• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.560-563
• /
• 2002

This paper proposes a home control system architecture that have network configuration function. The proposed home control system architecture is implemented with partly hardware and software. For implementation of this system architecture, we developed ECONICS which is home automation controller. ECONICS consists of main board and communication modem. This communication modem supply the power line communication. The physical layer and the MAC layer software of EIA 709.1 standard protocol are implemented in communication modem. The upper layer software of EIA 709.1 standard protocol and home configuration software for home network installation, management, diagnostics, control and monitoring are implemented in main board of ECONICS. We verified the commercial feasibility of the proposed system through the home network configuration and operation. As a result, we have concluded that the proposed home control system architecture provides all the key function necessary to easily manage and control home network nodes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.63-66
• /
• 2001

This paper aims at developing remote control system to control and monitor distributed various devices such as photovoltaic Inverter system through internet. TCP/IP (Transmission Control Protocol/Internet Protocol) and photovoltaic inverter system operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, java-environment software is constructed. Also, HelloDevice, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232C is used between controller and applied device.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (D)
• /
• pp.480-484
• /
• 2008

DNP3.0은 산업 분야에서 SCADA(Supervisory Control And Data Aquisition) system의 개방형 프로토콜로 사용되어지고 있다. 본 논문에서는 개발하거나 개발된 Module들 사이에서 송 수신되는 DNP3.0 PDU를 분석할 수 있는 기능을 제공하는 DPA(DNP3.0 Protocol Analyzer) Module을 설계 및 구현하였다. 해당 Master Station에서 Request 메시지를 생성하여 Outstation으로 전송하고 Outstation에서 수신된 Request 메시지를 분석하여 Response 메시지를 생성하여 Response 한다. 또한 Master Station 과 Outstation에서 DNP3.0 프로토콜을 사용하여 통신하는 중간에서 송 수신하는 메시지를 Monitoring한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.413-416
• /
• 2007

Use ot Intelligent devices that work on the ANSI/EIA 709.1 protocol is increasing. In this study an ANSI/EIA 709.1 protocol analyzer that can monitor and analyze the packets on LonWorks network is designed and developed. The device is based on TMS320LF2407A processor for decoding data packets, and uses XScale processor for sending data to the application program on PC. The application program has various analysis features as well as basic monitoring function. The developed device can be used for debugging purposes in development of any kind of LonWorks devices, and also it is useful in maintenance of LonWorks network or Lon Works devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.219-224
• /
• 2002

This paper aims at developing remote control system to control and monitor distributed various devices such as UPS or photovoltaic inverter system through internet. TCP/IP(Transmission Control Protocol/Internet Protocol) and photovoltaic inverter system operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, java-environment software is constructed. Also, HelloDevice, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232C is used between controller and applied device.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권6호
• /
• pp.756-764
• /
• 2002

SoC 설계의 검증 비용이 전체 설계 비용의 70%를 차지한다. 이런 검증을 위한 노력과 시간을 줄이기 위해서는 SOC 설계 검증 수준을 시그널 수준 또는 사이클 수준에서 트랜잭션 수준으로 높여야 할 필요성이 있으며, 또한 그렇게 하는 것이 바람직하다. 이 논문에서는 인터페이스 신호를 모니터하고, 트랜잭션의 수행을 로그 파일에 기록하고, 트랜잭션 오류를 보고하는 트랜잭션 모니터 모듈의 생성 방법에 대해 기술한다. 인터페이스 프로토콜에 대한 기술을 입력으로 모니터 모듈을 생성한다.

• 산업안전기술지
• /
• 제2권1호
• /
• pp.6-10
• /
• 2002

Requirements for Distributed Monitoring and Control Networks(DMCN) differ greatly from those of typical data networks. Specifically, my DMCN technology which employs a filedbus protocol is different from IP network protocol TCP/IP. In general, one needs to integrate fieldbus protocol and TCP/IP to realize DMCN over IP network or internet, which can be viewed as Virtual Device Network(VDN). Interoperability between devices and equipments is essential to enhance the quality and the performance of predictive maintenance(PM). This paper suggests a basic framework for VDN using DMCN over IP network and a method to guarantee interoperability between devices and equipments.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.535-540
• /
• 2003

In this Paper, a LON based distributed control system for HVAC is described. We developed multi-protocol converter based on SoC, Neuron Chip, embedded Linux. It utilizes the network environment and therefore requires an appropriate operating system for handling protocols and an advanced development environment. The open source licensing, reliability, and broad hardware support are key reasons for use of embedded Linux in embedded industry. The multi-prootocol converter integrates LonWorks devices to a client with Java applet. The system consists of three-tier architecture, such as clients, multi-protocol converter, and LonWorks devices. The experiment result show that multi-protocol converter using embedded Linux is a flexible and effective way to build a Web-based monitoring and control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.52.1-52
• /
• 2001

System establishment using a network may be a decisive factor both for creating a flexible production system and increasing reliability and serve as a basis for setting up of a management system that will make the designing, maintenance, and repair easier. It is therefore imperative to develop a protocol which is simple to use for communications and connections among different devices. The objectives of this study is to establish communications protocol stack that will enable to conduct an effective monitoring of production facilities and to secure flexibility of reduction control system, and to improve the working ratio of the production facilities by centralization of communications system through effective collecting and storing of the diversified data of multi-type and multi-device production facilities.

• 한국정보통신학회논문지
• /
• 제24권8호
• /
• pp.1113-1116
• /
• 2020

In the EH-WSN(Energy Harvesting Wireless Sensor Network), the routing protocol must consider the power condition of nodes such as residual power and energy harvesting rate. Many EH-WSN studies have emphasized the power aspect and make the urgency of sensed data less important. However, in applications such as environmental monitoring, stability and latency become more important issues than power efficiency for urgent data. In this paper, we designed a routing protocol that can set path according to data urgency. To this end, relay nodes are determined considering the urgency of date. Nodes with poor power do not participate in routing when normal data is generated, so that urgent data can be transmitted reliably with low latency. The performance of the proposed routing protocol is analyzed by computer simulation.