• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2067-2069
• /
• 1998

A prototype semiconductor switch for the command resonant charging system has been developed for a line type modulator, which charges parallel pulse forming network(PFN) up to voltage of 5 kV at repetition rates of 60 Hz. A phase controlled power supply provides charging of the 4.7 ${\mu}s$ filter capacitor bank to voltage up to 5 kV. A solid state module of series stack array of sixe matched SCRs(1.6 kV, 50 A) is used as a command charging switch to initiate the resonant charging cycle. Both resistive and RC snubber network are used across each stage of the switch assembly in order to ensure proper voltage division during both steady state and transient condition. A master trigger signal is generated to trigger circuits which are transmitted through pulse transformer to each of the 6 series switch stages. A pulse transformer is required for high voltage trigger or power isolation. This paper will discuss trigger method, protection scheme, circuit simulation, and test result.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1013-1014
• /
• 2006

Mobilecomputer offers more fundamental role than role assistance enemy of modern technology equipment and new Information Technology can reconsider, and reconstruct creatively accuracy of physiological concept. That military register symptoms are developed of disease, before far before rehalibitation, offer possibility that can intervene in process that motive change of military register symptoms after rehalibitation. But, that many parameters become analysis target and mathematical settlement and equalization system of neted data of that is huge, same time collection of all datas can lift difficulty etc.. These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that is done radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can

• 전력전자학회논문지
• /
• 제20권5호
• /
• pp.421-428
• /
• 2015

An advanced direct torque control (DTC) with pulse width modulation (PWM) method is presented in this paper. The duty ratio calculation of the selected voltage vector is based on the voltage functions of the selected voltage vector according to the sector angle. The proposed DTC uses a conventional DTC scheme with six sector divisions and switching rules. However, the winding voltages are supplied by the PWM approach. Furthermore, the duty ratio of the switching voltage vector is determined by the flux, torque error, and motor speed. The base voltage that shall determine the duty ratio can be calculated by approximate voltage functions according to the voltage angle. For the calculation of base voltages, second-order quadratic functions are used to express the output voltage of the selected voltage vector according to voltage angle. The coefficients for the second-order quadratic functions are selected by the voltage vector, which is determined by the switching rules of the DTC. In addition, the voltage functions are calculated by the coefficients and voltage angle between the voltage vector and rotor position. The switching voltages from the calculated duty ratio can supply the proper torque and flux to reduce the ripple and error. The proposed control scheme is verified through practical experimental comparisons.

• KIEAE Journal
• /
• 제3권3호
• /
• pp.59-66
• /
• 2003

From an sustainable perspective, one unique characteristic of Open Housing is its ability to individualize variable elements (infill) from the permanent elements (support) in accordance with the residents' needs. Such environment-friendly elements of Open Housing can contribute to increasing the life span of the building, reducing the scope of reconstruction, and minimizing the amount of disposed building materials during demolition. The purpose of this research is to analyze the flexibility concept from a typological perspective, so that the concept of open housing can be better understood and its development can be promoted. The main method of this study was content analysis. Based on literature review of flexibility concept in a typological approach, a primary categories were established to describe the flexibility concept such as time for flexibility, scope, and the degree of openness. Subsequently each criterion was elaborated as follows: planning, supply, and utility in the time stage; internal and external flexibility in its scope; and fixed, semi-free, and free flexibility in its openness degree. This research exposes the lack of comprehensive knowledge of Open Housing caused by rather uniform features of previous studies. This research establishes and promotes a systematic approach for a more holistic meaning of Open Housing. This approach should contribute to the proper utilization and further development of sustainable housing.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.149-154
• /
• 2007

The engine behavior in a transient condition is important to not only emission regulations but also fuel economy. A fast response gas analyzer can be a useful tool to investigate exhaust gas in a transient operation. It should be designed to analyze gas concentration with a short time constant by a fast sampling module and an appropriate measuring method for each emission element. In this study, a new fast sampling module is introduced and flow analysis is performed by numerical simulation. The analysis has shown the proper operating condition and the sensitivity of the module for practical application. Calculated flow to the sampling module has $0.5{\sim}4%$ error, while backflow toward the expansion tube is expected when pressure in CP (Constant Pressure) chamber is over 0.6 bar. For a stable supply of flow to the optical cell, sample gas pressure should be in the range, $0.35{\sim}1.90$ bar, when the pressure in the CP camber and the optical cell are 0.2 bar and 0.158 bar, respectively.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.31-36
• /
• 2008

배수시설은 합리적인 계획으로 배치하여 시간적으로 변동하는 수요량에 대하여 적정한 수질의 물을 적정한 압력으로 연속적이면서 안정적으로 공급해야 한다. 또한 상수관 파괴 같은 사고가 발생했을 경우에도 용수 수요자에 대한 영향을 최소화 할 수 있는 안정성이 높은 시설을 목표로 구축되어야 한다. 본 연구에서는 상수관 파괴에 의한 피해를 합리적으로 경감시킬 수 있는 방법을 제시하였다. 본 연구를 위해 기존의 상수관 파괴에 의한 피해영역 산정기법과 신뢰도 산정기법을 통해서 상수관망을 분석하고 상수관 파괴에 의한 피해 경감기법을 도출하였다. 분석결과 minimum cutset에 속하는 상수관의 내구성을 중요우선순위에 따라 향상시킴으로써 상수관 파괴에 의한 피해를 효과적으로 경감시킬 수 있었으며 제안된 방법을 Cherry Hill 상수관망에 적용하여 적용성을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제7권10호
• /
• pp.867-873
• /
• 2001

The purpose of this study is to find analytic solution of determining the optimal capacity (lot-size) of multiproduct acyclic multistage production and inventory system to meet the finished product demand under the constraint of finite intermediate storage. Intermediate storage is a practical way to mitigate the material flow imbalance through the line of supply and demand chain. However, the cost of constructing and operating storage facilities is becoming substantial because of increasing land value, environmental and safety concern. Therefore, reasonable decision-making about the capacity of processes and storage units is an important subject for industries. The industrial solution for this subject is to use the classical economic lot sizing method, EOQ/EPQ(Economic Order Quantity/Economic Production Quantity) model, incorporated with practical experience. But EOQ/EPQ model is not suitable for the chemical plant design with highly interlinked processes and storage units because it is developed based on single product and single stage. This study overcomes the limitation of the classical lot sizing method. The superstructure of the plant consists of the network of serially and/or parallelly interlinked non-continuous processes and storage units. The processes transform a set of feedstock materials into another set of products with constant conversion factors. A novel production and inventory analysis method, PSW(Periodic Square Wave) model, is applied to describe the detail material flows among equipments. The objective function of this study is minimizing the total cost composed of setup and inventory holding cost. The advantage of PSW model comes from the fact that the model provides a set of simple analytic solutions in spite of realistic description of the material flows between processes and storage units. the resulting simple analytic solution can greatly enhance the proper and quick investment decision for the preliminary plant design problem confronted with economic situation.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.409-416
• /
• 2015

Purpose: This study evaluates a new banana bulk packaging method under the real transport conditions of Sri Lanka. Methods: A field evaluation of optimized 8-mm thick Styrofoam sheets used as the cushioning material was applied. A trial transport was conducted from Thambuttegama to Colombo using a medium-sized open truck, with banana leaves as the control material. Data were recorded at the farmer, transporter, retailer, and consumer stages of the supply chain. Mechanical damage, physiological loss in weight, fruit firmness, total soluble solids, ripeness index, visual quality ratings, and the physical damage index of the bananas were measured at each stage. A cost-benefit analysis was also conducted for both packaging methods. Results: The 8-mm styrofoam sheets significantly reduced (p < 0.05) the mechanical damage from 26.3% to 12.9% compared to the conventional method for long-distance transport, and the physiological loss in weight showed a decrease of 2.88%. The loss of firmness of the fruits followed a simmilar pattern for both methods until reaching the retailer, but at the consumer was significantly higher (p < 0.05) for the control. However, the physical damage index at the retail stage for the control showed symptoms of physical injury, whereas the bananas transported using the cushioning materials exhibited only minor symptoms. Further, the visual quality of the fruits after transport from the farmer to the consumer was preserved, which is one of the main factors affecting consumer preference and retail price. The proposed method increases the profit margin by 51.2% for Embul bananas owing to the reduced postharvest losses. Conclusion: The 8-mm thick Styrofoam sheets reduced the physical damage to the bananas, with the quality parameters maintained at the prefered level. Moreover, profits may be increased.

• 상하수도학회지
• /
• 제32권5호
• /
• pp.435-443
• /
• 2018

Most of aged water supply pipes have been replaced by the open cut method. However, this method has some limitations because water pipes, in many cases, are buried together with other underground facilities or are buried in the middle of high-traffic roads or in narrow alleyways where boring machines cannot be used. This research developed a pipe bursting device for small diameter pipes that enables pipe replacement without excavating the ground, by the busting of existing buried pipes followed by the traction and insertion of new pipes. As a results of examining the field applicability of the developed device, PE pipes and PVC pipes required the tractive force of 413.65~665.69 kgf and 457.43~791.35 kgf respectively, plus an additional 30 % tractive force per elbow. The proper number of bursting head was demonstrated that the connection of more than 2 heads could secure a stable bending radius of 15D. The developed device can be improved through field experiments involving various pipe types and pipe diameters, as well as presence/absence of elbow, so as to be utilized regardless of diverse variables according to the conditions of the soils surrounding existing pipes.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권6호
• /
• pp.72-84
• /
• 2008

본 연구는 논산지역 마을상수도를 대상으로 수질 모니터링, 수리지화학적 고찰 및 다변량 통계분석을 통하여 수질에 관한 문제점과 원인을 규명하고 타당한 관리 방안을 마련하고자 수행되었다. 논산지역은 마을상수도 이용이 많은 전형적인 농촌지역으로 지질은 화강암이 가장 넓은 면적을 차지하며 옥천대 변성퇴적암, 편마암과 화산암이 분포한다. 마을상수도의 수질 모니터링 결과 전국 평균인 2.5%보다 5-8배 높은 13-21% 정도가 수질기준을 초과하였으며 주요 오염성분은 질산성질소, 탁도, 총대장균, 일반세균, 불소 및 비소로 조사되었다. 연구지역 남쪽과 북쪽에서 높게 나타나는 질산성질소 오염의 주요 원인으로서 비닐하우스 같은 시설영농의 영향이 가장 큰 것으로 나타났다. 마을상수도 수질은 Ca와 $HCO_3$가 지배적이나 화강암 지역에서는 농경지와 주거지 등의 인위적인 오염의 영향으로 Na, Cl 및 $NO_3$가 증가되었다. 주성분분석 결과 주로 농경과 인위적 오염의 영향을 나타내는 주성분 2에 의하여 크게 두 개의 그룹인 화강암과 편마암 및 옥천대 지하수로 구분된다. 판별분석은 초기 지질분류와 판별분석 예측결과의 오차가 5.56%로서 주성분분석보다 더 명확하게 각 지질별 지하수 특징을 보여준다. 다변량 통계분석은 수리지화학적 특성의 종합적 분석을 가능하게 하여 지질특성에 의한 지하수 수질의 변화를 명확하게 구분할 수 있는 방법으로 사료되었다. 논산시 마을상수도 수질에 대한 연구결과는 지질에 의해 영향받는 토지이용, 토양 특성 및 지형 등이 복합적으로 작용하여 지하수 수리지화학적 특성을 결정하는 것임을 확인하였다. 따라서 향후 정부 및 지자체의 마을상수도관리는 지질, 토지이용, 지형 및 토양 특성 등에 대한 종합적 자료 구축 및 해석이 필요하다.