• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.5
• /
• pp.365-374
• /
• 2004

This paper proposes the architecture of Intermediate System to Intermediate System routing protocol. IS-IS is a link state routing protocol designed to provide routing in a network layer protocols with datagram services. IS-IS has favored scalability and stability. So, it is important to support IS-IS for the MPLS system used in backbone networks. Especially, IS-IS must provide network state information and available resource information for supporting qualify of services in MPLS network. Therefore, we propose the design architecture of IS-IS routing protocol and the implementation technologies. Also, we propose extended architecture for traffic engineering in ATM based MPLS system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.401-405
• /
• 2007

In sensor network, cluster based routing protocol about efficient energy usage method has researched variously. But existing cluster based routing protocol have problems. one of the problem is sensor nodes's imbalance energy consumption problem at cluster reconstruction. anther is non- connection problem between header node and spc node when they are far from each other, not properly connected. We propose cluster re-division and header node of multihop transmission method in this paper. The cluster re-division method is the method that re-divides existing routing protocol with the small-scale cluster and multihop transmission method is the method regarding the relay transmission between the header nodes. Through the simulation, the proposed routing mechanism shows more excellent than exiting routing protocol in balance energy consumption and energy efficiency.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.265-270
• /
• 2014

The working-day movement model, which implemented in the ONE simulator, supports the environments similar to the real life by using the transportation. However, there is no taxi movement model in the working-day movement model. So, we implemented a taxi movement model in the ONE simulator as the previous work. It is changed significantly for the simulation results of routing protocols in the ONE simulator. In this paper, we analyze the performance evaluation of the DTN routing protocol such as an epidemic routing protocol using our taxi movement model in the ONE simulator.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.155-161
• /
• 2014

In this paper, a cluster-based routing protocol in distributed sensor network is proposed, which enable the balanced energy consumption in the sensor nodes densely deployed in the sensor fields. This routing protocol is implemented based on clusters with hierarchical scheme. The clusters are formed by the closely located sensor nodes. A cluster node with maximum residual energy in the cluster, can be selected as cluster head node. In routing, one of the nodes in the intersection area between two clusters is selected as a relay-node and this method can extend the lifetime of all the sensor nodes in view of the balanced consumption of communication energy.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.449-454
• /
• 2008

Finding an energy efficient route is one of the very important issues in the wireless sensor networks. The route scheme should consider both of the energy level of sensor nodes and the number of hops at the same time. First of all, this paper proposes an optimum routes finding scheme (ORFS), which could be used in the sensor network routing protocols. The scheme uses an optimum value for the path with the considerations of both the minimum energy level of a path and the number of hops at the same time. After that, this paper proposes a routing protocol based on the ORFS for how it could be used for the multipath directed diffusion with data aggregation (MDD-A), to get the better energy efficiency. The analysis result shows that the proposed routing protocol could lengthen the network life cycle about 18.7% compared to the previous MDD-A related protocols.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.417-424
• /
• 2007

Mesh networks using WLAN technology have been paid attention as a key wireless access technology. However, many technical issues still exist for its successful deployment. One of those issues is the routing problem that addresses the path setup through a WLAN mesh network for the data exchanges between a station and a wired network. Since the characteristics of a WLAN mesh network can be very dynamic, the use of single routing protocol would not fit for all environments whether it is reactive or proactive. Therefore, it is required to develop an adaptive routing protocol that modifies itself according to the changes in the network parameters. As a logical first step for the development, an analytical model considering all the dynamic features of a WLAN mesh network is required to evaluate the performance of a reactive and a proactive routing scheme. In this paper, we propose an analytical model that makes us scrutinize the impact of the network and station parameters on the performance of each routing protocol. Our model includes the size of a mesh network, the density of stations, mobility of stations. and the duration of network topology change. We applied our model to the AODV that is a representative reactive routing protocol and DSDV that is a representative proactive routing protocol to analyze the tradeoff between AODV and DSDV in dynamic network environments. Our model is expected to help developing an adaptive routing protocol for a WLAN mesh network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2002-2019
• /
• 2017

RPL routing protocol for low-power and lossy networks is an Internet Engineering Task Force (IETF) recommended IPv6 based protocol for routing over Low power Lossy Networks (LLNs). RPL is proposed for networks with characteristics like small packet size, low bandwidth, low data rate, lossy wireless links and low power. RPL is a proactive routing protocol that creates a Directed Acyclic Graph (DAG) of the network topology. RPL is increasingly used for Internet of Things (IoT) which comprises of heterogeneous networks and applications. RPL proposes a single path routing strategy. The forwarding technique of RPL does not support multiple paths between source and destination. Multipath routing is an important strategy used in both sensor and ad-hoc network for performance enhancement. Multipath routing is also used to achieve multi-fold objectives including higher reliability, increase in throughput, fault tolerance, congestion mitigation and hole avoidance. In this paper, M-RPL (Multi-path extension of RPL) is proposed, which aims to provide temporary multiple paths during congestion over a single routing path. Congestion is primarily detected using buffer size and packet delivery ratio at forwarding nodes. Congestion is mitigated by creating partially disjoint multiple paths and by avoiding forwarding of packets through the congested node. Detailed simulation analysis of M-RPL against RPL in both grid and random topologies shows that M-RPL successfully mitigates congestion and it enhances overall network throughput.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.206-208
• /
• 2005

Wireless sensor network's value has increased greatly in recent years in the fields of Ubiquitous Computing that function as solution to reduce both the limitation and collision about RFID Technology. The research for wireless sensor network technology is proceeding with the research for various sensor nodes, powerful routing algorithms, securities for data transmission, and valid applications. This paper suggests that we make the new multi-hop routing algorithm using RSS in order to implement enhanced multi-hop routing algorithm. This paper should demonstrate that the routing algorithm using suggested RSS is superior to routing algorithm based on established BSDV(Destination Sequenced Distance Vector).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.1-9
• /
• 2004

In this paper, we propose a multicast routing protocol for the seamless delivery of multicast data to mobile hosts through the optimal route in IPv6-Based mobile networks. The proposed multicast routing protocol reduces the tree reconstruction overhead by limiting the tunneling length according to the mobility of mobile hosts. In this way, our protocol satisfies the bound of the end-to-end delay and supports the seamless handoff. Analytical and simulation results show that the proposed protocol has better performance in terms of the tree reconstruction, tunneling service and multicast packet loss than the previous protocols does.