• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.7-13
• /
• 2017

In this paper, we propose a novel dynamic subchannel grouping (DSG) algorithm to maximize the system capacity considering intended proper outage probability for the downlink of enterprise small-cell networks (ESNs). In the proposed DSG scheme, a local gateway (LGW) which is installed in a building dynamically divides the frequency bandwidth into different numbers of subchannel groups (SGs) based on the numbers of small-cell access points (SAPs) and small-cell user equipments (SUEs) per floor. Then, the LGW assigns the SGs to SAPs and the SAPs allocate them to their serving SUEs. Through simulation results, we show that the proposed DSG scheme is appropriate for the ESNs compared to the conventional small-cell networks in which all SAPs use the number of fixed SGs in terms of the system capacity and outage probability.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.99-105
• /
• 2009

This research presents the method to decide proper locations for destressing of CWR using a non-destructive equipments to measure the longitudinal force(installation temperature) in CWR. The effect and necessity of destressing were analyzed by estimating changes of longitudinal force. The installation temperature was measured to find changes of longitudinal force in high speed and conventional lines before and after destressing or track maintenance at the locations where destressing was planed or where change of longitudinal force was expected during track maintenance. Past destressing was carried out within qualitative decision criteria. This research proposes the quantitative criteria to decide the priority order of the destressing locations reasonably by considering the difference of air temperature and stress free temperature during the track maintenances, the grade of ballast resistance force recovering and the length of destressing, etc.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.51-55
• /
• 2004

In the design stage of high precision manufacturing/inspection FAB facilities, it is necessary to investigate the allowable vibration limits of high precision equipments and to study structural dynamic characteristics of C/R and Sub-structure in order to provide structural vibration criteria to satisfy these allowable limits. The goal of this study is to investigate the dynamic characteristics of PC-Type mock-up structures designed for next generation TFT-LCD FAB through experiments and analysis procedures. Therefore, in order to provide a proper dynamic structural design for high precision manufacturing/inspection work process, these allowable limits must be satisfied.

• Particle and aerosol research
• /
• v.13 no.4
• /
• pp.165-172
• /
• 2017

For precise particle measurements in combustion environments, various dilution sampling methods were compared. Dilution equipments using dilution tunnels and hot/cold dilution with porous tube dilutors were most frequently used so far. The combination of porous tube dilutor and ejector diluter has relatively small footprint, and it results in lower particle losses compared to other methods. To determine the portion of condensable particulate matter, proper temperature control and flow control is required.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.9-15
• /
• 2012

Vibrational film has been more employed in ear-phones or small type of speakers along with a wide use of portable multi-media equipments such as MP3 and MP4. However, the current hand work production process of diaphragms is inefficient. In this study, a die-and-mold and a single production forming machine are developed, and they result in a multi-production forming machine. The multi-production forming machine consists primarily of a film feeding unit and an unwinding unit. A vacuum suction device provides the film feeding unit, while the unwinding unit is obtained using an appropriate damper. The advantage of the developed single production forming machine is shown according to a proper voice test.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.462-467
• /
• 2002

New methods for screw and spline production has been developed recently by Japan and other developed countries in the basis of Rolling Dies work to cut down the production cost. These methods give us high precision of the products. But we in Korea mostly import Dies for manufacturing forming products. It is thought that if we don't develop our own technology for Rolling Dies, we will have to spend much money for importing Forming concerned equipments. In this paper, we designed the rolling dies based on the diameter of material and calculated the proper number of teeth of gear to establish desirable method for Rolling dies. And the result is shown after manufacturing Involute spline with the rolling dies.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.59-69
• /
• 2007

The main objective of this study is to suggest the new sizing system proper to the boys in the high school students by classifying their somatotype for the development of educational environment and uniform. The sample for this work was chosen from data which were collected and measured by Size Korea during two years $(2003\sim2004)$. In order to analyze feature of the somatotype of boys in the high school students, analysis was performed about 479 subjects on 37 body parts such as height (9 parts), width (5 parts), thickness (6 parts), circumference (7 parts), length (8 parts), body weight and $R\ddot{o}hrer$ Index. The result of this study can be utilized in various fields such as design of classroom, student uniforms, facilities and equipments for education at high school and university, etc.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.969-975
• /
• 2005

A rail heating system can be classified as the method which uses a natural phenomena change in climate condition and the method which uses electric energy. The former uses a the sunshine and wind for frozen rail or snow. On the other hand, and the latter uses the electric energy. In this paper, to set up an effective thaw system in railway facilities using the electric energy, the component for thaw equipments, the installing method, the method for temperature regulation, and the maintenance technique will be analyzed and compared, which results in an introduction of an effective and economic scheme for respective railway systems. Although the portion of thaw system is not quite large in the entire railway facilities, a significant energy saving and cost reduction can be expected if the proper system is employed.

• Journal of the military operations research society of Korea
• /
• v.31 no.2
• /
• pp.75-85
• /
• 2005

Even though K-series combat equipment's engine depot maintenance cycle of ROK army is 10years In average, that of the K-9 Self Propelled(SP) howitzer which has been fielded since 99 $3{\sim}4$years causing limitations to effective equipment operations and combat-readiness. Therefore, the current K-9 self-propelled howitzer engine operation period of 1,500 hours, which is greatly shorter than other equipments, had to be verified. In order to find the optimum depot maintenance cycle, related field operation conditions were verified and opinions were collected, and also the background on current depot maintenance cycle setting was studied.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.239-241
• /
• 2001

Recently the power supply equipments have tendency to take multiple feedback loop paths. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the gurantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test results. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency $f_c$, is nearly 1/5 of switching frequency $f_s$, from the experimental result with frequency response analyzer.