• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1862-1866
• /
• 2003

A control system design with Coefficient Diagram Method (CDM) is proven that effective for SISO control design. But the control system design for MIMO via CDM is not concrete procedure. In this paper presents the control system design method for quadruple-tank process via CDM. By using the decentralized method for both non-minimum phase and minimum phase are made. The results from Integral-Proportional (I-P) controller’s design via CDM and standard Proportional-Integral (PI) controls are also shown to compare the merits of the proposed controllers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.476-478
• /
• 1996

This paper is on speed control of induction motor using space vector PWM. Indirect vector control which controls independantly flux and torque current component in order to drive induction motor, is applied for driving motor. Voltage sourced inverter with space vector PWM is used to generate the practically perfect sinusoidal flux density in induction motor. The appropriateness of speed control is proven by appling IP(Integral-proportional) controller which is known to have a good speed response and still to have less overshoot than the now used PI(Proportional-Integral) controller.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.280-290
• /
• 2008

This paper deals with an investigation and evaluation of the performance of a state observer based Permanent Magnet Synchronous Motor (PMSM) drive controlled by PI (Proportional Integral), PID (Proportional Integral and Derivative), SMC (sliding mode control), ANN (Artificial neural network) and FLC (Fuzzy logic) speed controllers. A detailed study of the steady state and dynamic performance of estimated speed and angle is given to demonstrate the capability of the controllers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.1946-1958
• /
• 2011

Wireless Sensor Network (WSN) is made up of a number of sensor nodes and base stations. Traffic flow in WSN appears self-similar due to its data delivery process, and this impacts queue length greatly and makes queuing delay worse. Active queue management can be designed to improve QoS performance for WSN. In this paper, we propose self-similar traffic rate estimating algorithm named Power-Law Moving Averaging (PLMA) to regulate packet marking probability. This algorithm improves the availability of the rate estimation algorithm under the self-similar traffic condition. Then, we propose an adaptive Proportional Integral algorithm (SSPI) based on the estimation of the Self-Similar traffic rate by PLMA. Simulation results show that SSPI can achieve lower queue length jitter and smaller setting time than PI.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.133-146
• /
• 2004

Recently, many active queue management (AQM) algorithms have been proposed to address the performance degradation. of end-to-end congestion control under tail-drop (TD) queue management at Internet routers. However, these AQM algorithms show performance improvement only for limited network environments, and are insensitive to dynamically changing network situations. In this paper, we propose an adaptive queue management algorithm, called PID-controller, that uses proportional-integral-derivative (PID) feedback control to remedy these weak-Dalles of existing AQM proposals. The PID-controller is able to detect and control congestion adaptively and proactively to dynamically changing network environments using incipient as well as current congestion indications. A simulation study over a wide range of IP traffic conditions shows that PID-controller outperforms other AQM algorithms such as Random Early Detection (RED) [3] and Proportional-Integral (PI) controller [9] in terms of queue length dynamics, packet loss rates, and link utilization.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1235-1244
• /
• 2017

This paper proposes a fuzzy logic controlled new topology of high voltage gain zero voltage switching (ZVS) asymmetrical PWM full-bridge DC-DC boost converter for constant load and high power applications. The APWM full-bridge stage provides high voltage gain and soft-switching characteristics increase the efficiency and reduce the switching losses. Fuzzy logic controller (FLC) improves the performance and dynamic characteristics of the proposed converter. A comparison with a classical proportional-integral (PI) controller demonstrates the high performances of the proposed technique in terms of effective output voltage regulation under different operating conditions. Simulation is done by integrating two different simulation platforms $PSIM^{(R)}$ and $Matlab^{(R)}/Simulink^{(R)}$ by using SimCoupler tool of $PSIM^{(R)}$. Experimental results using 120W load have been provided to validate the results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.387-390
• /
• 1996

In this paper, A new PI-type reaching law for variable structure control is proposed to alleviate the chattering and improve the robustness properties in the presence of matched uncertainty. The proposed reaching law consists of a proportional term and an integral term. And the dynamics of switching function can easily be specified by using the second-order system analysis method. And also the proposed scheme has the advantages of alleviating the chattering than Gao's one and reducing the influence of uncertainties by band pass filter characteristic. The efficiency of the proposed method has been demonstrated by simulations for Dutch Roll damping in a light aircraft.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.671-677
• /
• 1999

In this paper, we have designed power system stabilizer (PSS) using object-oriented method. There are several types of power system stabilizer. A proportional-integral(PI) controller is very simple for practical implementation. Therefore it has been widely employed by the industry. The methods of obtaining the gains(Ki,Kp) of PI controller are root-locus method and sub-optimal regulator approach. But these methods are cannot be applicable to nonlinear system and faulted power system. So we proposed a new method which can be applied to nonlinear system by numerical analysis method. The method of dynamic system simulation by numerical method is very difficult and complex. We proposed flexible simultaion method for complex power system analysis using object-oriented programming(OOP) and applied to PI controller design.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.602-603
• /
• 2010

This paper presents a comparison and evaluation between different anti-windup proportional-integral (PI) controller strategies used in variable-speed motor drives, and the anti-windup methods are to the speed control of a vector-controlled induction motor driven by a pulse width modulated (PWM) voltage-source inverter (VSI). The simulation results are compared for the different operating conditions and the characteristic of speed response has been analyzed in order to obtain the optimal performance of anti-windup PI controller method.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1068-1076
• /
• 2004

Technology on the proportional integral (PI) control have grown rapidly owing to the needs for the robust capacity of the controllers from industrial building sectors. However, PI controller requires tuning of gains for optimal control when the outside weather condition changes. The present study presents the possibility of reinforcement learning (RL) control algorithm with PI controller adapted in the HVAC system. The optimal design criteria of RL controller was proposed in the Environment Chamber experiment and a theoretical analysis was also conducted using TRNSYS program.