• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.776-785
• /
• 2006

Ship builder's requirement for a higher power output rating has lead to the development of super large two stroke low speed diesel engines. Usually a large-sized bore ranging from 8-14 cylinders, this engine group is capable of delivering power output of more than 100,000 bhp at maximum continuous rating. Other positive aspects of this engine type include higher thermal efficiency, reliability, durability and mobility. This all playa vital role in meeting the propulsion requirement of vessels, specifically for large container ships, of which speed is a primary concern to become more competitive. Consequently, this also resulted in the modification of engine parameters and new component designs to meet the consequential higher mean effective pressure and higher maximum combustion pressure. Even though the fundamental excitation mechanism unchanged, torsional vibration stresses in the propulsion shafting are subsequently perceived to be higher. As such, one important viewpoint in the initial engine design is the resulting vibration characteristic expected to prevail on the propulsion shafting system(PSS). This paper investigated the torsional vibration characteristics of these super large engines. For the two node torsional vibration with a nodal point on the crankshaft, a tuning damper is necessary to reduce the torsional stresses on the crankshaft. Hence, the tuning torsional vibration damper design and compatibility to the shafting system was similarly reviewed and analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.376-381
• /
• 2009

The increasing needs for higher cargo capacity in the container vessels' fleet has led to ship builder's demand for higher power output rating engine to meet the propulsion requirement, thus, leading to the development of super large two stroke low speed diesel engines. This large sized bore engines with more than 12 cylinders are capable of delivering power output up to more than 100,000 bhp at maximum continuous rating. The thrust variation force due to axial vibration occurring in propulsion shafting of these ships are transmitted to ship structure via thrust bearing. This force may vibrate the super structure of ship in the fore-aft direction and the fatigue strength of crank shaft can be decreased by additional bending stress increase in crank shaft pin and journal. In this paper, the axial vibration of propulsion shafting system on the 14RT-flex96C super large diesel engine with 14 cylinders is identified by theoretical analysis and vibration measurement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.574-575
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.545-546
• /
• 2013

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.378-379
• /
• 2012

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.321-328
• /
• 2015

최근 극지 선박의 수요가 늘어나고 있고 IACS(국제선급연합)에서는 대빙 선박에 대한 새로운 기준이 적용되고 있다. 이 선박에서는 추진시스템에 대한 대빙 설계 기준으로 빙 충격 토크는 프로펠러 날개 수를 중심으로 한 조화 함수로 규정되어 있다. 그러나 실 상황에서는 이러한 주기적인 기진 토크보다는 불규칙한 빙의 충격 토크가 발생할 수 있는 확률이 오히려 크다. 이 논문에서는 비틀림진동이 비교적 큰 6개의 실린더를 갖는 디젤엔진을 주 기관으로 한 추진시스템의 안정성을 검토하고자 한다. 특히 불규칙한 빙 충격 토크와 디젤엔진에서 발생하는 진동토크를 동시에 고려하여 비틀림진동의 공진점을 통과할 과도 비틀림 진동 응답을 이론적으로 해석하였다. 여기서 빙 충격토크는 빙이 프로펠러에 부딪칠 때를 여러 유형별로 가상하여 선급에서 규정된 방법에 의해서 구하였다. 전체적인 시스템의 과도응답 해석은 직접적분방법의 하나인 뉴마크(Newmark) 법을 이용하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.563-572
• /
• 2001

With the results of calculation for natural frequencies the reponses of forced coupled vibration of propulsion shafting system were investigated by the modal analysis method. For the forced vibration response analysis, the axial exciting forces, the axial damper/detuner, propeller exciting forces and damping coefficients were extensively considered. As the conclusion of this study, some items are cleared as follows.-The torsional vibration amplitudes are not influenced by the radial excitation forces of the crank shaft. -The axial vibration amplitudes are influenced by the tangential exciting forces as well as the radial exciting forces of the crank shaft. The increase of the amplitudes is observed in the speed range at the neighbourhood of any torsional critical speed. 1The closer the torsional and axial critical speed. the larger coupling effect becomes. -The axial exciting force of propeller is relatively strong comparing with axial exciting forces of cylinder gas pressure and oscillating inertia of reciprocating mechanism. Therefore, the following conclusions are obtained. -Torsional vibration calculation with the classical one dimensional model is still valid. -The influence of torsional excitation at each crank upon the axial vibration is improtant. especially in the neighbourhood of a torsional critical speed. That means that the calculation of axial vibration with the classical one dimensional model is inaccurate in most of cases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.1018-1025
• /
• 2003

The diesel engine is often a serious excitation source in ships. Both the varying cylinder gas forces and the reciprocating and rotating mass forces associated with the crank and the connecting rod mechanism produce ample possibilities for excitation of the engine structure itself, the shafting, the surrounding substructures as well as the hull girder. This paper presents a guide for optimization of excitation forces produced by the marine propulsion 2-stroke diesel engine. The computational program for predicting the excitation forces is developed and applied to 2-stroke in-line engines. The object function is defined as the work done by every cylinder excitation force which is related to the mode shape of the diesel engine system, especially in the torsional vibration of the shafting. As a practical application of the presented method, the crank angle of 7 cylinder 2-stroke engine is optimized to reduce torsional vibration stresses on the shafting. Compared with the regular firing angle, about 60% of the 4th order torsional vibratory stress on the propeller shaft can be reduced by optimizing the crank angle irregularly. The usefulness of the presented optimization method is confirmed by the measurements.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.709-717
• /
• 2004

The diesel engine is often a serious excitation source in ships. Both the varying cylinder gas forces and the reciprocating and rotating mass forces associated with the crank and the connecting rod mechanism produce ample possibilities for excitation of the engine structure itself, the shafting, the surrounding substructures as well as the hull girder. This paper presents a guide for optimization of excitation forces produced by the marine propulsion 2-stroke diesel engine. The computational program for predicting the excitation forces is developed and applied to 2-stroke in-line engines. The object function is defined as the work done by every cylinder excitation force which is related to the mode shape of the diesel engine system, especially in the torsional vibration of the shafting. As a practical application of the presented method. the crank angle of 7 cylinder 2-stroke engine is optimized to reduce torsional vibration stresses on the shafting. Compared with the regular firing angle, about 60 ％ of the 4th order torsional vibratory stress on the propeller shaft can be reduced by optimizing the crank angle irregularly. The usefulness of the presented optimization method is confirmed by the measurements.

• 해양환경안전학회지
• /
• 제13권4호
• /
• pp.119-125
• /
• 2007

현재 중소형선박의 동력전달용 스테인리스 추진축계가 많이 사용되고 있으나 선미를 통과하는 선미관 패킹부, 베어링이 작용하는 접촉부 등에서 마모, 축의 재질불량이나 설계 불량으로 인하여 축이 절손되는 경우가 많다. 프로펠러축이 과다마모 또는 절손으로 파단시 새로운 축으로 전환하고 있으나 축을 새것으로 구입하려면 주문, 제작 등에 따라 상당한 비용이 소요된다. 또한 축을 육성 용접하는 경우는 해양수산관청의 승인을 득하도록 되어 있으나 지금까지 승인이 된 경우가 없었다. 따라서 이 연구에서는 직접 스테인리스 재료를 육성 용접하면서 모재와 비교하여 용접에 따른 금속조직의 변화, 결함의 계측 등을 규명하여 해양수산관청의 승인에 필요한 용접 절차, 검사에 필요한 사항 등을 검토하였다.