Browse > Article
http://dx.doi.org/10.6113/TKPE.2015.20.5.421

A DTC-PWM Control Scheme of PMSM using an Approximated Voltage Function of Voltage Vector  

Kwak, YunChang (Dept. of Mechatronics Engineering, Kyungsung University)
Lee, Dong-Hee (Dept. of Mechatronics Engineering, Kyungsung University)
Publication Information
The Transactions of the Korean Institute of Power Electronics / v.20, no.5, 2015 , pp. 421-428 More about this Journal
Abstract
An advanced direct torque control (DTC) with pulse width modulation (PWM) method is presented in this paper. The duty ratio calculation of the selected voltage vector is based on the voltage functions of the selected voltage vector according to the sector angle. The proposed DTC uses a conventional DTC scheme with six sector divisions and switching rules. However, the winding voltages are supplied by the PWM approach. Furthermore, the duty ratio of the switching voltage vector is determined by the flux, torque error, and motor speed. The base voltage that shall determine the duty ratio can be calculated by approximate voltage functions according to the voltage angle. For the calculation of base voltages, second-order quadratic functions are used to express the output voltage of the selected voltage vector according to voltage angle. The coefficients for the second-order quadratic functions are selected by the voltage vector, which is determined by the switching rules of the DTC. In addition, the voltage functions are calculated by the coefficients and voltage angle between the voltage vector and rotor position. The switching voltages from the calculated duty ratio can supply the proper torque and flux to reduce the ripple and error. The proposed control scheme is verified through practical experimental comparisons.
Keywords
DTC-PWM(Direct Torque Control-Pulse Width Modulation); PMSM; Approximated voltage function; Voltage vector analysis;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 M. Depenbrock, "Direct self-control of inverter-fed machine," IEEE Trans. Power Electronics, Vol. 3, No. 4, pp. 420-429, Oct. 1988.   DOI
2 Y. Inoue, S. Morimoto, M. Sanada, "Examination and linearization of torque control system for direct torque controlled IPMSM," IEEE Trans. on Industry Applications, Vol. 46, No. 1, pp. 159-166, 2010.   DOI
3 M. E. Haque, M. F. Rahman, "Incorporating control trajectories with the direct torque control scheme of interior permanent magnet synchronous motor drive," IET Trans. on Electric Power Applications, Vol. 3, No. 2, pp. 93-101, Mar. 2009.   DOI
4 I. Takahashi, Y. Ohmori, "High-performance direct torque control of an induction motor," IEEE Trans. on Industry Applications, Vol. 25, No. 2, pp. 257-264, Mar. 1989   DOI
5 J. Maes, J. A. Melkebeek, "Speed-sensorless direct torque control of induction motors using an adaptive flux observer," IEEE Trans. on Industry Applications, Vol. 36, No. 3, pp. 778-785, Jun. 2000.   DOI
6 J. K. Kang , S. K. Sul, "New direct torque control of induction motor for minimum torque ripple and constant switching frequency," IEEE Trans. on Industry Applications, Vol. 25, No. 5, pp. 1076-1082, 1999.
7 Y. Zhang, J. Zhu, "Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency," IEEE Trans. on Power Electronics, Vol. 26, No. 1, pp. 235-248, 2011.   DOI
8 W. Wang, M. Cheng, Z. Wang, B. Zhang, "Fast switching direct torque control using a single DC-link current sensor," Journal of Power Electronics, Vol. 12, No. 6, pp. 895-903, 2012.   DOI   ScienceOn
9 S. Sayeef, M. F. Rahman, "Improved flux and torque estimators of a direct controlled interior PM machine with compensations for dead-time effects and forward voltage drops," Journal of Power Electronics, Vol. 9, No. 3, pp. 438-446, May, 2009.
10 C. French and P. Acarnley, "Direct torque control of permanent magnet drives," IEEE Trans. Ind. Applicat., Vol. IA-32, pp. 1080-1088, Sep./Oct. 1996.
11 L. Romeral, A. Fabrega, J. Cusido, A. Garcia, J. A. Ortega, "Torque ripple reduction in a PMSM driven by direct torque control," Power Electronics Specialists Conference, 2008. PESC 2008. IEEE, pp. 4745-4751, Jun. 2008.
12 W. Qian, S. K. Panda, J. X. Xu, "Speed ripple minimization in PM synchronous motor using iterative learning control," IEEE Trans. Energy Conversion, Vol. 20, pp. 53-61, 2005, March.   DOI
13 Fayez F. M. El-Sousy, "Robust adaptive wavelet-neural-network sliding-mode speed control for a DSP-based PMSM drive system," Journal of Power Electronics, Vol. 10, No. 5, pp. 505-517, 2010.   DOI
14 K. B. Lee, J. H. Song, I. Choy, J. Y. You, "Torque ripple reduction in DTC of induction motor driven by 3-level inverter," Trans. on Korean Institute of Power Electronics, Vol, 5, No. 12, 2000.
15 T. G. Habetler, F. Profumo, M. Pastorelli, L. M. Tolbert, "Direct torque control of induction machines using space vector modulation," IEEE Trans. on Industry Applications, Vol. 28, No. 5, pp. 1045-1053, 1992.   DOI
16 Z. Zhang, R. Tang, B. Bai, and D. Xie, "Novel direct torque control based on space vector modulation with adaptive stator flux observer for induction motors," IEEE Trans. on Magnetics, Vol. 46, No. 8, pp. 3133-3136, 2010.   DOI