• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.389-394
• /
• 2011

In many parts of the world, low cost housing used to be built and maintained by the governments, based on designs and detail specifications prepared by the public sector with construction carried out by contractors. Results vary due to differences in design standards, workmanship and property management, depending also on the neighbourhood's care of the estates and their pattern of usage. In the UK, where Private Finance Initiative (PFI) has been used for infrastructure projects, there have been successful cases of city estate being transformed by PFI. These PFI housing schemes involve new-build, refurbishment as well as facility management. Unlike traditional construction, which is based on prescriptive specifications, PFI housing is based on output specifications. A study has been undertaken to compare the two specification approaches as they are applied to housing estate. Results are enlightening and serve as good reference to cities such as Hong Kong SAR and Singapore, where public housing provisions have been a major concern of their citizens as the building stock gets older.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.490-494
• /
• 2008

U-Channel Bridge is effective bridge type, because its edge beam performs role of barrier and enables to reduce additional dead loads. Although it is effective to reduce additional dead loads, there is possibility of bridge collapse under impact load due to car crash. Also, edge beam must have ability to induce safe driving and prevent falling accidents. Therefore, it requires behavior analysis and property investigation through the vehicle impact crashing edge beam. This study presents method of structural analysis of U-channel bridge and investigates design specifications for the effect of the edge beam under the vehicle impact. Also, it carries out stability investigation of behavior of edge beam and slab, based on Korean Highway Bridge Design Specifications and AASHTO LRFD Bridge Design Specification.

• Journal of Construction Engineering and Project Management
• /
• 제1권2호
• /
• pp.43-48
• /
• 2011

In many parts of the world, low cost housing used to be built and maintained by the governments, based on designs and detail specifications prepared by the public sector with construction carried out by contractors. Results vary due to differences in design standards, workmanship and property management, depending also on the neighbourhood's care of the estates and their pattern of usage. In the UK, where Private Finance Initiative (PFI) has been used for infrastructure projects, there have been successful cases of city estate being transformed by PFI. These PFI housing schemes involve new-build, refurbishment as well as facility management. Unlike traditional construction, which is based on prescriptive specifications, PFI housing is based on output specifications. A study has been undertaken to compare the two specification approaches as they are applied to housing estate. Results are enlightening and serve as good reference to cities such as Hong Kong SAR and Singapore, where public housing provisions have been a major concern of their citizens as the building stock gets older.

• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.140-148
• /
• 2012

This study aims to provide power monitoring system for super tall buildings with 3D BIM (Building Information Modeling) technology. In order to realize this subject, standard specifications for BIM objects and attributes were studied through analyzing processes and elements of electrical utilities for power management systems applied for super tall buildings. These standard BIM specifications could be used by designers, contractors and facility operators, and thus could be helpful to realize BIM information sharing between multiple disciplines and construction phases. And further study has been suggested to develop standard specification and applications from this study.

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1598-1603
• /
• 2000

In this paper, an efficient pulse shaping filter architecture for SSB/BPSK-DS/CDMA is proposed. The filter satisfies the specifications in IS-95. The proposed architecture is based on polyphase decomposition and look-up table method. By exploiting the linear phase property of the decomposed filter coefficients, the chip area required for look-up table can be reduced by half compared with the conventional methods. By Synopsys simulations, it is shown that the use of the proposed method can result in reduction in the number of gates by 40%.

• 연구논문집
• /
• 통권24호
• /
• pp.119-128
• /
• 1994

A special steels have been developed for the possible applications of turbine blade in nuclear power plant. The compositions of developed alloy were selected by the reference of imported alloy. The various properties such as tensile property, impact energy, hardness, and microstructures were investigated. All the properties of optimum heat treated materials were satisfied with the present specifications of turbine blade materials in unclear power plant. Furthermore, FATT(Fracture appearance transition temperature), high temperature tensile properties, and transformation temperatures of developed alloy also have been studied.

• 소성∙가공
• /
• 제13권3호
• /
• pp.242-247
• /
• 2004

Literature review on reliability test method for developing high performance optical/thermofluidic components. Since the miniaturization by the conventional mechanical process is limited to milli-structure, i.e. $10^{-3}m$, new technology for fabricating of mechanical components is needed to match cost, reliability, and integrability criteria of micro-structure. Although numbers of various researches on MEMS/MOEMS devices and components, including material characterization, design and optimization, system validation, etc., the lack of standards and specifications make the researches and developments difficult. For that reason, this paper is intended to propose the methods of reliability test for measuring the mechanical property of optical/ thermofluidic components.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.97-100
• /
• 2000

Deadbeat property is well established in digital control system design in time domain. But in continuous time system, deadbeat is impossible because of it's ripples between sampling points. But several researchers suggested delay elements. From some specifications such as Internal model stability, physical realizations and finite time settling, unknown polynomials with delay elements in error transfer functions can be calculated. For the application to the real system, robustness property can be added. In this paper, error transfer function is specified with 1 delay element and unkown coefficients are calculated from the specs. Especially, by varying settling time and the user-specified poles, a deadbeat controller with lower order is obtained.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.169-176
• /
• 2000

유한정정 특성은 시간영역에서 디지털 제어시스템 설계를 위해 잘 정립이 되어 있다. 그러나 연속시간 제어시스템에서는 유한정정 특성은 불가능한데, 그 이유는 디지털 제어시스템에서 사용하는 이론으로 유한정정 특성을 나타내게 설계하여도 샘플링점에서는 유한정정이 되나, 샘플링점간에 리플이 존재하기 때문이다. 그러나 몇몇 학자들이 지연요소를 제안하여 이러한 문제를 해결하였다. 지연요소는 연속계에서 유한라플라스변환의 성질로부터 얻은 개념이다. 유한정정제어기 설계를 위해서는 유한정정외에 내부모델안정성, 실현가능성 등의 조건들을 추가로 설정하고, 이런 조건들이 만족되게 오차 전달함수의 미지계수, 팍점 등을 구할 수 있다. 지연소자로 된 미지 다항식을 계산할 수 있다. 실시스템에 대한 적용을 위해서는 이러한 조건외데 견실성에 관한 조건이 첨가될 수 있다. 본 논문에서는 1개 지연요소를 사용하여 오차전달함수를 표시하고, 유한정정에 관련된 조건들외에 견실성을 고려한다. 견실성의 지표로는 가중감도함수를 선택하고, 이의 $H_{infty}$놈이 최소가 되도록 유한정정제어기를 설계한다. 즉 오차전달함수의 극점을 초기값을 계속 사용하지 않고 견실성지표의 $H_{infty}$놈이 최소화되도록 극점을 최적화하여 최적설계를 한다.

• 한국의류학회지
• /
• 제34권1호
• /
• pp.167-174
• /
• 2010

This paper aims to examine the status of sizing specifications for disposable sanitary pads on the market and to offer information on product design that reflect the requests of consumer by gathering opinion through the practical experience of consumers. Seventy-six varieties of sanitary pads on market are measured and the evaluations of wearing comfort were investigated by the questionnaire and interview for sixty three varieties of sanitary pads. As a result, they were classified into five sizes related with length but vaguely related with thickness and width. Thickness is distinguished by the compressibility that is marked as slim or ultra slim by the same brand. However, there is no sizing consistency for all products. The result shows that there is some confusion for consumers to choose desired sizes, In addition, the perception of wearing is categorized into four factors that are product performance, size and fit, wearing feeling and margin of action, and adhesive property and wrapping. The manufacturing specifications for the sanitary pads on domestic market, the requests of consumers for sanitary pad design modifications, and proposals for follow-up studies were figured out through this research.