• 제목/요약/키워드: Propagation time

검색결과 2,219건 처리시간 0.03초

탄성파의 매질 내 이동속도 산정방법 비교 (Comparison in Elastic Wave Propagation Velocity Evaluation Methods)

  • 김태식
    • 한국지반환경공학회 논문집
    • /
    • 제15권5호
    • /
    • pp.31-37
    • /
    • 2014
  • 탄성파는 지반 및 지반환경 관련 과업에서 다양한 형태로 활용되어 왔다. 일반적으로는 현장에서 탄성파 탐사를 수행하여 시추조사와 더불어 지반의 물성값을 평가하는 목적으로 사용되고 있으며, 지하공동의 위치파악 등에도 사용되고 있다. 환경복원이 필요한 버려진 부지에 매립된 유류 저장시설의 위치 파악 등 지반환경공학과 관련하여서도 탄성파의 활용은 활발히 이루어지고 있다. 또한 지반의 미소변형률 구간에서의 지반 거동 분석에도 탄성파를 활용하고 있다. 탄성파의 매질 내 이동속도가 주요 인자로서 활용되고 있는데, 이는 시간 영역과 주파수 영역에서 산정할 수 있다. 시간 영역에서의 탄성파의 이동속도 평가방법은 동일 위상을 갖는 특정한 점들의 시간차이를 분석하는 방법, 상호상관법을 활용한 방법으로 나뉠 수 있다. 주파수 영역에서의 탄성파의 이동속도는 진원과 수신점에서의 입력 파형과 수신파형의 위상 차이를 분석하여 산정할 수 있다. 본 연구에서는 시카고 지역에서 채취한 불교란 빙하퇴적 점성토 시료에 벤더 엘리먼트를 이용한 탄성파 시험을 실시, 동일한 탄성파에 대해 여러 가지 산정 방법을 적용하여 탄성파의 이동속도를 분석하였다. 시간영역에서 탄성파의 이동속도를 분석한 결과 데이터로거의 표본화 주파수에 영향을 크게 받는 것으로 분석되었으며, 신호에 포함되어있는 노이즈 및 수신파형의 요철 특성으로 인하여 같은 위상을 갖는 점을 정확히 찾는 것은 불가능하였다. 상호상관법으로 분석한 경우도 입력 파형과 수신파형의 주기의 차이로 인해 탄성파의 정확한 이동속도를 산정하는 것은 불가능하였다. 주파수 영역에서의 이동속도 산정의 경우 영채우기를 통해 주파수 분해능을 개선시킬 수 있어 데이터로거의 표본화 주파수에 영향을 받지 않았다. 과도파 사용으로 인한 지배주파수가 유일 값이 아닌 범위로 나타나는 단점이 있었으나, 지배주파수 범위 내의 탄성파의 이동속도의 범위는 시간 영역에서 산정한 값보다 정밀한 것으로 나타났다.

국내 인프라사운드 전파특성 연구 (Infrasound Wave Propagation Characteristics in Korea)

  • 제일영
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.63-69
    • /
    • 2000
  • Korea Institute of Geology Mining and Materials(KIGAM) cooperating with Southern Methodist University(SMU) has been operating seismo-acoustic array in Chul-Won area to discriminate man-made explosions from natural earthquakes since at the end of July 1999. In order to characterize propagation parameters of detected seismo-acoustic signal and to associate these signals as a blast event accompanying seismic and acoustic signals simultaneously it is necessary to understand infrasound wave propagation in the atmosphere. Two comparable Effective Sound Velocity Structures(ESVS) in atmosphere were constructed by using empirical model (MSISE90 and HWM93) and by aerological observation data of Korea Meteorological Administration (KMA) at O-San area. Infrasound propagation path computed by empirical model resulted in rare arival of refracted waves on ground less than 200km from source region. On the other hand Propagation paths by KMA more realistic data had various arrivals at near source region and well agreement with analyzed seismo-acoustic signals from Chul-Won data. And infrasound propagation in specific direction was very influenced by horizontal wind component in that direction. Linear travel time curve drawn up by 9 days data of the KMA in autumn season showed 335.6m/s apparent sound velocity in near source region. The propagation characteristics will be used to associate seismo-acoustic signals and to calculate propagation parameters of infrasound wave front.

  • PDF

정적연소기에서 점화에너지와 점화장치가 화염전파속도에 미치는 영향에 관한 연구 (A Study on the Effects of Ignition Energy and Systems on the Flame Propagation in a Constant Volume Combustion Chamber)

  • 송정훈;서영호;선우명호
    • 한국자동차공학회논문집
    • /
    • 제9권1호
    • /
    • pp.45-56
    • /
    • 2001
  • A constant volume combustion chamber is employed to investigate the initial flame kernel development and flame propagation of gasoline-air mixtures with various ignition systems, ignition energy and spark plug electrodes. To do this research, four ignition systems are designed and manufactured, and the ignition energy is controlled by varying the dwell time. Several kinds of spark plugs are also made to analyze the effects of electrodes on flame kernel development. The velocity of flame propagation is measured by the laser deflection method. The output laser beam from He-Ne laser is divided into three parallel beams by a beam splitter. The splitted beams pass through the combustion chamber. They are deflected when contacted with flame front, and the voltage signals from photodiodes change due to deflection. The results show that higher ignition energy raises the flame propagation speed especially under the fuel lean operation. The wider electrode gap, smaller electrode diameter and sharper electrode tip make the speed of the initial flame propagation faster. The speed of the initial flame propagation is affected by electrode material as well. Electrode material with lower melting temperature help the initial flame propagation.

  • PDF

Plane-converging Belief Propagation을 이용한 고속 스테레오매칭 (Fast Stereo matching based on Plane-converging Belief Propagation using GPU)

  • 정용한;박은수;김학일;허욱열
    • 대한전자공학회논문지SP
    • /
    • 제48권2호
    • /
    • pp.88-95
    • /
    • 2011
  • 스테레오 매칭은 두 영상의 차이를 이용하여 거리를 추정하는 연구 분야로 성능 개선과 함께 처리속도 향상을 위한 연구가 계속되고 있다. 본 논문에서는 계층적 Belief Propagation(BP) 알고리즘을 개선하여 기존의 BP에서의 수렴구간을 메시지 맵으로 만들고 이를 이용하여 처리속도를 향상시키는 Plane-converging BP 알고리즘을 제안한다. 또한 GPU 아키텍쳐인 Nvidia의 CUDA를 이용하여 다수의 계산을 병렬화 하고 이를 동시에 처리하여 실시간 어플리케이션에 적합한 스테레오 매칭 기법을 개발하였다. Plane-converging BP 알고리즘은 기존의 계층적 BP 알고리즘과 유사한 에러율을 가지면서 약 2.7배의 속도 향상을 이루었다.

황해에서 저주파 음파의 해저손실 변동 (Bottom Loss Variation of Low-Frequency Sound Wave in the Yellow Sea)

  • 김봉채
    • Ocean and Polar Research
    • /
    • 제29권2호
    • /
    • pp.113-121
    • /
    • 2007
  • The sound wave in the sea propagates under the effect of water depth, sound speed structure, sea surface roughness, bottom roughness, and acoustic properties of bottom sediment. In shallow water, the bottom sediments are distributed very variously with place and the sound speed structure varying with time and space. In order to investigate the seasonal propagation characteristics of low-frequency sound wave in the Yellow Sea, propagation experiments were conducted along a track in the middle part of the Yellow Sea in spring, summer, and autumn. In this paper we consider seasonal variations of the sound speed profile and propagation loss based on the measurement results. Also we quantitatively investigate variation of bottom loss by dividing the propagation loss into three components: spreading loss, absorption loss, and bottom loss. As a result, the propagation losses measured in summer were larger than the losses in spring and autumn, and the propagation losses measured in autumn were smaller than the losses in spring. The spreading loss and the absorption loss did not show seasonal variations, but the bottom loss showed seasonal variations. So it was thought that the seasonal variation of the propagation loss was due to the seasonal change of the bottom loss and the seasonal variation of the bottom loss was due to the change of the sound speed profile by season.

잡음 영상에서 불균등 돌연변이 연산자를 이용한 효율적 에지 검출 (Edge detection method using unbalanced mutation operator in noise image)

  • 김수정;임희경;서요한;정채영
    • 정보처리학회논문지B
    • /
    • 제9B권5호
    • /
    • pp.673-680
    • /
    • 2002
  • 이 논문은 진화 프로그래밍과 개선된 역전파 알고리즘을 이용한 에지 검출 방법을 제안한다. 진화 프로그래밍은 알고리즘의 성능저하와 계산비용을 고려하여 교차 연산은 수행하지 않고, 선택연산자와 돌연변이 연산자를 사용한다. 개선된 역전파 알고리즘은 학습단계에서 연결강도를 변화시킬 때 이전학습단계의 연결강도를 보조적으로 활용하는 방법이다. 이 개선된 역전파 알고리즘은 학습률 $\alpha$를 작은값으로 설정하기 때문에 각 학습단계에서의 연결강도 변화량이 기존의 방법에 비해 상대적으로 줄어들게 되어 학습이 느려지는 문제점을 해결하였다. 실험결과 학습시간과 검출률에 있어서 GA-BP(GA : Genetic Algorithm BP : Back-Propagation)를 이용한 방법보다 제안한 EP-MBP(EP : Evolutionary Programming, MBP :Momentum Back-Propagation)를 이용하여 학습시킨 방법이 학습시간의 단축과 효율적인 에지 검출 결과를 얻을 수 있었다.

시간-주파수 해석법에 의한 5083 알루미늄의 피로균열 진전에 의할 음향방출 신호의 주파수특성 (Frequency Characteristics of Acoustic Emission Signal from Fatigue Crack Propagation in 5083 Aluminum by Joint Time-Frequency Analysis Method)

  • 남기우;이건찬
    • 한국해양공학회지
    • /
    • 제17권3호
    • /
    • pp.46-51
    • /
    • 2003
  • Acoustic emission (AE) signals, emanated during local failure of aluminum alloys, have been the subject of numerous investigations. It is well known that the characteristics of AE are strongly influenced by the previous thermal and mechanical treatment of the sample. Possible sources of AE during deformation have been suggested as the avalanche motion of dislocations, fracture of brittle particles, and debonding of these particles from the alloy matrix. The goal of the present study is to determine if AE occurring as the result of fatigue crack propagation could be evaluated by the joint time-frequency analysis method, short time Fourier transform (STFT), and Wigner-Ville distribution (WVD). The time-frequency analysis methods can be used to analyze non-stationary AE more effectively than conventional techniques. STFT is more effective than WVD in analyzing AE signals. Noise and frequency characteristics of crack openings and closures could be separated using STFT. The influence of various fatigue parameters on the frequency characteristics of AE signals was investigated.

기억논리소자에서의 전달지연시간에 의한 Critical Time의 변화 양상 고찰 (A Study on the Effect of Propagation Delay Time on Critical Time in Storage Elements)

  • 주유진;이선형;류지호;이상훈;성영권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 B
    • /
    • pp.922-924
    • /
    • 1995
  • The modeling of accurate timing in storage elements of ASIC cell library was studied. The propagation delay time of clock signal affects the critical time and this can cause malfunction in the chip designed in synchronous. In this paper, an analysis on the effect of input slope of clock signal in timing modeling were carried out. For the first time, in ASIC design, the design guides that can be used in both $0.6{\mu}M$ and $0.8{\mu}m$ design rule were offered, reducing the run time of SPICE and the time of cell library development.

  • PDF

역전파 ANN을 위한 고정 크기 시스톨릭 어레이 설계 (Design of the Fixed Size Systolic Array for the Back-propagation ANN)

  • 김지연;장명숙;박기현
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
    • /
    • pp.691-693
    • /
    • 1998
  • A parallel processing systolic array reduces execution time of the Back-propagation ANN. But, systolic array must be designed whenever the number of neurons in the ANN differ. To use the systolic array which is aready designed ad a fixed size VLSI chip, partition of the problem size systolic array must be performed. This paper presents a design method of the fixed size systolic array for the Back-propagation algorthm using LSGP and LPGS partion method

  • PDF

Fourier 방법을 이용한 불균일 고체의 탄성파전달해석 (An analysis of elastic wave propagation in inhomogeneous solids using the Fourier method)

  • 김현실
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
    • /
    • pp.327-330
    • /
    • 1998
  • Wave propagation in inhomogeneous elastic media is studied by using the Fourier method, where the spatial derivatives are computed by the FFT algorithm, while the time derivatives are expanded into the second order finite different expansion. For numerical examples, wave propagation in the layered half-plane are investigated. The comparisons of numerical and analytic results shows good agreement.

  • PDF