• Communications of the Korean Mathematical Society
• /
• v.25 no.2
• /
• pp.257-262
• /
• 2010

Let f be a $C^2$-diffeomorphism on a closed surface which satisfies the Axiom A. Then f is in the $C^2$-interior of the set of all diffeomorphisms having the inverse shadowing property with respect to the class of the continuous methods if and only if f satisfies the strong transversality condition.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.1
• /
• pp.12-17
• /
• 2018

We investigated the corrosion behavior of commercially pure cold working processed (CP)-Ti with coarse-grained (CG) microstructure heat-treated at $400^{\circ}C$ and $600^{\circ}C$, respectively. It is observed that corrosion resistance of as-received CP-Ti heat-treated at $400^{\circ}C$, at which recrystallization proceeds, is largely improved. Interestingly, the mechanical property of CP-Ti sample at $400^{\circ}C$ was scarcely deteriorated. It is attributed to the decrease of the defects such as strain variance and dislocation density. On the other hand, the annealing treatment at $600^{\circ}C$ of CP-Ti plate causes to grain growth with the noticeable reduction of mechanical property. Hence, it is considered that defect density such as strain and dislocation density is important microstructural parameter for the improvement of corrosion resistance. The introduction of proper annealing treatment can help to improve corrosion resistance without scarifying mechanical property of CP-Ti.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.863-869
• /
• 2004

The purpose of this research is to investigate the mechanical property and ductile-brittle transition temperature of Ti-Nb-P added extra low carbon interstitial free steel having a tensile strength of 440 MPa. The mechanical property and transition temperature of hot rolled steel sheets were more influenced by the coiling temperature rather than by the small amount of alloying element. Further, at the same composition, the property of the specimen coiled at low temperature was superior to that obtained at higher coiling temperature. The fracture surface of 0.005C-0.2Si-1.43Mn steel coiled at $630^{\circ}C$ showed a ductile fracture mode at $-100^{\circ}C$, but coiling at $670^{\circ}C$ showed a transgranular brittle fracture mode at $-90^{\circ}C$. The galvannealed 0.006C-0.07Si-1.33Mn steel sheet annealed at $810^{\circ}C$ has tensile strength and elongation of 442.8 MPa and $36.6\%$, respectively. The transition temperature of galvannealed 0.006C-0.07Si-1.33Mn steel sheet was increased with a drawing ratio, and the transition temperature of the galvannealed 0.006C-0.07Si-1.33Mn steel was $-60^{\circ}C$ at a drawing ratio of 1.8

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.11
• /
• pp.777-783
• /
• 2012

The hardness and strength test was performed to make the manufacturing process of SA213 P92 boiler pipe steel. And the microstructure change was studied to find out the cause of room temperature property of P92 steel, ie, low hardness and strength property. The room temperature property of P92 steel depends on the improper normalizing and cooling rate. Especially, Ferrite was formed and the steel had low hardness when the temperature was decreased slowly under the cooling rate $1^{\circ}C$/min after normalizing at the temperature around $A_{c1}$ to $A_{c3}$. The critical heat treatment temperature and cooling rate was over $900^{\circ}C$ and over $10^{\circ}C$/min to satisfy the minimum yield and tensile stress which was laid down by ASME Code.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.126-129
• /
• 1999

Dielectric and piezoelectric properties of perovskite materials such as La modified $Pb(Zr,Ti)O_3$ ceramics and $Pb(Zn_{1/3}Nb_{2/3})O_3-PbTiO_3$ single crystals were investigated for cryogenic capacitor and actuator applications. Enhanced extrinsic contributions resulted in piezoelectric coefficient (d33) as high as 250 pC/N at 30 K, superior to that of PZT ($d_{33}$ ~ 100 pC/N). This cryogenic property enhancement was associated with retuning the MPB (or cryogenic temperatures. PZN-PT single crystals exhibited dramatic property improvements such as $d_{33}$ > 500 pC/N at 30 K as a result of an engineered domain state.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1472-1482
• /
• 2017

Zirconium alloy cladding tube specimens were irradiated at $380^{\circ}C$ up to a fast neutron fluence of $7.5{\times}10^{24}n/m^2$ in a research reactor to investigate the effect of neutron irradiation on hydride reorientation and mechanical property degradation. Cool-down tests from $400^{\circ}C$ to $200^{\circ}C$ under 150 MPa tensile hoop stress were performed. These tests indicate that the irradiated specimens generated a smaller radial hydride fraction than did the unirradiated specimens and that higher hydrogen content generated a smaller radial hydride fraction. The irradiated specimens of 500 ppm-H showed smaller ultimate tensile strength and plastic strain than those characteristics of the 250 ppm-H specimens. This mechanical property degradation caused by neutron irradiation can be explained by tensile hoop stress-induced microcrack formation on the hydrides in the irradiation-damaged matrix and subsequent microcrack propagation along the hydrides and/or through the matrix.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.9
• /
• pp.3015-3029
• /
• 1996

The notion of effective transport property of a heterogeneous medium implies that the medium is large enough that the ergodic theorem holds and local fluctuation of the property can be neglected. In case that the medium is not large enough compared to its characteristic microstructure length scale, the effective property fluctuates and differs from the value of the medium being large enough. As a representative transport phenomenon, diffusion was considered and the fluctuation of varying effective diffusion property, diffusion coarseness $C_k$, was defined as a quantifying parameter. Scaled effective diffusion property, $^*$>/k$_1$ and $C_k$ were computed for the two phase random media consisting of matrix of diffusion coefficient k$_1$ and spheres of diffusion coefficient k$_2$. Numerical simulations were performed by use of the so-called first passage time technique and data were collected for existing microstructure models of hard spheres(HS), overlapping spheres(OS) and penetrable concentric shells(PCS).

• Journal of the Korean Mathematical Society
• /
• v.42 no.4
• /
• pp.773-793
• /
• 2005

We consider interesting conditions, one of which will be called the disjoint $(A^2,\;D^2)-pair$ property, on genus $g{\geq}2$ Heegaard splittings of compact orient able 3-manifolds. Here a Heegaard splitting $(C_1,\;C_2;\;F)$ admits the disjoint $(A^2,\;D^2)-pair$ property if there are an essential annulus Ai normally embedded in $C_i$ and an essential disk $D_j\;in\;C_j((i,\;j)=(1,\;2)\;or\;(2,\;1))$ such that ${\partial}A_i$ is disjoint from ${\partial}D_j$. It is proved that all genus $g{\geq}2$ Heegaard splittings of toroidal manifolds and Seifert fibered spaces admit the disjoint $(A^2,\;D^2)-pair$ property.

• Journal of Korea Foundry Society
• /
• v.35 no.4
• /
• pp.88-98
• /
• 2015

The effects of quenching and tempering temperatures on the tensile, impact and corrosion properties of A487 alloy cast with different C contents of 0.16, 0.19 to 0.23 wt.% were examined. The impact tests were conducted at $25^{\circ}C$ and $-60^{\circ}C$ and the immersion test was performed using 3.5% NaCl solution for 14 days. The quenching temperature affected the mechanical properties of A487 alloy cast, while the magnitude of change varied depending on the C content. The increase in tempering temperature showed the typical trend of decreasing tensile strength and increasing impact properties. The change in quenching and tempering temperature in this study did not affect the corrosion properties of A487 alloy significantly. The change in mechanical and corrosion properties of A487 with different C contents was discussed based on the microstructural and fractographic observation.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.206-213
• /
• 2015

This study was carried out to use carbonized medium density fiberboard (MDF) for the replacement of sound absorbing material. Carbonization treatment was performed to improve sound absorption property for MDF at carbonizing temperatures of $500^{\circ}C$, $700^{\circ}C$, $900^{\circ}C$ and $1100^{\circ}C$. As the carbonization temperature increased, the results of the observation by scanning electron microscope (SEM) demonstrated that the fibers exhibited a more compressed morphology within the surface section of the MDF than those within the middle section of MDF. As the carbonizing temperature increased, the cavity increased. The sound absorption coefficient increased between the temperatures of $500^{\circ}C$ and $900^{\circ}C$, but decreased at a temperature of $1100^{\circ}C$. The sound absorption properties of the carbonized MDF and the non-carbonized MDF were compared. The maximum sound absorption coefficient of the carbonized MDF was 12.38%. This was almost double of the value of the non-carbonized MDF.