• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.39-41
• /
• 2008

본 논문에서는 PEM(Proton Exchange Membrane) 연료전지 스택의 동적 특성에 관한 시뮬레이션에 대하여 기술한다. 연료전지의 출력은 부하 변동에 따른 가스 압력의 변화와 동작 온도의 변화 등에 민감하게 반응하는 특성을 갖고 있다. 본 논문에서는 부하 변화에 따른 스택 내부 채널의 가스 압력 변화를 계산하고 이를 Nernst 방정식에 적용하여 출력전압의 변동을 계산한 뒤 부하에 따른 손실을 계산하는 방법으로 동적 모델링을 수행하고 이를 이용한 시뮬레이션을 실시하였다. 스택의 각종 파리미터는 실험을 통해 추출되었고, 이를 적용한 Matlab/Simulink 시뮬레이션을 통해 제안된 모델이 연료전지 스택의 정특성 및 동특성을 적절하게 추종함을 확인하였다.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.199-204
• /
• 2015

Recently, fuel cell is a good alternative for energy source. Separator is a important component for fuel cell. In this study, The surface of separator was modified for corrosion resistance and electric conductivity. Reduced graphene oxide (rGO) was made by Staudenmaier's method. Nickel, phosphorus and rGO were coated on 6061 aluminum alloy as a separator of proton exchange membrane fuel cell by composite electroless plating. Scanning electron microscope, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were used to examine the morphology of Ni-P-rGO. Surface images were shown that the rGO was dispersed on the surface of Ni-P electroless plating, and nickel was combined with the un-reduced oxygen functional group of rGO.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1179-1180
• /
• 2006

This paper is aimed at presenting a computational model of a proton exchange membrane (PEM) fuel cell stack. The proposed simulation model is simple and at the same time includes all the important characteristics of a fuel cell stack. Close agreement between the simulation, manufacturer and experimental results confirm the validity and usefulness of the proposed FC model. Also, we propose the variable PI control method which has the best of follow efficiency than the PI control method. we confirm a reduced ripple and improved follow efficiencies when the system is applied the DC-DC converter, by simulation using PSIM.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.550-553
• /
• 2008

In this paper, experiments of air-breathing proton exchange membrane fuel cell (PEMFC) for mobile devices were carried out according to the cathode conditions. These conditions are defined by the cathode flow field plate type (the channel type, the open type) and the cathode surface direction. Single cell and 6-cell stack were used in this experiments. The experimental results showed that the open type cathode flow field plate gave better performance for small size PEMFCs because the open type cathode plate allowed better air convection than the channel type cathode plate. In the experiments related to the direction of the slits on the cathode flow field plate, the horizontal slit cell was better than the vertical slit cell. With respect to the cathode surface direction, when the cathode surface is placed in the direction normal to the ground, PEMFC generated more stable power in the mass transport loss region.

• Journal of Microbiology and Biotechnology
• /
• 제26권12호
• /
• pp.2171-2178
• /
• 2016

Polyester cloth (PC) was selected as a prospective inexpensive substitute separator material for microbial fuel cells (MFCs). PC was compared with a traditional Nafion proton exchange membrane (PEM) as an MFC separator by analyzing its physical and electrochemical properties. A single layer of PC showed higher mass transfer (e.g., for $O_2/H^+/ions$) than the Nafion PEM; in the case of oxygen mass transfer coefficient ($k_o$), a rate of $50.0{\times}10^{-5} cm{\cdot}s^{-1}$ was observed compared with a rate of $20.8{\times}10^{-5}cm/s$ in the Nafion PEM. Increased numbers of PC layers were found to reduce the oxygen mass transfer coefficient. In addition, the diffusion coefficient of oxygen ($D_O$) for PC ($2.0-3.3{\times}10^{-6}cm^2/s$) was lower than that of the Nafion PEM ($3.8{\times}10^{-6}cm^2/s$). The PC was found to have a low ohmic resistance ($0.29-0.38{\Omega}$) in the MFC, which was similar to that of Nafion PEM ($0.31{\Omega}$); this resulted in comparable maximum power density and maximum current density in MFCs with PC and those with Nafion PEMs. Moreover, a higher average current generation was observed in MFCs with PC ($104.3{\pm}15.3A/m^3$) compared with MFCs with Nafion PEM ($100.4{\pm}17.7A/m^3$), as well as showing insignificant degradation of the PC surface, during 177 days of use in swine wastewater. These results suggest that PC separators could serve as a low-cost alternative to Nafion PEMs for construction of cost-effective MFCs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.191-193
• /
• 2008

A fuel cell power system among various alternative power sources has many advantages such as low-polluted, high-efficient, and heat-recyclable, thus it is now able to be up to hundreds MWh-scaled through improving feasibility and longevity of it. During the last few years of the twentieth century, much changed to stimulate new and expanding interest in fuel cell technology. This paper presents optimal design and operational features of stand-alone 500W PEMFC(Proton Exchange Membrane Fuel Cell) system which can be a substitute instead fossil fuel. The stack of PEMFC is composed of 35 laminated graphite, and a unit cell of the stack has electrical characteristics as below; 14W, 0.9V, 15A. The other components of BOP(Balance of Plant) are composed of hydrogen and nitrogen tanks, regulators, 3way 5solenoid valves, mass flow meters, etc.

• Advances in Energy Research
• /
• 제2권2호
• /
• pp.73-84
• /
• 2014

Fuel cells of proton exchange membrane type (PEMFC) working with hydrogen in the anode and ambient air in the cathode ('air breathing') have been prepared and characterized. The cells have been studied with variable thickness of the cathode catalyst layer ($L_{CL}$), maintaining constant the platinum and ionomer loads. Polarization curves and electrochemical active area measurements have been carried out. The polarization curves are analyzed in terms of a model for a flooded passive air breathing cathode. The analysis shows that $L_{CL}$ affects to electrochemical kinetics and mass transport processes inside the electrode, as reflected by two parameters of the polarization curves: the Tafel slope and the internal resistance. The observed decrease in Tafel slope with decreasing $L_{CL}$ shows improvements in the oxygen reduction kinetics which we attribute to changes in the catalyst layer structure. A decrease in the internal resistance with $L_{CL}$ is attributed to lower protonic resistance of thinner catalyst layers, although the observed decrease is lower than expected probably because the electronic conduction starts to be hindered by more hydrophilic character and thicker ionomer film.

• 새물리
• /
• 제68권11호
• /
• pp.1173-1182
• /
• 2018

메조포러스 실리카는 강한 친수성과 구조적인 특성으로 인하여 저습환경에서도 이온교환막에 적절한 수화가 일어나도록 할 것이다. 그러므로 메조포러스 실리카와 나피온을 합성한 이온교환막은 낮은 상대습도에서도 우수한 양성자 전도도를 보일 것이다. 메조포러스 실리카와 나피온 합성이온교환막의 이온채널형성 그리고 네트워크를 통한 양성자 이동에 대한 이해는 합성이온교환막을 개발하고 최적화하기 위해 필수적이라 할 수 있다. 이 연구에서는 메조포러스 구조 (mesoporous cellular foam) $SiO_2/Nafion$ 합성이온교환막을 제작하고 양성자 전도도 및 성능을 평가하였다. 또한, 정전기력 현미경(electrostatic force microscopy, EFM)을 사용하여 메조포러스 구조 $SiO_2/Nafion$ 합성 이온교환막의 표면 전하 밀도 측정을 통한 이온 채널의 분포 및 밀도를 분석하였다. 연구는 몇 가지 주목할 만한 결과를 보여주었다. 첫째, 합성이온교환막은 저습환경에서 우수한 양성자 전도도 및 성능을 나타내었다. 둘째, 합성이온교환막은 국부적으로 이온채널의 밀도가 주목할 만하게 높은 지역이 형성되며 동시에 양성자 전도도가 극단적으로 낮은 지역 또한 동시에 형성됨을 확인하였다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.37-43
• /
• 2008

The durability test of turbo-blower for PEM fuel cell is very important process of BOP development. It is a major barrier to the commercialization of these systems for stationary and transportation power applications. Commercial viability depends on improving the durability of the air supply system to increase the reliability and to reduce the lifetime cost. In this study, turbo-blower supported by oil-free bearing is introduced as the air supply system used by 80kW proton exchange membrane fuel systems. The turbo-blower is a turbo machine which operates at high speed, so air foil bearings suit their purpose as bearing elements. The impeller of blower was adopted mixed type of centrifugal and axial. So, it has several advantages for variable operating condition. The turbo-blower test results show maximum parasitic power levels below 1.67kW with the 30,000 rpm rotating speed, the flow rate of air has maximum 163SCFM(@PR1.1). For proper application of FCV, these have to durability test. This paper describes the experiment for confirming endurance and stability of the turbo-blower for 500 hours.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.432-438
• /
• 2007

The reforming process for hydrogen production generates some impurities. Impurities in hydrogen such as $CO_2$, CO, $H_2S$, $NH_3$ affect fuel cell performance. It is well known that CO generated by the reforming process may negatively affect performance of cell, cause damage on catalysts resulting performance degradation. Hydrogen produced by reforming process includes about 2% methane. The presence of methane up to 10% is reported negligible degradation in cell performance. However, methane more than 10% in hydrogen stream had not been researched. The concentration of impurity supplied to the fuel cell was verified by gas chromatography(GC). In this study, the influence of $CH_4$ on performance of PEM fuel cell was investigated by means of current vs. potential experiment, long run(10 hr) test and electrochemical impedance measurement when the concentrations of impurities were 10%, 20% and 30%.