• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.99-102
• /
• 2005

In the paper, a proposed VCO based on bondwire inductances and nMOS varactors was implemented in a standard $0.25\;{\mu}m$ CMOS process. Using the new drain current model and a propagation delay time model equations, the operation speed of CMOS gate will predict the dependence on the load capacitance and the depth of oxide, threshold voltage, the supply voltage, the channel length. This paper describes the result of simulation which calculated a gate propagation delay time by using new drain current model and a propagation delay time model. At the result, When the reverse bias voltage on the substrate changes from 0 voltage to 3 voltage, the propagation delay time is appeared the delay from 0.8 nsec to 1 nsec. When the reverse voltage is biased on the substrate, for reducing the speed delay time, a supply voltage has to reduce. The $g_m$ value of MOSFET is calculated by using new drain current model.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.33-41
• /
• 2010

Crack propagation mechanisms of Sn-3.0Ag-0.5Cu solder were studied in strain controlled push-pull creepfatigue conditions using the fast-fast (pp) and the slow-fast (cp) strain waveforms at 313 K. Transgranular cracking was found in the pp strain waveform which led to the cycle-dominant crack propagation and intergranular cracking in the cp strain waveform that led to the time-dominant crack propagation. The time-dominant crack propagation rate was faster than the cycle-dominant crack propagation rate when compared with J-integral range which resulted from the creep damage at the crack tip in the cp strain waveform. Clear recrystallization around the crack was found in the pp and the cp strain waveforms, but the recrystallized grain size in the cp strain waveform was smaller than that in the pp strain waveform. The cycle-dominant crack propagated in the normal direction to the specimen axis macroscopically, but the time-dominant crack propagated in the shear direction which was discussed in relation with shear micro cracks formed at the crack tip.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.52-57
• /
• 2000

We investigated the fatigue crack propagation of base metal, weld metal and heat attected zone in 316L stainless steel. And we analysed acoustic emission signals during the fatigue test by time-frequency analysis method. The specimens of weld metal and HAZ had longer fatigue life and slower rate of crack propagation better than base metal. And as a result of time-frequency was 200-300 kHz was obtained by fatigue crack propagation and 500 kHz was obtained by dimple and separate of inclusion.

• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.232-240
• /
• 2013

This paper presents recent advances in damage visualization algorithms of laser generated ultrasonic propagation imaging(UPI) system. An effective damage evaluation method is required to extract correct information from raw data to properly characterize anomalies present in structure. A temporal-reference free imaging system provides easy and rapid defect inspection capability with less computational complexity. In this paper a number of methods such as ultrasonic wave propagation imaging(UWPI), anomalous wave propagation imaging(AWPI), ultrasonic spectral imaging(USI), wavelet ultrasonic propagation imaging(WUPI), variable time window amplitude mapping(VTWAM), time point adjustment(TPA), time of flight and amplitude mapping(ToF&Amp) and ultrasonic wavenumber imaging(UWI) are discussed with instances of successful implementation on various structures.

• 한국항행학회논문지
• /
• 제23권5호
• /
• pp.392-399
• /
• 2019

본 논문에서는 이동체간 전파지연을 고려한 무선 TDD(time division duplex) 시각 동기화 기법에 대하여 연구하였다. 기존 IEEE 1588 PTP 알고리즘을 응용하였으며, 무선 TDD 통신 시 마스터/슬레이브 노드간 계산된 전파지연 및 클럭 오프셋 시각 보정을 통해 두 노드간의 시각 동기화를 이루게 하였다. IEEE 1588 PTP 알고리즘의 시각 동기화 과정 및 절차를 최적화하였으며, 이를 통해 실시간으로 이동하는 이동체에 대한 전파지연 오차 민감도를 감소시켰다. 시각 보정을 통해 생성된 sync flag 신호는 시험 및 측정값을 통해 1-symbol (1.74 M symbol/sec, ${\pm}287.35ns$) 이내의 최대 +252.5 ns 시각 동기화 정밀도를 갖는 것을 확인하였으며, GPS(global positioning system) 교란 시 생성된 sync flag 신호를 통해 마스터/슬레이브 노드간 시각 동기화를 이룰 수 있음을 확인하였다.

• 한국음향학회지
• /
• 제39권3호
• /
• pp.216-225
• /
• 2020

본 논문은 음선 경로법에 기반한 광대역 수중음향 전달 채널을 모델링하는 방법을 다루었다. 수중음향 전달 채널은 종종 주파수 영역에서 시간 조화 함수로 취급되어, 광대역 시계열 신호 모의 시 활용이 어렵다. 따라서 수중 음파 전달 환경을 반영한 광대역 시간영역 모델링 기법이 요구되며, 본 논문에서는 이를 위해 시간영역에서 다중 경로의 도달 시간지연이 계산 가능한 고유 음선 분석 기법을 활용하였다. 또한 연속 시간의 파동방정식으로부터 산출된 고유 음선의 분석 결과를 컴퓨터 모의가 가능한 이산시간 시스템에 적용하기 위해, 음선의 위상, 주파수별 손실 및 도달 시간지연을 유한 임펄스 응답으로 근사하여, 광대역 수중음향 전달 채널을 모의하는 방법을 제안하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.253-257
• /
• 2004

Neural networks are works are used in the framework of sensor based tracking control of robot manipulators. They learn by practice movements the relationship between PSD(an analog Position Sensitive Detector) sensor readings for target positions and the joint commands to reach them. Using this configuration, the system can track or follow a moving or stationary object in real time. Furthermore, an efficient neural network architecture has been developed for real time learning. This network uses multiple sets of simple back propagation networks one of which is selected according to which division(corresponding to a cluster of the self-organizing feature map) in data space the current input data belongs to. This lends itself to a very training and processing implementation required for real time control.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2011-2014
• /
• 2008

We measured the permittivity and electromagnetic wave propagation velocity of used insulation oil with wide frequency range including ultra-high frequency by time domain reflectometry. The permittivity or propagation velocity is essential for locating discharge faults of oil filled power transformer. We derived 2.21 as a permittivity and $2.03{\times}10^8 m/s$ as a velocity from the measurement of pulse travelling time along a coaxial line filled with used insulation oil or air. The permittivity measurement system we designed shows high measurement accuracy and the convenience for field use.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.905-910
• /
• 2003

In this paper, we develop real-time monitoring system to detect third-party damage on natural gas pipeline by using sound propagation model. Since many third-party incidents cause damage that does not lead to immediate rupture but can grow with time, the developed real-time monitoring system can execute a significant role in reducing many third-party damage incidents. The developed system is composed of three steps as follows: i) DSP based system, ii) wireless communication system, iii) the calculation and monitoring software to detect the position of third-party damage using the propagation speed of acoustic wave. Furthermore, the developed system was set at practical offshore pipeline between two islands in Korea and it has been operating in real time.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.167-172
• /
• 2004

Neural networks are used in the framework of sensor based tracking control of robot manipulators. They learn by practice movements the relationship between PSD(an analog Position Sensitive Detector) sensor readings for target positions and the joint commands to reach them. Using this configuration, the system can track or follow a moving or stationary object in real time. Furthermore, an efficient neural network architecture has been developed for real time learning. This network uses multiple sets of simple back propagation networks one of which is selected according to which division (Corresponding to a cluster of the self-organizing feature map) in data space the current input data belongs to. This lends itself to a very training and processing implementation required for real time control.