• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.922-924
• /
• 1995

The modeling of accurate timing in storage elements of ASIC cell library was studied. The propagation delay time of clock signal affects the critical time and this can cause malfunction in the chip designed in synchronous. In this paper, an analysis on the effect of input slope of clock signal in timing modeling were carried out. For the first time, in ASIC design, the design guides that can be used in both $0.6{\mu}M$ and $0.8{\mu}m$ design rule were offered, reducing the run time of SPICE and the time of cell library development.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.42-47
• /
• 2011

제곱기의 부분곱 행렬은 대칭이므로 부분곱을 폴딩(folding), 쉬프트, 재배열하여 부분곱 행렬의 높이를 줄일 수 있다. 본 논문에서는 기존 제곱기와 비교하여 효율적인 제곱기의 설계 방법을 제안한다. 또한, 제안한 제곱기에 대해 고정길이 제곱기의 설계 방법을 제안한다. 시뮬레이션을 통해 제안한 제곱기는 기존 제곱기와 비교하여 면적은 약 17%, 지연시간(propagated delay time)은 약 10%, 전력소모는 약 10%까지 감소시킬 수 있음을 보인다. 제안한 고정길이 제곱기는 기존 고정길이 제곱기와 비교하여 절대오차와 평균오차의 성능비교에서 우수하면서, 일반 제곱기(full-width)와 비교하여 면적, 지연시간, 전력소모를 각각 30%, 16%, 28%까지 감소시킬 수 있음을 보인다.

• 화약ㆍ발파
• /
• 제8권1호
• /
• pp.3-16
• /
• 1990

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill $\varphi{70mm}$ on the calcalious sand stone(sort-moderate-semi hard Rock). The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites (m) W : Maximum Charge per delay-period of eighit milliseconds or more(Kg) K : Ground transmission constant, empirically determind on th Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity $D/W^b$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m----under l00m----- $V=41(D/3\sqrt{W})^{-1.41}$ -----A Over l00m-----$V= 121(D/3\sqrt{W})^{-1.66}$-----B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 화약ㆍ발파
• /
• 제9권4호
• /
• pp.3-12
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M /S delay caps. Drill depth was from 3m to 6m with Crawler Drill 70mm on the calcalious sand stone (soft-moderate-semi hard Rock) . The total numbers of feet blast were 88. Scale distance were induces 15.52-60.32. It was applied to Propagation Law in blasting vibration as follows .Propagtion Law in Blasting Vibration V=k(D/W/sup b/)/sup n/ where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W ; Maximum Charge per delay -period of eight milliseconds or more(Kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D/W/sup b/ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three groups. Cabic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over loom distance because the frequency is varified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m--under 100m----V=41(D/ W)/sup -1.41/-----A Over l00m---------V=121(D/ W)/sup -1.56/-----B K value on the above equation has to be more specified for furthur understand about the effect of explosives. Rock strength, And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1338-1346
• /
• 2004

The positions of rotating sound sources have been localized by experiments with the Doppler effects removed. In order to de-Dopplerize the sound signals emitted from moving sources, two kinds of signal reconstruction methods were applied. One is the forward propagation method and the other is the backward propagation method. Forward propagation method analyze the source emission time based on the instantaneous distance between sensors and the assumed source position, then the signals are reconstructed with respect to the emission time. On the other hand, the backward method uses time delay to do-Dopplerize the acquired data for the received time of reference. In both techniques. the reconstructed signal data were processed using beamforming algorithm to produce power distributions at the frequencies of interest. Experiments have been carried out for varying frequencies, rotating speeds and the object distances. It is shown that the forward propagation method gives better performance in locating source position than the backward propagation method.

• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• 대한전자공학회논문지TE
• /
• 제37권3호
• /
• pp.6-15
• /
• 2000

본 논문에서는 고속 4-2 compressor와 6-2 compressor 를 사용한 계층적인 구조를 갖는 병렬 곱셈기를 제안한다. 병렬곱셈기는 일반적으로 CSA 덧셈기를 사용한 부분곱 덧셈 트리 블록의 처리속도에 영향을 받는다. 따라서, 본 논문에서는 일반적인 CSA 덧셈기 회로보다 전달 지연시간을 감소시킨 고속 4-2 compressor와 6-2 compressor 회로를 제안한다. 또한, 제안하는 compressor를 사용하여 16×16 병렬곱셈기의 처리속도를 향상시키며 규칙적인 레이아웃을 할 수 있는 계층적 곱셈기 구조를 제안한다. 제안하는 4-2 compressor 회로를 SPICE 시뮬레이션 한 결과 기존의 4-2 compressor 회로에 비하여 전달지연 시간을 14% 감소시킬 수 있었다. 한편 제안하는 4-2 compressor와 6-2 compressor를 사용하여 16×16 비트 병렬곱셈기를 설계한 결과 일반 병렬곱셈기에 비하여 총 전달지연시간이 12% 이상 감소되었다

• 전자공학회논문지 IE
• /
• 제48권2호
• /
• pp.6-11
• /
• 2011

본 논문은 나노 구조에서 ASIC 표준 라이브러리 셀의 특성에 대하여 전파지연시간 측정의 새로운 설계 방법을 제시하였다. 라이브러리 셀((NOR, AND, XOR 등)에 대한 정확한 시간 정보를 제공함으로서 ASIC 설계 흐름 공정의 시간적 분석을 증진시킬 수 있다. 이러한 분석은 기술 공정에서 반도체 파운드리 팀에게 유용하게 사용할 수 있다. CMOS 소자의 전파지연시간과 SPICE 시뮬레이션 은 트랜지스터 파라미터의 정확도를 예측할 수 있다. 위상오차 축적방법 물리적 실험은 반도체 제조공정($0.11{\mu}m$, GL130SB)으로 실현하였다. 표준 셀 라이브러리에서 전파지연시간은 $10^{-12}$초 단위까지 정확성을 측정할 수 있었다. VLSI STPE를 위한 솔루션은 배치, 시뮬레이션, 그리고 검증에 사용할 수 있다.

• Journal of Communications and Networks
• /
• 제18권1호
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

• 융합신호처리학회논문지
• /
• 제12권2호
• /
• pp.107-112
• /
• 2011

GPS의 원자시계 이상 및 신호 취약 현상에 대비하기 위해 유럽의 갈릴레오, 중국의 BEIDOU, 일본의 QZSS 등 세계 선진각국은 GPS에 독립적인 위성항법시스템을 구축하고 있다. 또한, 위성항법시스템의 백업 용도로 지상항법 시스템인 Loran의 현대화 시스템인 eLoran에 대한 연구가 진행되고 있다. 국내에서도 독자항법에 대한 필요성이 거론되며 GPS에 대한 백업 용도로 Loran 시스템의 현대화를 통한 시각동기 인프라로서의 활용성에 대한 요구가 증대되고 있다. Loran 선호는 100Khz 대역으로 지형환경에 영향을 받는 지표파이다. 지표파는 지형의 전도율과 고도에 의해 전파의 전달 시 추가 지연인 ASF가 발생하고 이 추가 지연은 Loran 항법 및 시각동기에 오차를 유발하는 중요한 요소이다. 이에, ASF의 보정 방법은 Loran과 eLoran 항법에 매우 중요하다. 본 논문은 Loran 신호가 지형의 특성에 따라 지연되는 전파 지연 모델을 소개하고 효율적인 전파 지연 보정 방법을 제안하기 위해 전파모델링에 의한 예측값과 실측값을 비교 분석한 결과를 제시한다.