• 약학회지
• /
• 제44권1호
• /
• pp.87-94
• /
• 2000

In order to investigate the hepatoprotective constituents, Melonis Pedicellus was systematically extracted and fractionated with n-hexane, ethyl acetate, butanol and water Treatment of rats with ethyl acetate fraction reduced hepatic injuries induced by $\alpha$-naphthylisothiocyanate or D-galactosamine, whereas the components in water fraction showed protective effect only against D-galactosamine-induced hepatitis in rats. Two cucurbitacins and three sterols were isolated from ethylacetate fraction and their chemical structures were identified as cucurbitacin B, isocucurbitacin B, $\alpha$-spinasterol, stigmast-7-en-3-ol and stigmast-7-en-3-ol-0-$\beta$-D-glucopyranoside. Cucurbitacin B at the dose of 1 mg/kg (p.o.) signifcantly increased in bile flow in rats with ANIT-induced cholestasis. Isocucurbitacin B at 5 mg/hg (p.o.) showed signilicant protective effects against ANIT-induced cholestasis. These results showed that cucurbitacin B and isocucurbitacin B from Melonis Pedicellus may have hepatoprotective effect in rats with experimental cholestasis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.509-514
• /
• 2001

The Fibre-optic Bragg grating (FBG) sensor is broadly accepted as a structural health monitoring device for Fibre reinforced plastic (FRP) materials by either embedding into or bonding onto the structures. The accuracy of the strain measured by using the FBG sensor is highly dependent on the bonding characteristics among the bare optical fibre, protective coating, adhesive layer and host material. In general, the signal extracted from the embedded FBG sensor should reflect the straining condition of the host structure. This paper presents a theoretical model to evaluate the differential strains between the bare fibre and host material with different adhesive thickness and modulus of the protective coating of the embedded FBG sensor.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.416-419
• /
• 2004

The kinetic energy during ship collision with bridge piers is released as the permanent deformations of structure and friction between the impact surfaces. So the ship collision energy is estimated from the equations of motions for ship-pier collisions which include the influence of the surrounding water, different impact angles and impact locations. The normal impact energy and tangent impact energy at a collision location and angle can be transformed into the normal impact force and friction force acting on the structure. Also the kinetic energy after collisions is calculated from the linear and angular impulse of ship collisions. The collision energy absorption system such as the protective structures for bridges is designed by evaluating the damage portions of ship and structure during the ship-structure collisions varying from the soft impact to hard impact and then the estimation of it will be suited for the design of protective measures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1395-1398
• /
• 2007

MgO thin films were deposited by e-beam evaporator using the 2-step method for alternate current plasma display panels (AC-PDPs). Glancing angle deposition (GLAD) method was employed to produce various surface geometry of the thin film; the bottom layer was deposited on a substrate by normal e-beam evaporation method and the top layer was deposited on bottom layer with $85^{\circ}$ by GLAD method. Results show that firing and sustain voltages improved as the sharpness of surface and isolated columnar structures increases, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.229-232
• /
• 2005

Protective surface coating for concrete is available for applying to concrete structures for protecting chloride attack. However, the useful data obtained from real marine environment for surface coating materials is not sufficient yet in Korea and thus the engineers face many difficulties to apply the coating method in durability design. Surface-coated concrete specimens were fabricated and installed around the piers of Seohae grand bridge to observe long-term performance in actual marine environment. In this study, the results of durability of surface coatings for 3 years were reported.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.224-227
• /
• 2007

The reconstruction characteristics of MgO (111) textured protective layer by over-frequency accelerated discharge in AC-PDP were investigated and correlated to the variations of electronic structures. The reconstruction process and exaggerated grain growth (EGG) were explained by defect-assisted 2-D nucleation and growth mechanism combined with charged cluster model.

• Archives of Pharmacal Research
• /
• 제29권11호
• /
• pp.963-968
• /
• 2006

Seven phenolic compounds (1-7) were isolated from the tubers of Gastrodia elata. Their structures were elucidated on the basis of MS and NMR spectral data. p-Ethoxymethyl phenyl-O-${\beta}$-D-glucoside (1) was proved to be a new compound, with N-(p-hydroxybenzyl)-adenosine (7) isolated from this plant for the first time. In this study, the protective effects of the six constituents (1-6) on PC12 cells against the cytotoxicity induced by KCI and glutamate were also investigated. The viability of the PC12 cells was significantly enhanced by pretreatment with the six phenolic constituents.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.691-697
• /
• 2011

본 연구에서는 방호공의 최대방호능력을 산정하기 위하여 선박충돌방호공과 선박을 수치적으로 모델링하고 준정적해석으로 충돌해석을 수행하였다. 방호공은 구조물의 비선형 거동과 지반의 지지효과 및 인발을 고려하여 모델링되었다. 충돌선박은 비선형거동이 집중되는 선수부분을 정밀하게 모델링하고 효율적인 해석을 위해 mass scaling기법을 사용하였다. 동일한 해석모델에 대하여 동적해석을 추가적으로 수행하여 두 해석방법의 차이점과 효율성을 평가하였다. 선박과 방호공의 에너지소산곡선을 바탕으로 충돌선박이 교량하부구조에 충돌력을 전달되는 시점을 추정하고, 이를 바탕으로 대상선박의 최대충돌허용속도를 산정하였다. 이러한 추정방법이 방호공의 에너지소산한계를 명확히 판단할 수 있어 공학적으로 효율적인 산정방법임을 보였다.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.715-726
• /
• 2023

본 연구에서는 수소 충전소와 같은 폭발 가능성을 가진 구조물들의 안전 설계 방안으로 방호패널이 희생 부재로 설치되어 구조물의 직접적인 피해를 최소화하고 회복 탄력성을 가질 수 있어야 한다고 제시하였다. 이를 위해 비상체의 고속 충돌 상황에서 방호 패널이 구조물과 밀착 또는 이격 설치되었을 때 구조물이 받는 영향을 정량적으로 평가하는데 실험의 초점을 맞추고 있다. 실험 설계는 우수한 재현성을 위해 기존에 주로 사용한 콘크리트 구조부재 대신 강판을 사용하며, 철판 배면의 변형 차이를 통해 구조부재의 충격을 비교·분석하였다. 또한, 방호 부재의 이격재로 사용한 탄성체의 물성 변화와 방호부재 및 탄성체에 따른 충격파 전달 시간의 차이가 구조부재에 미치는 영향을 조사하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.253-256
• /
• 2006

For nuclear concrete structures on the coast, the prevention and management against salt damage is needed because they are being under the influence of the sea water at all times. In general, the deterioration of the concrete is generated in concrete surface firstly and then extended into concrete gradually as its service life increases. Therefore, the protective layer on the concrete surface is needed to establish and manage the durability of concrete. To enhance the durability performance of the existing and new concrete, the development and application of a high-performance penetration sealer is needed. The sealer has to have the functions that are able to prevent the attack of the moisture, carbon dioxide, and harmful substance from the outside. Therefore, the aim of this project is to guarantee the long service-life and waterproof performance of a nuclear concrete structures by increasing the density of the existing and new concrete surface layer, and to enhance the dust-proof performance of the uncoating part of the nuclear safety-relative structures.