• BMB Reports
• /
• v.47 no.2
• /
• pp.110-114
• /
• 2014

Fibrin is a natural provisional matrix found in wound healing, while type I collagen is a major organic component of bone matrix. Despite the frequent use of fibrin and type I collagen in bone regenerative approaches, their comparative efficacies have not yet been evaluated. In the present study, we compared the effects of fibrin and collagen on the proliferation and differentiation of osteoblasts and protein adsorption. Compared to collagen, fibrin adsorbed approximately 6.7 times more serum fibronectin. Moreover, fibrin allowed the proliferation of larger MC3T3-E1 pre-osteoblasts, especially at a low cell density. Fibrin promoted osteoblast differentiation at higher levels than collagen, as confirmed by Runx2 expression and transcriptional activity, alkaline phosphatase activity, and calcium deposition. The results of the present study suggest that fibrin is superior to collagen in the support of bone regeneration.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.342-351
• /
• 2004

Poly(ethylene glycol) (PEG1K) and sulfonated PEG (PEG1K-SO$_3$) methacrylate (MA) copolymers have been prepared and characterized. The structures of the synthesized copolymers were confirmed by $^1$H and $^{13}$ C NMR spectroscopy and elemental analysis. The bulk characteristics of the copolymers were evaluated by viscosity and thermal analysis. The surface properties of the copolymers were investigated using dynamic contact angle measurements and electron spectroscopy for chemical analysis. The hydrophilicity of the surfaces modified with PEG1KMA or PEG1K-SO$_3$MA increased, possibly as a result of the orientation of the hydrophilic PEG1KMA/PEG1K-SO$_3$MA chains into the water phase. Platelets adhered less to the surfaces of the copolymers than they did to a polyurethane control. In addition, adhesion of platelets to the copolymer surfaces decreased upon increasing the chain density of PEG1KMA and sulfonated PEG1KMA in the copolymers. Both bacterial adhesion and protein adsorption were significantly reduced on the copolymer surfaces and their levels differ depending on the kind of surface or media.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.190-195
• /
• 2012

Interfacial and rheological properties of selected hydrogel formulations were studied to understand the contact-lens comfort in end use. It was concluded that protein adsorption from aqueous solution decreased monotonically with increasing surface energy (water wettability) of tested hydrogels. Also, it has revealed that friction coefficient of polydimethylsiloxane-polyvinylpyrrolidone (PDMS-PVP) was significantly larger that 2-hydroxyethyl methacrylate (HEMA) based hydrogels. Interestingly, in artificial tear solution, friction coefficients of HEMA based hydrogels were larger than silicone hydrogels.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.185-189
• /
• 1985

Extracellular $\beta$-galactosidase from the culture broth of L. sporogenes was purified to apparent homogeniety by procedures including ammonium sulfate fractionation, Sephadex G-200 gel filtration, DEAE-Sephadex A-50 ion exchange chromatography, and Hydroxyapatite adsorption chromatography. The purifying procedures resulted in 347-fold purification with the overall yield of 39.5％ The purified enzyme had a specific activity(using ONPG as a substrate) of about 1, 585 units per mg protein. The molecular weight of the enzyme protein was estimated to be 140, 000 by gel filtration on Sephadex G-200, and SDS-polyacrylamide gel electorphoresis showed that the enzyme consisted of two identical subunits with a molecular weight of 72, 000.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.196-203
• /
• 2002

A novel process for urokinase purification was studied using p-aminobenzamidine as the ligand and sepharose 4B as the matrix. The adsorption, washing, and elution conditions were optimized by an unusual method. An adsorption buffer containing 2.5 M NaCl and $1\%$ Tween 80 facilitated the adsorption of urokinase on the affinity media and prevented contaminants from binding to the p-aminobenzamidine affinity gel. It was found that $5\%$ Tween 80 removed most of the contaminants from the affinity column. A 0.2 M glycine elution buffer containing 0.5 M NaCl (pH 3.0) was found to have a strong elution ability with a high recovery and purity of urokinase. A crude urokinase material of231 IU/mg protein from human urine was purified to 124,300 IU/mg protein with a purification factor of 538 and yield of $86.7\%$. As a result, a high purity urokinase was obtained with only a single affinity chromatography step. The purification process was successfully scaled-up to a 2-1 chromatography column. The resulting urokinase eluate could be directly lyophilized, thereby complying with Chinese pharmacopoeia (1995 version) standards.

• Applied Biological Chemistry
• /
• v.35 no.6
• /
• pp.457-461
• /
• 1992

The emulsion stabilizing properties of soy protein isolate (SPI) were investigated in terms of the protein and oil concentration. Particularly, the dependence of emulsion stability on the oil particle size and viscosity of emulsion was studied in conjunction with the adsorption pattern of protein onto the water/oil interface during emulsification. The data showed that increasing protein concentration decreased the oil particle size and increased the emulsion viscosity, resulting in the enhanced emulsion stability. In contrast, increasing oil concentration increased both the oil praticle size and the emulsion viscosity, and thus emulsion stability varied depending on which factor predominated the overall emulsion system.

• BMB Reports
• /
• v.37 no.6
• /
• pp.726-734
• /
• 2004

White spot disease (WSD) is caused by the white spot syndrome virus (WSSV), which results in devastating losses to the shrimp farming industry around the world. However, the mechanism of virus entry and spread into the shrimp cells is unknown. A binding assay in vitro demonstrated VP28-EGFP (envelope protein VP28 fused with enhanced green fluorescence protein) binding to shrimp cells. This provides direct evidence that VP28-EGFP can bind to shrimp cells at pH 6.0 within 0.5 h. However, the protein was observed to enter the cytoplasm 3 h post-adsorption. Meanwhile, the plaque inhibition test showed that the polyclonal antibody against VP28 (a major envelope protein of WSSV) could neutralize the WSSV and block an infection with the virus. The result of competition ELISA further confirmed that the envelope protein VP28 could compete with WSSV to bind to shrimp cells. Overall, VP28 of the WSSV can bind to shrimp cells as an attachment protein, and can help the virus enter the cytoplasm.

• Genomics & Informatics
• /
• v.4 no.3
• /
• pp.133-136
• /
• 2006

The adsorption of proteins on the surface of glass slides is essential for construction of protein chips. Previously, we prepared a nickel-coated plate by the spin-coating method for immobilization of His-tagged proteins. In order to know whether the structural factor is responsible for the immobilization of His-tagged proteins to the nickel-coated glass slide, we executed a series of experiments. First we purified a His-tagged protein after expressing the vector in E. coli BL21 (DE3). Then we obtained the unfolding curve for the His-tagged protein by using guanidine hydrochloride. Fractions unfolded were monitored by internal fluorescence spectroscopy. The ${\Delta}G_{H20}$ for unfolding was $2.27kcal/mol{/pm}0.52$. Then we tested if unfolded His-tagged proteins can be adsorbed to the nickel-coated plate, comparing with $Ni^{2+}-NTA$ (nitrilotriacetic acid) beads. Whereas unfolded His-tagged proteins were adsorbed to $Ni^{2+}-NTA$ beads, they did not bind to the nickel-coated plate. In conclusion, a structural factor is likely to be an important factor for constructing the protein chips, when His-tagged proteins will immobilize to the nickel-coated slides.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.479-487
• /
• 2020

Current assumptions are used in the formulation of pseudo-first (PFO) and second-order (PSO) models to describe the kinetic data of filtration based on ideal operating conditions. This paper presents a new model developed with pseudo n^th order and based on real assumption. A comparison was performed between PFO, PSO and the new model to highlight their performance and the optimisation of the pseudo-order equation, using MATLAB software. Adsorption characteristic of bovine serum albumin adsorption on the track-etched membrane are used as a medium based on protein filtration data were extracted from the literature for different concentrations to demonstrate the comparison between PFO/PSO and the new model. The pseudo first and second-order kinetic models were applied to test the experimental data and they did not provide reasonable values. The results show that the predicted values are consistent with experimental values giving a good correlation coefficient R² = 0.997 and a minimum root mean squared error RMSE = 0.0171. Indeed, the experimental results follow the new model and the optimal pseudo equation order n = 1.115, the most suitable curves for the new model. As a result, we used different experimental adsorption data from the literature to examine and check the applicability and validity of the model.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.415-421
• /
• 2002

A sulfonated PP-g-styrene ion-exchange hollow fiber membrane was prepared by pre-irradiation method with E-beam followed by sulfonation reaction. Degree of grafting increased with the increase of styrene monomer concentration and showed the maximum value of 128% at 80% of styrene monomer composition. Sulfonation yield increased with the degree of grafting. At 100% degree of grafting, sulfonation yield showed the maximum value of 13.4%. Ion exchange capacity of sulfonated HPP-g-styrene of 3.42 meq/g was attained, resulting in the remarkable increase of adsorption ability BET analysis proved that the surface area of sulfonated HPP-g-styrene was 62.54 $m^2/g$ and the mean pore size was 25 $\AA$. From the BSA adsorption experiments, the adsorption amount of BSA was increased with sulfonation. At 13.4% sulfonation yield the adsorption amount of BSA was maximum as 3.8 mg/g. Sulfonated HPP-g-styrene was synthesized successfully and suitable for the adsorption and separation of BSA.