{m}$ CMOS process. The ASIC carries out for I- or Q- phase data channel signal processing at a time, where each data channel processing consists of channel coding, block interleaving, scrambling, Walsh modulation, Pseudo-Noise (PN) spreading, and baseband filtering. The Modulator Channel Card has been integrated as a part of RTU of WLL system and is confirmed that it meets all functional and performance requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.187-198
• /
• 2004

In this paper, we analyze the performance of BPM (Bi-Phase Modulation) UWB (Ultra Wide Band) multiple access system using PN (Pseudo Noise) code based time hopping sequence in indoor wireless channels. In particular, we compare BPM UWB multiple access system with PPM (Pulse Position Modulation) UWB multiple access system in terms of signalling and demodulation schemes. Moreover, we analytically evaluate the performance of these UWB systems by deriving the bit error rate expressions under the assumption that pulse energy and data transmission rate are identical for both systems. Simulation results in additive white Gaussian noise and realistic indoor multipath wireless channels show that the performance of BPM scheme is approximately 1 dB better than that of PPM scheme. However, the performance discrepancy becomes negligible as the number of users increases.