• 한국지반공학회논문집
• /
• 제37권4호
• /
• pp.5-17
• /
• 2021

본 논문은 만곡부 제방에 대해 곡률각도, 곡률반경에 따라 3차원 해석을 실시하여 침투특성을 규명하였다. 제방만곡부에서 동수경사는 2차원 해석 결과에 비해 외측제방에서는 감소하였고, 내측제방에서는 증가하였다. 곡률각도와 곡률반경이 작을수록 2차원 해석 대비 동수경사의 변화가 큰 경향을 나타내었으며, 곡률각도보다는 곡률반경이 동수경사에 미치는 영향이 큰 것으로 나타났다. 한계동수경사에 의한 파이핑 안전율 산정결과, 2차원 해석에 대비하여 안전율은 외측제방에서는 2~5%가 증가되었고, 내측제방에서는 4~12%가 감소되었다. 이 감소폭을 고려해 볼 때 제방만곡부에 대해 2차원 해석을 실시하고 파이핑에 대한 허용안전율 Fs=2.0보다 0.1~0.3정도 더 크게 설계하면 만곡부의 안전율은 약간 감소되지만 안정성 확보에는 무리가 없는 것으로 판단되었다.

• 한국CDE학회논문집
• /
• 제12권3호
• /
• pp.220-232
• /
• 2007

Current geometric modeling and analysis are commonly based on B-Rep modeling and a finite elements method respectively. Furthermore, it is difficult to represent an object whose material property is heterogeneous using the B-Rep method because the B-Rep is basically used for homogeneous models. In addition, meshes are required to analyze a property of a model when the finite elements method is applied. However, the process of generating meshes from B-Rep is cumbersome and sometimes difficult especially when the model is deformed as time goes by because the topology of deforming meshes are changed. To overcome those problems in modeling and analysis including homogeneous and heterogeneous materials, we suggest a unified modeling and analysis method based on implicit representation of the model using R-function which is suggested by Rvachev. For implicit modeling of an object a distance field is approximated and blended for a complex object. Using the implicit function mesh-free analysis is possible where meshes are not necessary. Generally mesh-free analysis requires heavy computational cost compared to a finite elements method. To improve the computing time of function evaluation, we utilize GPU programming. Finally, we give an example of a simple pipe design problem and show modeling and analysis process using our unified modeling and analysis method.

• 자원환경지질
• /
• 제22권2호
• /
• pp.129-139
• /
• 1989

The anthracite coalfields of Korea are confined to the areas where sedimentary rocks of Permian and Jurassic are preserved. The Chungnam coalfield lies in the sedimentary rocks of Jurassic which belongs to the Daedong Supergroup (the Nampo group). For the property analysis of each coal seam interbeded in Daedong Supergroup, Seongju area is chosen and twelve coalseams are taken. Many standard tests have been established for optical analysis (maceral analysis, coalification degree measurement), chemical analysis (proximate, ultimate analysis) and physical analysis (ignition temperature, ash fusion temperature, hardgrove grindability index and X-ray diffraction). The Jurassic anthracite mainly consist of vitrinite and macrinite and the range of the reflectance is $R_{max}$ 5.0-6.5 which means metaanthracite rank. By the chemical composition analysis, it shows low H/C and high O/C value compare with international average value. By the physical analysis, it has very high ignition temperature ($531-584^{\circ}C$) and ash fusion temperature ($1510-1700^{\circ}C$) and very low combustion velocity (0.2-1.9 mg/min). The very wide range of the hardgrove grindability index (46-132) means that the grindability controlled mainly by the structural conditions of coal bearing strata.

• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.7-12
• /
• 2006

Recently, the fractal interpolation methods have been widely introduced and used to estimate and analyze various theoretical and experimental data. Because of the chaotic behaviors of dynamic cutting force data, some method for end-milling force analysis must be used. The fractal analysis used in this paper is fractal linear interpolation and fractal dimension. Also, several methods for computing fractal dimensions have been used in which the fractal dimension of the typical dynamic end-milling force was calculated according to number of data points that are generally lower than 200 data points sampled. This fractal analysis shows a possible prediction of end-milling force that has some dynamic chatter property or stationary property in endmilling operation.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.18-26
• /
• 1996

A two dimensional thermo elasto-plastic finite element stress analysis was performed to study residual stress distributions in AI composites reinforced by SiC whisker and $ZrO_2$ ceramic joints. The influences on the residual stress distributions due to the difference of the reinforcement volume fraction and interlayer material property were investigated. Specifically, stress distributions between AI interlayer material property were investigated. Specifically, stress distributions between AI interlayer and $ZrO_2$ ceramic and between the AI interlayer and AI composite were computationally analzed.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.76-82
• /
• 2009

In this papers, Study on the Bonding property and Strength Evaluation in Bonding interface Joints of Dissimilar material using DOE. We found optimal condition that uses experimental design method (Response Surface Analysis, DOE) used temperature, pressure, time on experiment factor. And we could get bonding condition and strength that break and crack do not happen in mechanical processing about united dissimilar material. And progress 3 point bending tests and verified result.

• 한국소음진동공학회논문집
• /
• 제19권5호
• /
• pp.462-467
• /
• 2009

Reduction of the structure-borne noise of the naval vessel is very important in order to reduce the underwater radiated noise of it. One of the important factors to reduce the structure-borne noise of the installed machine in a ship is the design of the foundation having sufficiently high mechanical impedance. In this paper, the mechanical impedance of the foundation for the fan-coil unit in a naval vessel is evaluated numerically according to variation of the thickness of the foundation. And also, the forced vibration analysis is conducted considering the dynamic property of the anti-vibration mount. Through the analysis results, it can be known that the dynamic property of the anti-vibration mount should be considered when the minimum level of the mechanical impedance of the foundation is set.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.395-398
• /
• 2002

This study is to examine the safety by analizing the hardness of bed and the characteristic of vibration to improve basic efficiency of machine-tool of drill-cell which is a high line center. The mistake of existing design was shown through the analysis of 3-D and structure. The purpose of this paper is to draw up a plan to improve performance and to propose the design method through finding out the optimum by analyzing dynamic property of structure in a quantity-way by CAE for a quantity-analogy of dynamic property in design steps.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.201-217
• /
• 1998

This paper attempts to show how DEA(data envelopment analysis), a nonparametric productivity analysis method, can be employed for insurance companies to improve their respective efficiencies and competitiveness. Specifically, we measured relative technical efficiencies and returns to scale of 11 Korean property-liability insurance companies using BCC model, and raised several issues including the cause of inefficiency, benchmarking toward reference set and resource allocation concerning the insurance companies. Also, in order to monitor the variability of the research results over periods, we employed longitudinal analysis to see the moving patterns of technical efficiencies, returns to scale and frequencies included in the reference set of the individual insurance companies under consideration. The methodology and the results in this paper may also serve as a useful guideline for individual insurance companies to set their respective business strategies.

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.9-17
• /
• 2004

Nowadays, a concern of building environment has been arousing. Furthermore, according to this trend, the social concern has expended continuously. Especially, the right of daylight is essential for both the pleasant life and building maintenance. In this reason, it has dealt as like property right. Therefore, the Infringement on the right of daylight can be applicable to the infringement of property right. However, few un-notarized calculation methods have been used without careful examination about daylight duration calculation methods which can be used for determine sunshine infringement as the dispute solution, therefore. In this thesis We analyzed and concluded the differentiations of two calculation methods which are using nowadays.