• 제목/요약/키워드: Protection film

검색결과 257건 처리시간 0.03초

ESD 보호를 위한 SOI 구조에서의 SCR의 제작 및 그 전기적 특성 분석 (Design and Analysis of SCR on the SOI structure for ESD Protection)

  • 배영석;천대환;권오성;성만영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.10-10
    • /
    • 2010
  • ESD (Electrostatic Discharge) phenomenon occurs in everywhere and especially it damages to semiconductor devices. For ESD protection, there are some devices such as diode, GGNMOS (Gate-Grounded NMOS), SCR (Silicon-Controlled Rectifier), etc. Among them, diode and GGNMOS are usually chosen because of their small size, even though SCR has greater current capability than GGNMOS. In this paper, a novel SCR is proposed on the SOI (Silicon-On-Insulator) structure which has $1{\mu}m$ film thickness. In order to design and confirm the proposed SCR, TSUPREM4 and MEDICI simulators are used, respectively. According to the simulation result, although the proposed SCR has more compact size, it's electrical performance is better than electrical characteristics of conventional GGNMOS.

  • PDF

반도체 검출기에 의한 전자선 선량분포에 관한 연구 (A Study on Dose Distribution of Electron Beams by Semiconductor Detector)

  • 강위생;하성환;박찬일
    • Journal of Radiation Protection and Research
    • /
    • 제9권1호
    • /
    • pp.19-25
    • /
    • 1984
  • There is not yet an universal method of electron dosimetry. The Authors measured dose distributions of the electron beams from Clinac-18 by means of silicon detector connected to X-Y recorder, and compared them in water phantom with dose distributions measured by film and ion chamber, both inserted in polystyrene phantom. The results are as followings, 1. Dose in build-up region increased with the field size for all energy, and depth dose profiles of $6{\sim}12MeV$ beam under the depth of maximum dose were independent of field size, but those of 15 and 18 MeV beam were dependent on the field size. 2. The widths of penumbra by semiconductor detector were narrower than those by film for same energy beam. 3. Depth dose profiles by three different dosimeter did not coincide each other. In the build-up region, dose by semiconductor detector was lower than that by any other dosimeter.

  • PDF

고투과성 및 자정기능을 가지는 태양전지 보호필름의 제작 (Fabrication of High-transparent and Self-cleaning Solar Cell Protection Film)

  • 이성환;한강수;신주현;황선용;이헌
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.75.1-75.1
    • /
    • 2011
  • 화석연료의 고갈과 온실가스 배출의 증가로 지속 가능한 친환경 에너지 생산이 요구되는 가운데, 태양광 발전은 이러한 조건을 만족시키는 에너지 생산 방안으로 주목받고 있다. 태양광 발전은 태양 직사광을 이용한 발전 방법 때문에 실외에 설치되어야 하며 이에 따라 외부의 충격이나 오염물질로부터 태양전지 패널을 보호하기 위한 보호층이 필수적이다. 그러나 보호층에 의한 입사광의 반사 및 먼지나 황사에 의한 보호층의 오염 등은 태양전지의 발전 효율을 감소시키는 요인으로 작용하여 이에 대한 대응이 필요하다. 본 연구에서는 PET 필름에 나노 임프린트 리소그래피 및 핫 엠보싱 공정을 이용하여 moth-eye 반사방지 패턴을 형성함으로써 보호층에서의 입사광 반사를 억제하였다. 또한, 이러한 반사방지 패턴에 초소수성 자기조립단분자막을 코팅하여 표면 에너지를 낮춤으로써 먼지 및 황사에 의해 오염되었을 경우에도 빗물에 의해 오염 물질이 쉽게 씻겨 내릴 수 있는 자정기능을 부여하였다. 이러한 반사방지를 통한 입사광 투과량의 향상 및 초소수성 표면에 의한 자정작용에 의하여 태양전지의 발전 효율이 증가되었다.

  • PDF

$Al_2O_3$/MgO 유전체 보호막의 방전특성 (Discharge Properties of $Al_2O_3$/MgO as a Dielectric Protection Layer)

  • 정진만;신경;이영종;정홍배
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.307-310
    • /
    • 1998
  • In this paper, $Al_2$O$_3$/MgO belayer was prepared with Electron-beam evaporation and the properties of the film was investigated in order to improve the property of MgO film, which is used for the protection layer in PDP(Plasma Display Panel). $Al_2$O$_3$/MgO belayer were improved of roughness and it were condensed by annealing, and the result of XPS analysis for $Al_2$O$_3$/MgO belayer unchanged binding energy. To investigate electric characteristics, discharge properties of $Al_2$O$_3$/MgO belayer were compared with discharge minimum voltage for MgO monolayer through Ar discharge experiments.

  • PDF

Cellulose Nitrate의 알파입자비적특성(粒子飛跡特性) (Characteristics of Alpha Particle Track on Cellulose Nitrate Film)

  • 도진열;전재식;황선태
    • Journal of Radiation Protection and Research
    • /
    • 제9권2호
    • /
    • pp.61-66
    • /
    • 1984
  • Cellulose nitrate 의 ${\alpha}$입자비적특성(粒子飛跡特性), 특(特)히 화학부식조건(化學腐蝕條件)에 따른 ${\alpha}$입자(粒子)의 비적직경(飛跡直徑)을 중심(中心)으로 연구(硏究)하였다. Cellulose nitrate의 KOH 용액부식(溶液腐蝕)때에는 동일(同一)한 부식조건하에(腐蝕條件下)에서 NaOH 경우보다 ${\alpha}$비적직경(飛跡直徑)이 약(約) 3배(培) 크게 나타났다. 그밖에 부식시간(腐蝕時間) 및 ${\alpha}$입자(粒子)의 에너지에 따른 비적직경(飛跡直徑)의 데이타를 얻었고, ${\alpha}$입자(粒子)의 조사조건(照射條件)이 같을 때 흘루언스율(率)(fluence rate)이 부식시간(腐蝕時間)에 무관(無關)함을 알았다.

  • PDF

액체누설 감지용 테이프형 필름센서 (Tape-Type Liquid Leakage Film Sensor)

  • 유동근;김경신;유홍근;한국희;김동준;김정현;한상호;조광섭
    • 한국진공학회지
    • /
    • 제20권2호
    • /
    • pp.146-154
    • /
    • 2011
  • 접착테이프 형태의 액체누설 감지 필름 센서와 이를 이용하고 경보 장치를 포함한 감지 시스템을 개발하였다. 액체누설 감지 필름형 테이프 센서는 베이스 필름층, 전도성 라인층, 보호 필름층으로 구성되며, 테이프의 두께 $300{\sim}500{\mu}m$, 폭 3.55 cm, 그리고 단위 테이프의 길이는 200 m이다. 전도성 라인층의 필름에는 3개의 전도선과 1개의 저항선이 있다. 이들은 도전성 은나노 잉크를 전자인쇄방식으로 설치한다. 이들 저항선과 전도선 사이에 액체가 누설되어 전기적으로 상호 통전되면, 두 선사이의 저항변화를 전압의 변화로 계측하여 누설 위치를 감지한다. 물을 포함한 전도성 액체에 대한 누설 위치 감지에서 길이 200 m에서 오차 범위는 ${\pm}1m$ 이내이다.

대규모 아트리움에 적용되는 수박형성 유리벽의 열적 특성 및 내화성능에 관한 연구 (A Research on Thermal Properties & Fire Resistance of A Water Film Covered Glazing System for Large Atrium Space)

  • 박형주;지남용
    • 한국화재소방학회논문지
    • /
    • 제13권4호
    • /
    • pp.38-55
    • /
    • 1999
  • 열적특성이 비교적 열악한 재료인 유리를 내화성능이 요구되는 방화구획을 이루는 비내력벽에 사용하려는 시포가 국내외적으로 활발하게 진행되고 있는 중에서, 본 연구는 유리표면에 수막을 형성시켜 구획화재시 유리벽이 파열되지 않고 견딜 수 있는 성능을 가질 수 있는 초점을 맞추어 단계적인 실험을 실시하였다. 먼저 수직고가 3M이상인 유리벽에 균일하고도 단절이 없는 수막을 형성할 수 있는 시스템을 고안하여 대형내화로내에서 화염의 세기를 줄이지 않는, 즉 리바운드량이 거의 없는 수막을 형성시킬 수 있도록 제작한 후, 이 시스템을 사용하여 수막이 형성된 유리벽의 열적 특성을 확인하는데 중점을 두고 실험하였다. 다음에는 고안된 시스템을 소형과 대형의 유리벽에 적용시켜 우선적으로는 소형내화로에서 가열하여 기초적인 열적 특성을 조사한 후에 여기서 얻은 데이터를 근거로 실제규모의 실험이 가능한가를 판단한 후에 최종적으로는 2.4M$\times$3M크기의 대형의 유리벽에 수막을 형성한 플러드 노즐형 수막형성유리벽체를 대형내화로내에 거치하여 KS F2257에 의하여 가열하는 내화성능실험을 수행하였다. 실험결과 수막이 왼벽하게 유리면을 도포된 상태에서만 유리가 파열되지 않았으며 이런 수막을 계속적으로 유지하는 데는 많은 변수가 있다는 것을 발견하였으며 또한 수막도포상태의 변화는 내화성능을 보유하는데 있어서 핵심적으로 작용한다는 것을 확인할 수 있었다.

  • PDF

코일 형태로 제작한 박막형 고온초전도 전류제한기의 특성 해석 (Characteristics of a Coil type Fault Curent Limiters using a High-Tc Superconducting Thin Film)

  • 정동철;최효상;박종광;임성훈;고건문;한병성
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제49권8호
    • /
    • pp.418-423
    • /
    • 2000
  • In this paper, we reported the current limiting properties of superconducting fault current limiters (SFCL). Our SFCL was patterned in a coil-type on a YBCO film deposited using rf sputtering techniques and was coated with a gold shunt layer in order to disperse the heat generated at hot spots in the YBCO film. Current increased up to 13.5 Apeak at 60 Hz for the voltage of 11.5 Vpeak, which is the minimum quench point, and increased up to 17.6 Apeak at 60 Hz for the voltage of 80 Vpeak. The quench completion time was 5 msec at 11.5 Vpeak and 4 msec at 80 Vpeak respectively. We think that this architecture using coil-type SFCL can be useful for the protection of the power delivery systems from fault currents.

  • PDF