• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.411-420
• /
• 2016

Efforts have continued in recent years to research and develop new alternative energy sources to replace coal and oil. These days interest is exploding in new pollution-free renewable energy due to the rising prices of finite energy sources. In the field of solar energy, one of new renewable energy that has been actively researched and commercialized, research efforts have been focused on solar light energy, whose efficiency has, however, reached a saturation point already. Thus, this paper proposed a solar tracking-type parabolic heat collection device to utilize solar thermal energy rather than solar light energy. The proposed device was designed in a parabolic form to collect solar heat effectively. The investigator made its prototype by incorporating a five-axis censor-based solar tracking technology in it to sense changes to the location of the sun according to the seasons and periods. In addition, an administrator interface was designed and implemented for the efficient management of heat collection device.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2016

Korea Institute of Machinery & Materials (KIMM) has developed a high efficient Stirling cryocooler with moving magnet linear compressor for precooling hydrogen liquefier and cooling high temperature superconductor (HTS) devices, such as superconductor cable and superconductor fault current limiters. Hydrogen liquefier and HTS electric devices require cryocooler with cooling capacity of hundred watts to kilowatts at 77 K. The compressor in the Stirling cryocooler uses opposed moving magnet linear motors to drive opposed pistons. High efficient Stirling cryocooler is designed by SAGE-software, manufactured and tested systematically. A cooling capacity of 1 kW at 77 K with an electric input power of 9.6 kW has been analyzed. But prototype test results of the Stirling cryocooler have the cooling capacity of 0.65 kW at 76.8 K with an electric input power of 8.1 kW. And then, 21.5% Carnot COP (Coefficient of performance) of the prototype Stirling cryocooler is achieved. The comparison analysis between SAGE-model and experimental results has shown the direction for further design optimization of the Stirling cryocooler.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.868-870
• /
• 2001

Salient pole rotor type single phase SRM(switched reluctance motor) can be use axial direction magnetic flux and radial direction magnetic flux at the same time. Then, it has higher energy density per unit volume and can be lessened the shaft length of motor or exciting magnetic force. Additionally, it's durability is good because it is simple structure and driving device. Prototype of Salient pole rotor type single phase SRM was fabricated by using parameters of three phase SRM and 3D FEM analysis. Also, driving device was fabricated for prototype. Speed and torque characteristic was confirmed through the experiments, and flux linkage, which is important parameter of SRM for generating torque, was measured. The induction emf was calculated by using ideal inductance graph and current graph. Calculated emf and measured emf was compared for confirming loss of prototype in this paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.69-72
• /
• 2001

A novel water-turbine, Katamax, for micro hydropower generator is proposed, which has reasonable efficiency even in two meters of water head. The basic concept of Katamax is similar to that of waterwheel except that Katamax has two axis on which the blades rotate, where general waterwheel has only one. Brief structure and principles of Katamax are explained and analysis for efficiency of each module are provided. The result of the prototype product of Katamax is briefly explained.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1551-1553
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-$T_c$ superconductors (HTS). A prototype HTS cable have been constructed multi-layer cable using Bi-2223 tape and tested. The result shows that the total transport current of HTS cable in $LN_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to $I^2$ and higher than losses of inner layer. As magnetic distribution were concentrated on outer layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.69-72
• /
• 2001

A novel water-turbine, Katamax, for micro hydropower generator is proposed, which has reasonable efficiency even in two meters of water head. The basic concept of Katamax is similar to that of waterwheel except that Katamax has two axis on which the blades rotate, where general waterwheel has only one. Brief structure and principles of Katamax are explained and analysis for efficiency of each module are provided. The result of the prototype product of Katamax is briefly explained.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.630-635
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-T$\sub$2/ superconductor(HTS). Thus we investigated previously the electrical and mechanical characteristics on Bi-2223 Ag sheathed tape. And a prototype HTS cable have been designed constructed and tested. In case of 19-filament type transport losses agree with the results of norris theory(strip). The critical current of HTS cable(1, 19-filament) in LN$_2$was 116[A], 240[A] and degradation coefficient(k) was 0.71, 0.73 respectively. In case of 19-filament cable critical current was decreased because of mechanical strain at pitch. And AC loss of HTS cable(19-filament) was 0.7 [W/m] in 240[A] loading

• International journal of advanced smart convergence
• /
• v.8 no.1
• /
• pp.58-64
• /
• 2019

In recent years, small mobile devices called personal mobility or smart mobility have attracted attention. Personal mobility refers to electric-driven personal transportation that can travel at close range and medium distance, including small electric vehicles, electric bicycles, electric motorcycles and electric scooters. Most of the electric scooters used in Korea are mainly imported from China. This is due to the fact that the price competitiveness of major components of electric scooters is owned in China. At this point, the domestic research direction is preferable for the composition and design of the electric scooter body rather than cost reduction for the components. In this study, we propose a new model of portable folding structure that is easy to use for electric scooters, which are personal vehicles using electric energy. We also made a prototype for practical use.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1289-1295
• /
• 2012

A process heat exchanger (PHE) in a nuclear hydrogen system is a key component for transferring the considerable heat generated in a very high temperature reactor (VHTR) to a chemical reaction that yields a large quantity of hydrogen. A performance test on a small-scale PHE prototype made of Hastelloy-X is underway in a small-scale gas loop at the Korea Atomic Energy Research Institute. Previous research on the high-temperature structural analysis of the small-scale PHE prototype had been performed using base material properties. In this study, a high-temperature structural analysis considering the mechanical properties in the weld zone was performed, and the obtained results were compared with those of the previous research.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.359-366
• /
• 2021

It's been more than 30 years since global warming by the increase in CO2 became a cause celebre worldwide. Recently the government promulgated Framework Act on on Low-Carbon Green Growth and has been continuously putting much effort into saving energy and reducing carbon dioxide emissions such as an international climate change conference to prevent the increase in CO2. However, because most cities are not planned for energy saving, new cities should be planned as the active energy-efficient urban structure for 'sustainable urban development' from a long-term perspective. This study aims to design a new prototype for the sustainable energy-independent and environment-friendly housing estates which is the nation's new vision in the era of the Fourth Industrial Revolution. A study on the energy-independent site planning and the quantitative standardization of its factor will be conducted.